Oil Filler Cap??

jasonc32amg · 01-08-2011, 05:43 PM

How the heck do I get this thing off? I don't have any hardcore flat blades, I guess I need to run to Sears real quick. Is there a special tool for this? If there is it should be in the darn tool kit.

jasperboy · 01-08-2011, 05:53 PM

Many just use a large washer and some vise grips.

**ringadingh** · 01-08-2011, 06:24 PM

And don't tighten it much when you replace it, the same goes especially true for the oil filters. Just barely hand tight is enough. They seem to tighten themselves pretty good over time.

usranger74 · 01-08-2011, 06:55 PM

Quote:

Originally Posted by jasonc32amg

How the heck do I get this thing off? I don't have any hardcore flat blades, I guess I need to run to Sears real quick. Is there a special tool for this? If there is it should be in the darn tool kit.

Chuckster makes a tool for it.

**minst7877** · 01-08-2011, 06:59 PM

A quarter and a adjustable wrench work well.

DC

jasonc32amg · 01-08-2011, 07:14 PM

Thanks, I tried a quarter and washers and they all would bend...picked up on of the big flat blades from Sears and that knocked it out.

cactusjack · 01-08-2011, 08:24 PM

Quote:

Originally Posted by usranger74

Quote:

Originally Posted by jasonc32amg

How the heck do I get this thing off? I don't have any hardcore flat blades, I guess I need to run to Sears real quick. Is there a special tool for this? If there is it should be in the darn tool kit.

Chuckster makes a tool for it.

Chuckster makes a tool that is machined to fit the slot so it doesn't damage the filler cap.

AlabamaNomadRider · 01-08-2011, 09:21 PM

I keep a silver dollar handy and it work just great. Don't over tighten and like Ring says especially don't over tighten the oil filter. It will be a pain to try to get off the next time.

fish · 01-08-2011, 09:31 PM

my rubber O-ring under the cap and the cap are boggered-up. I wonder what the stealer would charge for a new cap.

cactusjack · 01-08-2011, 10:22 PM

Quote:

Originally Posted by fish

my rubber O-ring under the cap and the cap are boggered-up. I wonder what the stealer would charge for a new cap.

Probably more than you'd care to pay for one.

**BudMan** · 01-08-2011, 10:27 PM

Quote:

Originally Posted by cactusjack

Quote:

Originally Posted by fish

my rubber O-ring under the cap and the cap are boggered-up. I wonder what the stealer would charge for a new cap.

Probably more than you'd care to pay for one.

That's a safe bet. :)

VulcanE · 01-08-2011, 10:36 PM

The one I have is from Cobra, but it looks just like this one, and this one has a good price.

CLICH HERE

And here's a whole page of different styles/colors

Click Here

hammer · 01-09-2011, 01:45 AM

Special tool #whatever. Find a big fender washer that fits right. Get a longish bolt and 2 nuts. Sandwich the washer between the nuts on the end of the bolt. Works perfect. Get an extra washer for your tool kit. A screw driver through the hole in the washer works well too.

fish · 01-09-2011, 07:52 AM

Quote:

Originally Posted by VulcanE

The one I have is from Cobra, but it looks just like this one, and this one has a good price.

CLICH HERE

And here's a whole page of different styles/colors

Click Here

jasonc32amg · 01-09-2011, 09:06 AM

Quote:

Originally Posted by VulcanE

The one I have is from Cobra, but it looks just like this one, and this one has a good price.

CLICH HERE

And here's a whole page of different styles/colors

Click Here

Nice indeed.

