Cam chain extenders....

**trip** · 03-24-2009, 06:55 AM

I know we've discussed this probably a million times....but, I'm getting close to 40,000 miles on my Nomad and even though I've had my cam chains checked out by my local dealer, I feel I'm getting close to needing cam chain extenders.

I've got alot of miles to put on my Nomad this year and I'd like to have some peace of mind that I'm not going to get stuck somewhere with holes in my tubes.

To be honest, I don't trust myself to put extenders in right, so I was thinking about paying the dealer to do it.

What does the brain trust think?

blowndodge · 03-24-2009, 08:32 AM

I've never done it but I've read the instructions and it looks pretty simple. Gadgets fix it page shows how and also how much of the post exposed below the caps that takes up the adjustment via spring pressure. If it hasn't sunk down below a certain point it's supposed to be fine. The chain flops around AFTER the spring loaded adjuster is on the end of its travel not before so if you have adjustment left then you don't need the extenders yet.

Check Gadget's site.. The site it will explain how to look for this.

**trip** · 03-24-2009, 08:42 AM

Will do BD...thanks.

mcdaddy · 03-24-2009, 09:53 AM

Trip, some dealers may not install the extenders, being as they are not Kaw parts. You may have to find an independent. Jefe had it done to his Drifter at an independent shop. You might quiz him on cost.

Then there also some VROC'ers experienced with it that may be willing to assist you.

waterman · 03-24-2009, 10:12 AM

Hey,

I see a demo at Custer???

**voyager** · 03-24-2009, 11:52 AM

Trip.

Re and Re of the extenders is a piece of cake. Really easy if you have a modified air intake and have removed the plastic cross over section. The extenders are a simple mechanical, ratcheting device that uses spring tension to keep the extender against the chain guide. Making sure you have removed all of the original gasket material is important, as well as not touching the starter, or rolling the bike in gear when you have any of the extenders out. I know this is a stupid sounding statement but it needs to be stressed. Now that Kawi makes the extenders you don't have to install the extra length buttons onto your originals, so real easy now.

voyager

Yellow Jacket · 03-24-2009, 02:48 PM

Quote:

Originally Posted by voyager

. . . Now that Kawi makes the extenders you don't have to install the extra length buttons onto your originals, so real easy now.

voyager

That's good news! Would you happen to have a part number?

waterman · 03-24-2009, 02:55 PM

Quote:

Originally Posted by voyager

Trip.

Re and Re of the extenders is a piece of cake. Really easy if you have a modified air intake and have removed the plastic cross over section. The extenders are a simple mechanical, ratcheting device that uses spring tension to keep the extender against the chain guide. Making sure you have removed all of the original gasket material is important, as well as not touching the starter, or rolling the bike in gear when you have any of the extenders out. I know this is a stupid sounding statement but it needs to be stressed. Now that Kawi makes the extenders you don't have to install the extra length buttons onto your originals, so real easy now.

voyager

Voyager,

Only one problem, I think that they are only sold in Canada. There are a couple of people in the States that have manufactured a modification that you can buy from them to extend the extenders.

01nomad · 03-24-2009, 03:46 PM

I haven't heard of anyone needing the extenders on a 1600. Might be not enough people have enough miles on them yet, but my 1500 needed them somewhere right after 22,000 miles. If you don't go wide open throttle much, you might not stretch them. Like voyager said, without the crossover pipe, it's not too hard of a job. Half a day best. Might need a big vise or press tho.

lw · 03-24-2009, 04:41 PM

Quote:

Originally Posted by waterman

Hey,I see a demo at Custer???

I'd be interested in that one

gv550 · 03-24-2009, 05:40 PM

I installed the tensioner extenders on my 1600 Nomad at 30,000 miles and with 135k on it now the chains are still nowhere near touching the tubes. The part number for the extenders is 92027-1500-DE. Available from any Kaw dealer in Canada for about 7 bucks.

