Fan switch install

fatrat45 · 08-17-2010, 09:03 AM

ya its me again 2006 1600 nomad, going to try a fan switch install. looked at all the tips from all post I think please wish me well in my endeavor. May have a urgent call to help, thanks a lot for all your help so far. ;)

dogdoc · 08-17-2010, 01:38 PM

My fan quit once then when I took it in they said see its working which it sure was then. been ok since. Good Luck.

**ringadingh** · 08-17-2010, 04:43 PM

I think that switch screws in the bottom of the rad if Im not mistaken, it shouldn't take more than a few minutes to change.
When your removing the old switch have the new one ready at hand, then you can quickly undo the old switch and install the new one and hopefully only lose a couple spoonfulls of antifreeze. This will save you draining the entire system and removing the fuel tank to refill the coolant. Unless of course you were planning on doing a coolant change.

macmac · 08-18-2010, 01:44 PM

Thats the fast and dirty method I guess. LOL

08-17-2010, 09:03 AM	#1
fatrat45 Member Join Date: Jun 2008 Location: Tuscaloosa Alabama Posts: 341	Fan switch install ya its me again 2006 1600 nomad, going to try a fan switch install. looked at all the tips from all post I think please wish me well in my endeavor. May have a urgent call to help, thanks a lot for all your help so far. ;) __________________ Randy (fatrat) May Tuscaloosa, Al. Back Road Riders MC. VBA # 290 2006 Black Nomad Login or Register to Remove Ads
	0

08-17-2010, 01:38 PM	#2
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	Fan switch install My fan quit once then when I took it in they said see its working which it sure was then. been ok since. Good Luck.
	0

08-17-2010, 04:43 PM	#3
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Fan switch install I think that switch screws in the bottom of the rad if Im not mistaken, it shouldn't take more than a few minutes to change. When your removing the old switch have the new one ready at hand, then you can quickly undo the old switch and install the new one and hopefully only lose a couple spoonfulls of antifreeze. This will save you draining the entire system and removing the fuel tank to refill the coolant. Unless of course you were planning on doing a coolant change. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

08-18-2010, 01:44 PM	#4
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Fan switch install Thats the fast and dirty method I guess. LOL __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fan not running	yoda	1500 & 1600 Nomad	41	07-31-2011 04:33 PM
fan switch install	fatrat45	1500 & 1600 Nomad	4	08-25-2010 09:38 AM
silicone sealant on fan switch install	fatrat45	1500 & 1600 Nomad	3	08-20-2010 07:30 PM
fan switch install	fatrat45	1500 & 1600 Nomad	5	08-12-2010 09:01 AM
rad fan!	cndfireman	1500 & 1600 Nomad	13	06-16-2009 06:57 AM