Cam chain extenders

kkruetzkamp · 12-30-2010, 07:27 PM

Can anyone explain to me exactly what these are? I have an 08 1600 and am wondering if it is just something that is done to improve performance or a maintaince thing. I have seen posts about the but am still confused as to what it/they are.

**Top Cat** · 12-30-2010, 07:37 PM

On the 1600 engine the cam chains seem to strech quicker than normal. The extenders are put on the end of your stock tensioner rods to take up the slack. You have two chouces. Extendrers or new chains. I had my extenders put in by the dealer at 45,000 miles and he said i still had a little ways to go.
It is definatly a maintence item.
If you are mechanicly inclined , which I am not , you can do it yourself.
Go to this link, scroll down to the bottom and there is a picture of the ones Chuckster sells. That's where I bought mine.
http://www.chucksterscustoms.com/Products

mikeyger · 12-30-2010, 07:50 PM

It is a maintenance thing. Go down on this site to where it says ENGINE and click on there and one member of our group has directions and pictures explaining and showing how to put them on if needed they did a good job! Also you can go to gadgets fix it page and under MAINTENANCE TIPS there is a section that shows how to install with pictures and better yet how you can check and see if you need them in about 15 min without having to reset them. If you decide you need them Chuckster (Joe ) sells them for 30 dollars.

**Cajunrider** · 12-30-2010, 07:56 PM

Quote:

Originally Posted by kkruetzkamp

Can anyone explain to me exactly what these are? I have an 08 1600 and am wondering if it is just something that is done to improve performance or a maintaince thing. I have seen posts about the but am still confused as to what it/they are.

How many miles on your '08?

delivery58 · 12-30-2010, 08:06 PM

Go to Gadgetjq.com, has step-by-step instructions with good pictures.

AlabamaNomadRider · 12-31-2010, 12:18 AM

It is something that will have to be accomplished or your chain will end up with too much slack. Eventually will cause damage plus being noisy.

kkruetzkamp · 12-31-2010, 01:14 AM

Cajunrider, I only have 12000 on mine. Which 5000 was put on it since I bough it used back in May. Thanks for all the tips. Is there a guess on the milage when this needs to be done and is there any directions for the tension rods or is this something that just wears out?

redjay · 12-31-2010, 08:04 AM

Mileage will vary. I would say between 25,000 to 40,000 miles is the norm for needing the extenders. The cam chain tensioner has a tip on it that wears. This tip is removed and a longer one put on. I have 60,000 kms on my 05 and I will be inspecting the cam chain tensioners in the Spring. I have had no issues with them yet that I am aware of.

cactusjack · 12-31-2010, 08:51 AM

I did mine at around 35,000 miles.

**Cajunrider** · 12-31-2010, 09:29 AM

I did mine at 25,000 and had a little travel left. I would inspect them after 20,000 miles. You should be good at 12,000.

**ringadingh** · 12-31-2010, 09:54 AM

Quote:

Originally Posted by kkruetzkamp

Cajunrider, I only have 12000 on mine. Which 5000 was put on it since I bough it used back in May. Thanks for all the tips. Is there a guess on the milage when this needs to be done and is there any directions for the tension rods or is this something that just wears out?

Gadgets Fixit has an excellent how to that shows you in detail everything that is involved in installing cam chain extenders.
Actually doing the job is even easier than reading about it.

AlabamaNomadRider · 12-31-2010, 12:47 PM

Steve that is good news. If installing them is easier than reading it I should do fine when it is time for me to do it.

**ringadingh** · 12-31-2010, 01:42 PM

Once youve done one side and figured it out, the second is usually a breeze.

**Top Cat** · 12-31-2010, 05:26 PM

It was alot easier than I thought it was going to be.
Took the bike to the dealer along with the extenders and just like that, the next day they were in.

macmac · 12-31-2010, 07:10 PM

I did Flavors bike at 32,000 miles I think. Jim will correct that if I am wrong. He has 3 teeth on the tenstioner on cly 1 and 2 teeth on cly 2 left to go. There is 19 teeth on the tenstioner, each 1/10th inch apart.

In part it depends on how agreesive a rider you are with that throttle. Someone who twists that wick hard ALL the time, will stretch the chains faster than a guy who is mostly more subltle.