Garry

**ringadingh** · 03-24-2009, 07:43 PM

I bought my extenders at the dealer here also, I'll be installing them before to long. It doesn't look like that hard of a job at all. The front cylinder tensioner is a little harder to get at but still obtainable.

audiogooroo · 03-24-2009, 10:45 PM

I did mine at 30,000 miles. It's a piece of cake Trip, go for it. Took me about an hour to do both. If you still have the crossover tube on the intake, the front jug is a bit of a wrestling act to get to the bolts, but it is do-able. The rear jug is too easy, probably take all of 5 minutes, less the time it takes for the red Loc-Tite to set.

dirtysteve · 03-26-2009, 01:46 PM

Where did you guys get your parts? I'm in NY. Don't know any Canadian dealers.

I've got an '06 with 35,000 miles on the clock. Have not checked the extensioners yet.

Steve

audiogooroo · 03-26-2009, 01:52 PM

I got mine from Snake (Tim Acree). Sadly, he passed away two years ago.

03-24-2009, 06:55 AM	#1
trip VBA Founder Join Date: Jun 2007 Location: Lindale, Texas Posts: 6,846	Cam chain extenders.... I know we've discussed this probably a million times....but, I'm getting close to 40,000 miles on my Nomad and even though I've had my cam chains checked out by my local dealer, I feel I'm getting close to needing cam chain extenders. I've got alot of miles to put on my Nomad this year and I'd like to have some peace of mind that I'm not going to get stuck somewhere with holes in my tubes. To be honest, I don't trust myself to put extenders in right, so I was thinking about paying the dealer to do it. What does the brain trust think? __________________ Robert "Trip" Hilliard VBA/KawaNOW - Founder/Past President VBA # 00001 Trip's Website Custer 09, 18 / Maggie Valley 11 / Eureka Springs 09, 17 / Antlers 09, 10, 11, 13, 15, 16, 17, 18 Texas Hill Country / Deals Gap / Colorado / Wyoming / Montana / Utah / More trips for Trip Login or Register to Remove Ads
	0

03-24-2009, 08:32 AM	#2
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	Cam chain extenders.... I've never done it but I've read the instructions and it looks pretty simple. Gadgets fix it page shows how and also how much of the post exposed below the caps that takes up the adjustment via spring pressure. If it hasn't sunk down below a certain point it's supposed to be fine. The chain flops around AFTER the spring loaded adjuster is on the end of its travel not before so if you have adjustment left then you don't need the extenders yet. Check Gadget's site.. The site it will explain how to look for this. __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

03-24-2009, 08:42 AM	#3
trip VBA Founder Join Date: Jun 2007 Location: Lindale, Texas Posts: 6,846	Cam chain extenders.... Will do BD...thanks. __________________ Robert "Trip" Hilliard VBA/KawaNOW - Founder/Past President VBA # 00001 Trip's Website Custer 09, 18 / Maggie Valley 11 / Eureka Springs 09, 17 / Antlers 09, 10, 11, 13, 15, 16, 17, 18 Texas Hill Country / Deals Gap / Colorado / Wyoming / Montana / Utah / More trips for Trip
	0

03-24-2009, 09:53 AM	#4
mcdaddy Member Join Date: Feb 2008 Location: Hutto, Tx Posts: 156	Cam chain extenders.... Trip, some dealers may not install the extenders, being as they are not Kaw parts. You may have to find an independent. Jefe had it done to his Drifter at an independent shop. You might quiz him on cost. Then there also some VROC'ers experienced with it that may be willing to assist you.
	0

03-24-2009, 10:12 AM	#5
waterman Top Contributor Join Date: Oct 2007 Location: Colorado Posts: 6,530	Cam chain extenders.... Hey, I see a demo at Custer??? __________________ Joel "Waterman" 2017 HD Road Glide Ultra 2006 Nomad - Sold VBA 213 VROC 16913 Custer 09: Cortez 10: Crescent City 11: Kanab 12: Estes Park 13: Tahoe 14: Red Lodge 16 Login or Register to Remove Ads
	0

