|
|
07-24-2013, 09:35 PM
|
#1 |
|
Jr. Member
Join Date: Jun 2013
Location: Tidewater (SE) area of Virginia
Posts: 16
|
Handlebar risers again
Found some forged alluminium 4" handlebar risers in Drag Specialties catalog for around 70 bucks with a thread size of 1/2 X 13. Is there anything that needs to be done to the stock triple tree (07 Nomad) to make these work. Hoping to not have to change cables and hoses. I have not looked at the stock mounting system to see if it is studs or bolts being used. This would be a much cheaper alternative to spending $130 for ones from other vendors.
 Thanks in advance to all replies. Login or Register to Remove Ads |
|
|
07-24-2013, 10:16 PM
|
#2 |
|
Sr. Member
Join Date: Jan 2012
Location: St. Pauls, NC
Posts: 2,089
|
They should work. If anything, you may have to re-route the cables from under the triple tree.
__________________
Robert Torrey VBA# 02077 Vroc# 27672 1996 800A Customized (SOLD) 2001 1500 Nomad (The Mistress) 2013 Voyager  2014 SE Rally - Elkins, WV 2016 SE Rally - Helen, Ga |
|
|
Linear Mode
