Clutch parts...part 2

bucfan11 · 10-27-2009, 03:39 PM

I received my spring today...It IS the same as a 08 Mean Streak. They both are .065". My old spring looks almost new, there are rub marks but not any measurable wear on the tips. I'll wait on the Barnett spring to arrive. I measured all the steel and friction plates, they are all well within spec. The steel plates are discolored from heat. They are not warped. The last steel plate is the "adjustment plate which comes in 3 sizes: 1.6, 2.0 or 2.3mm. My plate is the 1.6mm plate. Do I need to replace everything because of the discolor or can I buy a 2.0~2.3 adjustment plate to "tighten" up the clutch.

Rob

macmac · 10-30-2009, 10:11 AM

Hard to say with out seeing.. I would try that Barnett Spring with nothing else first.

What you can't see is what is wrong... The temper is lost in the spring.

**ringadingh** · 10-30-2009, 08:45 PM

I agree with Mac, I think the new spring will get you back up and running on its own.

10-27-2009, 03:39 PM	#1
bucfan11 Jr. Member Join Date: Oct 2008 Location: Lakeland, Florida Posts: 48	Clutch parts...part 2 I received my spring today...It IS the same as a 08 Mean Streak. They both are .065". My old spring looks almost new, there are rub marks but not any measurable wear on the tips. I'll wait on the Barnett spring to arrive. I measured all the steel and friction plates, they are all well within spec. The steel plates are discolored from heat. They are not warped. The last steel plate is the "adjustment plate which comes in 3 sizes: 1.6, 2.0 or 2.3mm. My plate is the 1.6mm plate. Do I need to replace everything because of the discolor or can I buy a 2.0~2.3 adjustment plate to "tighten" up the clutch. Rob Login or Register to Remove Ads
	0

10-30-2009, 10:11 AM	#2
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Clutch parts...part 2 Hard to say with out seeing.. I would try that Barnett Spring with nothing else first. What you can't see is what is wrong... The temper is lost in the spring. __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

10-30-2009, 08:45 PM	#3
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Clutch parts...part 2 I agree with Mac, I think the new spring will get you back up and running on its own. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch push rod seal part number	Cajunrider	1500 & 1600 Nomad	21	06-19-2011 06:44 PM
Anyone Need a Part?	wrongway	NorthWest Group	4	05-03-2011 10:32 PM
Clutch Spring and Clutch Replacement by Pete	Cajunrider	Mechanical	0	04-17-2011 08:49 PM
clutch parts	moonshine1956	1500 & 1600 Nomad	10	01-13-2011 10:36 PM
Parts for a 2007 Nomad for sale Part II	mikesth	Parts & Accessories	7	08-15-2009 01:46 AM