03-24-2009, 11:52 AM	#6
voyager Join Date: Sep 2007 Location: Stony Plain, Alberta Posts: 694	Cam chain extenders.... Trip. Re and Re of the extenders is a piece of cake. Really easy if you have a modified air intake and have removed the plastic cross over section. The extenders are a simple mechanical, ratcheting device that uses spring tension to keep the extender against the chain guide. Making sure you have removed all of the original gasket material is important, as well as not touching the starter, or rolling the bike in gear when you have any of the extenders out. I know this is a stupid sounding statement but it needs to be stressed. Now that Kawi makes the extenders you don't have to install the extra length buttons onto your originals, so real easy now. voyager __________________ Travel is fatal to prejudice, bigotry, and narrow-mindedness, and many of our people need it sorely on these accounts.........Mark Twain.
	0

03-24-2009, 03:46 PM	#9
01nomad Member Join Date: Dec 2007 Location: Clinton, Iowa Posts: 192	Cam chain extenders.... I haven't heard of anyone needing the extenders on a 1600. Might be not enough people have enough miles on them yet, but my 1500 needed them somewhere right after 22,000 miles. If you don't go wide open throttle much, you might not stretch them. Like voyager said, without the crossover pipe, it's not too hard of a job. Half a day best. Might need a big vise or press tho.
	0

03-24-2009, 05:40 PM	#11
gv550 Advanced Member Join Date: Jan 2009 Location: Listowel, Ontario Posts: 644	Cam chain extenders.... I installed the tensioner extenders on my 1600 Nomad at 30,000 miles and with 135k on it now the chains are still nowhere near touching the tubes. The part number for the extenders is 92027-1500-DE. Available from any Kaw dealer in Canada for about 7 bucks. Garry __________________ Garry 2009 1700 Voyager KACT, sold at 679,465 kms 2011 1700 Nomad Improve handling, suspension and tire life with Garry's Fork Brace. PM for details.
	0

03-24-2009, 07:43 PM	#12
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Cam chain extenders.... I bought my extenders at the dealer here also, I'll be installing them before to long. It doesn't look like that hard of a job at all. The front cylinder tensioner is a little harder to get at but still obtainable. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

03-24-2009, 10:45 PM	#13
audiogooroo Sr. Member Join Date: Oct 2007 Location: Colorado Springs, Colorado/Las Vegas, NV Posts: 3,390	Cam chain extenders.... I did mine at 30,000 miles. It's a piece of cake Trip, go for it. Took me about an hour to do both. If you still have the crossover tube on the intake, the front jug is a bit of a wrestling act to get to the bolts, but it is do-able. The rear jug is too easy, probably take all of 5 minutes, less the time it takes for the red Loc-Tite to set. __________________ Audiogooroo - Daryl Porter Colorado Springs, CO VBA #248 VROC #17261 1999 Grn/Grn Nomad
	0

03-26-2009, 01:46 PM	#14
dirtysteve Jr. Member Join Date: Jul 2007 Location: NY Posts: 47	Cam chain extenders.... Where did you guys get your parts? I'm in NY. Don't know any Canadian dealers. I've got an '06 with 35,000 miles on the clock. Have not checked the extensioners yet. Steve
	0

03-26-2009, 01:52 PM	#15
audiogooroo Sr. Member Join Date: Oct 2007 Location: Colorado Springs, Colorado/Las Vegas, NV Posts: 3,390	Cam chain extenders.... I got mine from Snake (Tim Acree). Sadly, he passed away two years ago. __________________ Audiogooroo - Daryl Porter Colorado Springs, CO VBA #248 VROC #17261 1999 Grn/Grn Nomad
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cam Chain Extenders Done!	coacha	1500 & 1600 Nomad	8	03-01-2011 12:47 PM
Cam chain extenders	cocheese72	Vulcan Nomad/Vaquero/Voyager	27	02-27-2011 11:21 PM
Cam Chain Extenders	sonny	1500 & 1600 Nomad	9	01-13-2010 09:10 PM
One or two cam chain extenders????	spirello	1500 & 1600 Nomad	9	05-22-2009 07:40 PM
Cam chain extenders	cyclecat	Vulcan Nomad/Vaquero/Voyager	0	04-30-2009 09:56 PM