12-30-2010, 07:27 PM	#1
kkruetzkamp Member Join Date: Oct 2010 Location: Northen Kentucky Posts: 91	Cam chain extenders Can anyone explain to me exactly what these are? I have an 08 1600 and am wondering if it is just something that is done to improve performance or a maintaince thing. I have seen posts about the but am still confused as to what it/they are. Login or Register to Remove Ads
	0

12-30-2010, 07:37 PM	#2
Top Cat Join Date: Jul 2007 Location: Peoples Republic of New York State Posts: 15,154	Cam chain extenders On the 1600 engine the cam chains seem to strech quicker than normal. The extenders are put on the end of your stock tensioner rods to take up the slack. You have two chouces. Extendrers or new chains. I had my extenders put in by the dealer at 45,000 miles and he said i still had a little ways to go. It is definatly a maintence item. If you are mechanicly inclined , which I am not , you can do it yourself. Go to this link, scroll down to the bottom and there is a picture of the ones Chuckster sells. That's where I bought mine. http://www.chucksterscustoms.com/Products __________________ Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4]
	0

12-30-2010, 07:50 PM	#3
mikeyger Member Join Date: Aug 2010 Location: hermitage tenn Posts: 410	Cam chain extenders It is a maintenance thing. Go down on this site to where it says ENGINE and click on there and one member of our group has directions and pictures explaining and showing how to put them on if needed they did a good job! Also you can go to gadgets fix it page and under MAINTENANCE TIPS there is a section that shows how to install with pictures and better yet how you can check and see if you need them in about 15 min without having to reset them. If you decide you need them Chuckster (Joe ) sells them for 30 dollars.
	0

12-30-2010, 08:06 PM	#5
delivery58 Member Join Date: Apr 2008 Location: North Idaho Posts: 400	Cam chain extenders Go to Gadgetjq.com, has step-by-step instructions with good pictures. __________________ Vinnie in North Idaho Login or Register to Remove Ads
	0

12-31-2010, 12:18 AM	#6
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Cam chain extenders It is something that will have to be accomplished or your chain will end up with too much slack. Eventually will cause damage plus being noisy. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

12-31-2010, 01:14 AM	#7
kkruetzkamp Member Join Date: Oct 2010 Location: Northen Kentucky Posts: 91	Cam chain extenders Cajunrider, I only have 12000 on mine. Which 5000 was put on it since I bough it used back in May. Thanks for all the tips. Is there a guess on the milage when this needs to be done and is there any directions for the tension rods or is this something that just wears out?
	0

12-31-2010, 08:04 AM	#8
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 7,017	Cam chain extenders Mileage will vary. I would say between 25,000 to 40,000 miles is the norm for needing the extenders. The cam chain tensioner has a tip on it that wears. This tip is removed and a longer one put on. I have 60,000 kms on my 05 and I will be inspecting the cam chain tensioners in the Spring. I have had no issues with them yet that I am aware of.
	0

12-31-2010, 08:51 AM	#9
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Cam chain extenders I did mine at around 35,000 miles. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

12-31-2010, 09:29 AM	#10
Cajunrider Join Date: Apr 2008 Location: (SE Louisiana) Posts: 8,340	Cam chain extenders I did mine at 25,000 and had a little travel left. I would inspect them after 20,000 miles. You should be good at 12,000. __________________ 2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482
	0

12-31-2010, 12:47 PM	#12
AlabamaNomadRider Sr. Contributor Join Date: Jul 2009 Location: Boaz, Alabama Posts: 13,742	Cam chain extenders Steve that is good news. If installing them is easier than reading it I should do fine when it is time for me to do it. __________________ Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181
	0

12-31-2010, 01:42 PM	#13
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Cam chain extenders Once youve done one side and figured it out, the second is usually a breeze. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

12-31-2010, 05:26 PM	#14
Top Cat Join Date: Jul 2007 Location: Peoples Republic of New York State Posts: 15,154	Cam chain extenders It was alot easier than I thought it was going to be. Took the bike to the dealer along with the extenders and just like that, the next day they were in. __________________ Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4]
	0

12-31-2010, 07:10 PM	#15
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Cam chain extenders I did Flavors bike at 32,000 miles I think. Jim will correct that if I am wrong. He has 3 teeth on the tenstioner on cly 1 and 2 teeth on cly 2 left to go. There is 19 teeth on the tenstioner, each 1/10th inch apart. In part it depends on how agreesive a rider you are with that throttle. Someone who twists that wick hard ALL the time, will stretch the chains faster than a guy who is mostly more subltle. __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cam Chain Extenders Done!	coacha	1500 & 1600 Nomad	8	03-01-2011 12:47 PM
Cam chain extenders	cocheese72	Vulcan Nomad/Vaquero/Voyager	27	02-27-2011 11:21 PM
Cam Chain Extenders	sonny	1500 & 1600 Nomad	9	01-13-2010 09:10 PM
One or two cam chain extenders????	spirello	1500 & 1600 Nomad	9	05-22-2009 07:40 PM
Cam chain extenders	cyclecat	Vulcan Nomad/Vaquero/Voyager	0	04-30-2009 09:56 PM