|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
01-06-2016, 04:11 PM | #1 |
Jr. Member
Join Date: Dec 2015
Location: Central Texas
Posts: 11
|
Does anyone use the kuryakyn cruise mounts for floorboards?
I am looking to put some cruise pegs on my vaquero and the floorboard mounts seem to be my answer. Was hoping for input on these and maybe some pics of how the look on the bike.
I do have the high way bar option . Any advice either way is appreciated. Login or Register to Remove Ads |
|
01-06-2016, 04:36 PM | #2 |
Sr. Member
Join Date: Nov 2014
Location: Ballwin,MO.
Posts: 1,542
|
I do know some members use the Kuryakyn highway pegs that mount to the floorboard, but I don't remember if any of them use them on a Vaquero. For sure on the nomads and they have always stated they like them.
__________________
|
|
01-06-2016, 04:41 PM | #3 |
Sr. Member
Join Date: Nov 2014
Location: Ballwin,MO.
Posts: 1,542
|
They do mention that these mounts are for the Vaquero as well.
https://www.twocycleguys.com/showPro...FcIjgQod0OMAXw
__________________
|
|
01-06-2016, 07:09 PM | #4 |
Jr. Member
Join Date: Dec 2015
Location: Central Texas
Posts: 11
|
Does anyone use the kuryakyn cruise mounts for floorboards?
Yes , I was hoping that someone has put them on there vaquero or even the voyager.
One of my concerns is that it will take a bit of lean clearance away . |
|
01-06-2016, 10:06 PM | #5 |
Advanced Member
Join Date: Jul 2011
Location: VA
Posts: 566
|
I use and love the Kury Tour Tech mounts on the crash bar . . . Very comfy for those times when you just want to stretch out . . .
__________________
2011 Voyager ABS Thunder Air Kit Power Pro Cobra Tri-Ovals Wrapped Header Pipes Heat Deflectors (from ebay) CB/Rear Speakers Avon grips with Throttle Magic by RACNRAY Shiny Chrome stuff Michelin Commander IIs Kury T/S Mirrors Sagebrush Design tank bib w/pouch Russell Day Long Seat w/Backrest Lots of Miles and Many More Smiles! Blue Knights - Virginia II Ride With Pride Login or Register to Remove Ads |
|
01-07-2016, 03:32 AM | #6 |
Jr. Member
Join Date: Jul 2015
Posts: 16
|
I had them on a v star that didnt have crash bars when i got it. They did not really let me stretch my legs out much. More just change position. I took them off after i got bars. But then again different bike.
|
|
01-07-2016, 10:50 AM | #7 |
Advanced Member
Join Date: Dec 2009
Location: Cleveland Ohio
Posts: 714
|
+1 to the above message, they are ok but don't let you stretch out. That is a common comment on those kind of footpegs. I would go with the Longhorn Offset Highway Pegs on the crash bars which is what I did on my Voyager. Same setup on the flooboards and crash bar I would assume.
|
|
01-07-2016, 09:27 PM | #8 |
Member
Join Date: Aug 2011
Location: N Las Vegas, NV
Posts: 364
|
I tried them on my Voyager and did not like them. 1. I have long legs and my toes caught on the mounts when I went to put my feet down causing some scary stops. 2. When I got them adjusted where I liked them they did scrape on curves. I took them off and sold them on Ebay and put pegs on the engine guard/crash bar. No trouble reaching them on the crash bar.
__________________
2010 Vulcan Voyager
Last edited by highwayman2011; 01-07-2016 at 09:29 PM.
|
|
01-07-2016, 10:12 PM | #9 |
Advanced Member
Join Date: Sep 2015
Posts: 542
|
I just put them on my Voyager but I have a Mustang seat (seats you further back) and am 5'8 and could barely reach them so I ordered 4" extensions and haven't mount them yet. With the 4" they will be higher and give more clearance cornering IMO. I will say the floorboards flex if I put too much pressure on them (understandable).
Even with the longhorns I was sitting too far back to reach the pegs comfortably and ordered the Kuryakyn 4526 Tour Tech Long Arm Cruise Peg Mount and will see how that works as I think I will get the reach I need on the highway bars. |
|
01-12-2016, 10:34 AM | #10 |
Jr. Member
Join Date: Dec 2015
Location: Central Texas
Posts: 11
|
Thanks for the input. I went with the kury offsets for crash bar . Really improved the ride at cruising speeds.
|
|
01-12-2016, 12:13 PM | #11 |
Member
Join Date: Jan 2011
Location: kentville Nova Scotia Canada
Posts: 290
|
I got a set from aeromach which mount on the floorboards on my 1700 Nomad. They work fine for me. However I am only 5'9".
__________________
Keep your head up and your stick on the ice. |
|
03-12-2016, 10:37 AM | #12 |
Jr. Member
Join Date: Jul 2015
Posts: 26
|
I put them on my VN2000, and after a cross Canada trip, I can say I love them!
|
|