Brake Pedal

usranger74 · 03-05-2011, 11:12 AM

I would like to extend my brake pedal. I was a link on this subject last year but I can not find it now.

Any suggestion on how to extend the pedal?

**Jared** · 03-05-2011, 11:42 AM

A drifter pedal ought to do the trick for you.

http://www.gadgetjq.com/brakepedalstretch.htm

ballast · 03-05-2011, 11:49 AM

Got mine from Cruiser Customizing. Drifter Brake Pedal.

skeeterv · 03-05-2011, 11:50 AM

Quote:

Originally Posted by usranger74

I would like to extend my brake pedal. I was a link on this subject last year but I can not find it now.

Any suggestion on how to extend the pedal?

http://www.scootworks.com/shop.cgi/p...99343664.27381

VulcanE · 03-05-2011, 12:56 PM

Are you asking about making the break lever portion longer, or the brake pedal pad wider? If it's making the lever longer, the above links are good, If it's about making the pad wider, Kurakyn makes a lot of different replacement pads, and most of them are quiet a bit wider than stock. I have the stock lever, and use a Kuryakyn # 8027 brake pedal pad. It sticks out almost as far as the edge of the floorboard. Here's a photo showing it.

**GIBBY** · 03-05-2011, 03:39 PM

The Scootworks pedal is the way to go. Very nice piece and puts the pedal right where it should have been put by MawKaw.

usranger74 · 03-05-2011, 07:08 PM

Quote:

Originally Posted by Gibby

The Scootworks pedal is the way to go. Very nice piece and puts the pedal right where it should have been put by MawKaw.

Those of you who got it from Scootworks, are you talking about the one for the "Nomad". They also have one for the "Drifter"

skeeterv · 03-06-2011, 12:35 AM

Quote:

Originally Posted by usranger74

Quote:

Originally Posted by Gibby

The Scootworks pedal is the way to go. Very nice piece and puts the pedal right where it should have been put by MawKaw.

Those of you who got it from Scootworks, are you talking about the one for the "Nomad". They also have one for the "Drifter"

I would say the Nomad unless you want one in black .

Skeeter

PM sent...........

paul · 03-06-2011, 06:22 AM

I used the Drifter pedal and it was perfect. Set it a little lower than the original, and with the extra length, much easier to use and quicker to find.

A BIT OF TECHNICAL ADVISE: Before you pull the bolt completely, take a small pair of vice grips properly adjusted and grab the spring from below so that the grips hold it in place against the frame. When you have things lined up and ready to reassamble it will be very easy to get the bolt back in and stabbed through. Otherwise, the job is a piece of cake.

Loafer · 03-06-2011, 09:37 AM

The last post by Skeeter confused me.
If you want more room on the floor board, buy a Drifter brake pedal, because it is longer, right?
You don' t want the Nomad brake pedal replacement, because it won't solve the problem.
Am I thinking correctly?

**ringadingh** · 03-06-2011, 09:40 AM

Quote:

Originally Posted by loafer

The last post by Skeeter confused me.
If you want more room on the floor board, buy a Drifter brake pedal, because it is longer, right?
You don' t want the Nomad brake pedal replacement, because it won't solve the problem.
Am I thinking correctly?

Thats the way I read it, The Drifter pedals are a little longer.

Loafer · 03-06-2011, 09:51 AM

Thanks, Steve.
I thought you were blowing snow? I just heard that the temperature is going to drop and we could get another 14" by tomorrow.

**ringadingh** · 03-06-2011, 10:28 AM

You must be getting ready to receive what we got last night, There is about 8" in the driveway. I looked at it and decided to have another coffee before I tackle it. I think Im ready now though. ;)

Loafer · 03-06-2011, 10:34 AM

Steve, be sure you keep your hands and feet out of the way. Oh wait, you said coffee. Anyway take care.

skeeterv · 03-06-2011, 10:52 AM

Quote:

Originally Posted by loafer

The last post by Skeeter confused me.
If you want more room on the floor board, buy a Drifter brake pedal, because it is longer, right?
You don' t want the Nomad brake pedal replacement, because it won't solve the problem.
Am I thinking correctly?

Maybe I can clarify it somewhat?

If referring to OEM levers then yes, the Drifter lever is the way to go rather than a OEM Nomad and is quite an improvement over it.
(I used a OEM Drifter lever prior to installing my Scootworks lever)

My reference was in regards to the Scootworks brake levers. The difference between Scootworks Classic/Nomad vs. Drifter lever appears to be the finish only.

Their site says; Vulcan Drifter Brake Pedal - Available in black powder coat or polished chrome finish.
I'm not 100% positive but the chrome lever they offer for the Drifter is probably the same as THEIR Classic/Nomad pedal.