Figures I just come across an article talking about how royal purple is among the worst of the synthetics for bikes. I guess I'll be switching it out in 1,000 miles. :-/

01-08-2011, 05:43 PM	#1
jasonc32amg Member Join Date: Dec 2010 Location: Vero Beach, FL Posts: 105	Oil Filler Cap?? How the heck do I get this thing off? I don't have any hardcore flat blades, I guess I need to run to Sears real quick. Is there a special tool for this? If there is it should be in the darn tool kit. Login or Register to Remove Ads
	0

01-08-2011, 05:53 PM	#2
jasperboy Sr. Member Join Date: Jan 2009 Location: Wadsworth, OH Posts: 1,238	Oil Filler Cap?? Many just use a large washer and some vise grips. __________________ Current Bike - 2011 Victory Vision Tour Previous Bike: 2006 Nomad Original Nomad: 1999 G/G Nomad VBA #931R VROC #16379R
	0

01-08-2011, 06:24 PM	#3
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Oil Filler Cap?? And don't tighten it much when you replace it, the same goes especially true for the oil filters. Just barely hand tight is enough. They seem to tighten themselves pretty good over time. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

01-08-2011, 06:59 PM	#5
minst7877 Join Date: Oct 2010 Location: Michigan Posts: 1,286	Oil Filler Cap?? A quarter and a adjustable wrench work well. DC __________________ Me and my 99 G1 Nomad on US 2 by the Lake Michigan Shoreline. Judge's Oil Gear failed and engine overhauled @ 35563 miles VBA/KawaNOW #01625 Christian Motorcyclists Assoc. Wheels Of Destiny Chapter #735 PA Wilds NE/Eastern Canada regional rally July 2012 Eureka Springs National 2015 Rolling Thunder Washington DC 2016 NE US / E Canada Rally - Mont Tremblant, QC 2016 VRA Eastern National at Maggie Valley 2017 99 Nomad G1 gone but never forgotten traded 4/8/17 for a 2017 Indian Roadmaster Login or Register to Remove Ads
	0

01-08-2011, 07:14 PM	#6
jasonc32amg Member Join Date: Dec 2010 Location: Vero Beach, FL Posts: 105	Oil Filler Cap?? Thanks, I tried a quarter and washers and they all would bend...picked up on of the big flat blades from Sears and that knocked it out.
	0

01-08-2011, 09:21 PM	#8
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Oil Filler Cap?? I keep a silver dollar handy and it work just great. Don't over tighten and like Ring says especially don't over tighten the oil filter. It will be a pain to try to get off the next time. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

01-08-2011, 09:31 PM	#9
fish Top Contributor Join Date: Dec 2007 Location: Aquashicola Pa. Posts: 6,377	Oil Filler Cap?? my rubber O-ring under the cap and the cap are boggered-up. I wonder what the stealer would charge for a new cap. __________________ I'm not prejudice I hate everyone equally;) 08 nomad blue/silver MaryJane 74,010miles VBA #299 Her's 10 900LT 36,700 09 Bath NY. 10 Lake George NY. 11 National Maggie Valley NC. 12 Pa Wilds (Wellsboro) Pa. 14 Lincoln NH. 17 National Lake George NY.
	0

01-08-2011, 10:36 PM	#12
VulcanE Sr. Member Join Date: Jan 2008 Location: Cartersville, Georgia Posts: 4,838	Oil Filler Cap?? The one I have is from Cobra, but it looks just like this one, and this one has a good price. CLICH HERE And here's a whole page of different styles/colors Click Here __________________ Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381
	0

01-09-2011, 01:45 AM	#13
hammer Sr. Member Join Date: Feb 2009 Posts: 1,329	Oil Filler Cap?? Special tool #whatever. Find a big fender washer that fits right. Get a longish bolt and 2 nuts. Sandwich the washer between the nuts on the end of the bolt. Works perfect. Get an extra washer for your tool kit. A screw driver through the hole in the washer works well too. __________________ Hammer aka CrocHammer KawaNow#00988, VROC#26389, VR#2202 Abbotsford, BC, Canada 2006 Black Nomad
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Filler Cap	bearbait	1500 & 1600 Nomad	10	05-15-2011 01:19 PM
Help! Can't remove the oil cap.	chmorro	1500 & 1600 Nomad	35	08-05-2010 08:40 AM
Oil cap Tool	usranger74	Vulcan Nomad/Vaquero/Voyager	15	07-31-2010 09:31 PM
Oil Filler Plug	jodale	Vulcan Nomad/Vaquero/Voyager	17	05-17-2010 05:56 PM
Oil/Differental Cap Tool	radco	Vulcan Nomad/Vaquero/Voyager	15	07-01-2008 09:25 AM