cam chain tensioners?????

[flash105]

Ok getting ready to get rid of as much racket as possible....]]
How many cam chain tensioners are on my 04, all I can find is 1????

[redjay]

There should be 2, one for each cylinder I think. One at the front of the engine and one at the back. Have you checked Gadgets website for cam chain adjuster extension replacement instructions ?

[vulcanero03]

rear right of the rear jug and rear left on the front jug, do read gadgets instructions, they have a load of valuable information.

[chuckster131]

There is one per cycl. Rear of front jug and rear of the rear one.
Go here http://www.gadgetjq.com/cc_tensioner.htm

Originally Posted by Flash

Ok getting ready to get rid of as much racket as possible....]]
How many cam chain tensioners are on my 04, all I can find is 1????

[crapper]

let me know how you get along.
i too will have to put on extenders on the cam chain adjusters cause i've got quite a racket in there

[ringadingh]

Its not hard to install them at all, reading on how to do it on gadgets sight was very detailed and took almost as long to read as doing the job.

[mac]

Just did mine this weekend. There was oil in the cap of my rear one, which I didn't expect. It was a little awkward getting around the exhaust pipe. Since I have a Thunder air kit, I just had to remove the horn covering the left side and the front cylender went much quicker and easier. In fact, the old end came off much easier at the end of the shaft too.

So I went slow on the first one as I was figuring out what I was doing (using Gadget's instructions) and the second went very quickly. Overall, an easy fix.