Contacting Scooterworks PRIOR to purchasing would always be recommended if any doubt exist about it's application though.

Hope that makes it clearer..............

Skeeter

03-05-2011, 11:12 AM	#1
usranger74 Sr. Member Join Date: Mar 2010 Location: La Vista, NE Posts: 4,060	Brake Pedal I would like to extend my brake pedal. I was a link on this subject last year but I can not find it now. Any suggestion on how to extend the pedal? __________________ Bill (usranger74) Blake 2016 Goldwing VBA # 1505 Login or Register to Remove Ads
	0

03-05-2011, 11:42 AM	#2
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	Brake Pedal A drifter pedal ought to do the trick for you. http://www.gadgetjq.com/brakepedalstretch.htm __________________ Jared VBA #1051 (Former President)
	0

03-05-2011, 11:49 AM	#3
ballast Sr. Member Join Date: Mar 2009 Location: Orting, WA Posts: 1,394	Brake Pedal Got mine from Cruiser Customizing. Drifter Brake Pedal. __________________ Charlie "Ballast" Krogh 2005 1600 Nomad "Tangerine Dream" VBA #999 VROC #29355
	0

03-05-2011, 12:56 PM	#5
VulcanE Sr. Member Join Date: Jan 2008 Location: Cartersville, Georgia Posts: 4,838	Brake Pedal Are you asking about making the break lever portion longer, or the brake pedal pad wider? If it's making the lever longer, the above links are good, If it's about making the pad wider, Kurakyn makes a lot of different replacement pads, and most of them are quiet a bit wider than stock. I have the stock lever, and use a Kuryakyn # 8027 brake pedal pad. It sticks out almost as far as the edge of the floorboard. Here's a photo showing it. __________________ Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 Login or Register to Remove Ads
	0

03-05-2011, 03:39 PM	#6
GIBBY Join Date: Oct 2009 Location: Osceola,WI Posts: 3,084	Brake Pedal The Scootworks pedal is the way to go. Very nice piece and puts the pedal right where it should have been put by MawKaw. __________________ Mike "GIBBY" Gibson Osceola, WI VBA # 1279 2011 National Rally 2012 NCR Rally 2012 Antlers Rally 2013 National Rally 2013 Antlers Rally 2014 NC/SC Rally 2014 Antlers Rally 2015 VRA/VBA Rally 2016 NCR Rally 2016 Antlers Rally 2017 Antlers Rally 2018 NC/SC Rally 2018 Antlers Rally 2019 Antlers Rally 2020 Antlers Rally 2022 Antlers Rally 2023 Antlers Rally 2021 Indian Roadmaster Limited 2022 Indian Roadmaster
	0

03-06-2011, 06:22 AM	#9
paul Sr. Member Join Date: Jan 2008 Location: magnolia, tx Posts: 1,500	Brake Pedal I used the Drifter pedal and it was perfect. Set it a little lower than the original, and with the extra length, much easier to use and quicker to find. A BIT OF TECHNICAL ADVISE: Before you pull the bolt completely, take a small pair of vice grips properly adjusted and grab the spring from below so that the grips hold it in place against the frame. When you have things lined up and ready to reassamble it will be very easy to get the bolt back in and stabbed through. Otherwise, the job is a piece of cake. __________________ The beatings will stop when morale improves.
	0

03-06-2011, 09:37 AM	#10
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Brake Pedal The last post by Skeeter confused me. If you want more room on the floor board, buy a Drifter brake pedal, because it is longer, right? You don' t want the Nomad brake pedal replacement, because it won't solve the problem. Am I thinking correctly? __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

03-06-2011, 09:51 AM	#12
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Brake Pedal Thanks, Steve. I thought you were blowing snow? I just heard that the temperature is going to drop and we could get another 14" by tomorrow. __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

03-06-2011, 10:28 AM	#13
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Brake Pedal You must be getting ready to receive what we got last night, There is about 8" in the driveway. I looked at it and decided to have another coffee before I tackle it. I think Im ready now though. ;) __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

03-06-2011, 10:34 AM	#14
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Brake Pedal Steve, be sure you keep your hands and feet out of the way. Oh wait, you said coffee. Anyway take care. __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Pedal Cover	usranger74	1500 & 1600 Nomad	14	03-16-2011 06:18 PM
Brake pedal	csduncansnomad	Vulcan Nomad/Vaquero/Voyager	17	08-08-2010 11:51 PM
Brake Pedal	sharps45100	Vulcan Nomad/Vaquero/Voyager	9	03-26-2010 07:19 AM
brake pedal	rickyboy	Vulcan Nomad/Vaquero/Voyager	10	03-20-2010 12:58 AM
Brake Pedal too low	riding2up	1500 & 1600 Nomad	2	08-09-2009 06:11 AM