|
|
04-03-2017, 06:37 PM
|
#1 |
|
Jr. Member
Join Date: Mar 2017
Posts: 32
|
Air breather question
Hello new member.
I have a question, I own a 1999 Vulcan Nomad vn1500g My question is , Is it possible to run a single air filter other than the set up on stock bike ? With those dog bowel looking air box covers . Makes no sense carb is on the right, But yet filter is on left and passes between both cylinders before entering carb . Also has anyone done this? How did you do it , and what parts did you use ? Can a hypercharger work on this bike ? Basically I'm asking what I need ( part wise to only run one one filter on carb side of bike ) Any help is appreciated. 1999 Vulcan Nomad , Vance and Hines true duals for bagger Login or Register to Remove Ads |
|
|
04-03-2017, 06:53 PM
|
#2 |
 
Join Date: Mar 2014
Location: Placerville, CA
Posts: 2,946
|
Checkout Chucksters
http://chucksterscustoms.com/product...500-1600-1700/ He makes quality products.
__________________
Jim Diebolt 2015 Vulcan 1700 Voyager ABS The Black Kaw 2005 Vulcan Nomad Sold 2006 Honda 1800 VTX (Freebie) Sold 2008 Harley Ultra Classic Sold 2001 Harley Ultra Classic Sold Hangtown, Kalifornia  VBA #2625 |
|
|
|
04-03-2017, 07:42 PM
|
#3 |
|
Top Contributor
Join Date: Feb 2008
Location: Ontario
Posts: 6,927
|
|
|
|
|
04-04-2017, 06:21 AM
|
#4 |
|
Jr. Member
Join Date: Mar 2017
Posts: 32
|
Thank you
|
|
|
|
04-06-2017, 11:20 AM
|
#5 |
|
Advanced Member
Join Date: Jun 2014
Location: crooked river ranch oregon
Posts: 723
|
I had a 2002 Vulcan 1500P meanstreak and what you have to do is remove both bowls from each side, then cut the crossover tunnel going from the left side to the right side and plug it off. You can then purchase a Baron's tear drop intake and bolt it onto the right side for direct air flow and that one makes the absolute best power for that motor, and is slim and out of the way of your right leg, and easy to service when it comes time for a cleaning and oiling. When I got mine the kit also came with a complimentary pair of block off plates to put in place of the reed valves on both cylinders, having removed the entire smog system off. When you do this there is on little vacuum hose that will need a plug that goes from the smog plumbing into the throttle body. All of this will make the engine run smoother and better. Make sure those plates have a little permatex sealer when going on to prevent air leaks.
__________________
2012 Vaquero S.E. Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors. 
Login or Register to Remove Ads
Last edited by hlknvlcn60; 04-06-2017 at 11:22 AM.
|
|
|
|
04-06-2017, 11:22 AM
|
#6 |
|
Advanced Member
Join Date: Jun 2014
Location: crooked river ranch oregon
Posts: 723
|
2002 1500 Meanstreak
Here is the setup on my Meanstreak for the intake with the block off plates installed.
__________________
2012 Vaquero S.E. Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors.
|
|
|
Linear Mode
