bending aluminum

towering · 12-13-2007, 05:50 PM

Im looking at building a bracket to house all my stuff gps. cell phone, mp3. My question is can ya bend aluminum 90 degrees

dantama · 12-13-2007, 07:57 PM

The aluminum key that came with my Venture trunk this week was bent 90 degrees, no problem during transit.
The problem was going back straight. Of course like bent levers, it broke trying to go back straight.

blowndodge · 12-13-2007, 08:13 PM

depends on how it was made. Cast or injected aluminum will break. Solid aluminum will bend. Property is close to steel in that regard. Cast is when you break a piece of aluminum and see tons of microscopic bubbles inside. Almost all made for retail aluminum parts are not solid unfortunately which sounds like it won't work for your application unless you have a source for solid aluminum.

bobzinger · 12-14-2007, 01:48 PM

This is a Cig Lighter bracket made from .090 sheet T6061 aluminum. It bent very easy on a brake. I've heard that by flash heating aluminum with a torch you can bent it even easier.

towering · 12-14-2007, 02:17 PM

Thanks guys. Im looking at getting some at Lowes or Home Depot. Is the stuff there ok to bend.

naugaman · 12-14-2007, 03:24 PM

I have bent the sheets or what ever you buy at Lowes or Home Depot. Not a problem. Having been in the HVAC business, I have bent a lot of aluminum.

12-13-2007, 05:50 PM	#1
towering Member Join Date: Oct 2007 Location: Lexington S.C Posts: 366	bending aluminum Im looking at building a bracket to house all my stuff gps. cell phone, mp3. My question is can ya bend aluminum 90 degrees Login or Register to Remove Ads
	0

12-13-2007, 07:57 PM	#2
dantama Join Date: Dec 2007 Location: Denver, CO Posts: 0	bending aluminum The aluminum key that came with my Venture trunk this week was bent 90 degrees, no problem during transit. The problem was going back straight. Of course like bent levers, it broke trying to go back straight.
	0

12-13-2007, 08:13 PM	#3
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	bending aluminum depends on how it was made. Cast or injected aluminum will break. Solid aluminum will bend. Property is close to steel in that regard. Cast is when you break a piece of aluminum and see tons of microscopic bubbles inside. Almost all made for retail aluminum parts are not solid unfortunately which sounds like it won't work for your application unless you have a source for solid aluminum. __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

12-14-2007, 01:48 PM	#4
bobzinger Sr. Member Join Date: Sep 2007 Location: Livermore CA Posts: 1,334	bending aluminum This is a Cig Lighter bracket made from .090 sheet T6061 aluminum. It bent very easy on a brake. I've heard that by flash heating aluminum with a torch you can bent it even easier. __________________ Life is Good! Eternal Life is better!
	0

12-14-2007, 02:17 PM	#5
towering Member Join Date: Oct 2007 Location: Lexington S.C Posts: 366	bending aluminum Thanks guys. Im looking at getting some at Lowes or Home Depot. Is the stuff there ok to bend. Login or Register to Remove Ads
	0

12-14-2007, 03:24 PM	#6
naugaman Member Join Date: Jul 2007 Location: Vegas Posts: 280	bending aluminum I have bent the sheets or what ever you buy at Lowes or Home Depot. Not a problem. Having been in the HVAC business, I have bent a lot of aluminum.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bending Your Boner	rooster1	Lighter Side/Jokes	5	06-14-2011 07:50 PM
Metal Bending	Top Cat	Vulcan Nomad/Vaquero/Voyager	11	01-03-2011 12:57 PM
Aluminum trailer--NEW	butch	Parts & Accessories	6	04-17-2010 06:38 AM
Bending handlebars?	bobhamlin	1500 & 1600 Nomad	23	12-03-2009 10:09 PM
Aluminum trailer--NEW	bigsid1	Parts & Accessories	10	10-27-2009 09:59 PM