Where have all the seat brackets gone

kevin · 10-12-2012, 12:19 PM

So I bought a mustang seat for my 2011 Vaquero so the wife would have a better seat. The mustang seat is great when she rides and on long trips. But for commuting and riding solo i like the stock seat. PROBLEM: The mustang requires the use of the stock seat's bracket to attach to the bike. I would like an extra one to put back one the stock seat to make replacing them with one another easy. I tried to oder a bracket from two dealers so far both said that the part is on backorder(I placed the order anyway I was in no real hurry to get it). That was 4 months ago and still no bracket. Tried online part stores NO LUCK there either. Most sites show it as unavailable and the ones that show it in there store don't have it when i call. So any help or advice would be great.

smokey · 10-12-2012, 12:59 PM

Did you try ebay, some guy was parting out a vn1700 not that long ago.

aldridgekennedy · 10-12-2012, 01:25 PM

I did the same thing with my gel touring seat. Wife likes it for 2 up riding. I prefer the stock seat for solo. Changing out the bracket everytime was a pain.

The olnly place i found the extra bracket was ordering it through the dealer. It is so infrequently requested there apparantly isn't a supply of them ready to ship out. It took me about 2 months or so, but the delaer got me one in. I'd say just hang in there and check in with your dealer from time to time to "remind" them.

Good luck. If i run across one though I'll let you know.

**jestephens** · 10-12-2012, 06:39 PM

I ordered mine through the dealer. I had to contact Kawasaki to get the part numbers for the bracket and the rubber bumpers that go on the bottom of the seat pan.

Total was about $70. I was a bit upset that it took an additional $70 to make the second seat usable (to swap back and forth).
I searched for the part numbers I had before making this post, but to no avail. I'll keep looking, and also think I've posted them here before too. ???

**jestephens** · 10-12-2012, 09:15 PM

After looking around for emails and such, I remembered Kawasaki actually replied to me by phone and I had written the part numbers on paper an taken that to the dealer. - in short, I have no remaining record of the part numbers. Sorry

bouson · 10-12-2012, 11:57 PM

Per Kawasaki website accessories parts diagram for the Vaqueros the Bracket is 11056-0951 the Damper is 92075-1927

**bearbait** · 10-15-2012, 08:29 AM

I got a seat bracket from this on-line source: http://www.partsdepotstore.com/pages.../I17I1715F2510

It was backordered and took probably two months to arrive, but it did come in.

Kawasakieric · 10-15-2012, 09:16 PM

Both the brackets and grommets are in stock as per Kawasaki dealer website.
I had 1 on back order for 6 weeks and got it last week.

kevin · 10-17-2012, 08:57 PM

Hey thanks to everyone who replied. Dealer called yesterday and told me my order just arived. Only took em about 4 months to get it.

10-12-2012, 12:19 PM	#1
kevin Jr. Member Join Date: Aug 2011 Location: Lynchburg VA Posts: 9	Where have all the seat brackets gone So I bought a mustang seat for my 2011 Vaquero so the wife would have a better seat. The mustang seat is great when she rides and on long trips. But for commuting and riding solo i like the stock seat. PROBLEM: The mustang requires the use of the stock seat's bracket to attach to the bike. I would like an extra one to put back one the stock seat to make replacing them with one another easy. I tried to oder a bracket from two dealers so far both said that the part is on backorder(I placed the order anyway I was in no real hurry to get it). That was 4 months ago and still no bracket. Tried online part stores NO LUCK there either. Most sites show it as unavailable and the ones that show it in there store don't have it when i call. So any help or advice would be great. Login or Register to Remove Ads
	0

10-12-2012, 12:59 PM	#2
smokey Sr. Member Join Date: Mar 2012 Location: Orleans, ON, Canada Posts: 1,162	Did you try ebay, some guy was parting out a vn1700 not that long ago. __________________ Smokey Capt(retd) Canadian Forces National President CVFR (Canadian Veteran Freedom Riders) 2010 VN1700 Voyager, ABS www.cvfr.ca VBA #02220
	0

10-12-2012, 06:39 PM	#4
jestephens Join Date: Jan 2009 Location: Fairview Heights, IL (StLouis) Posts: 1,601	I ordered mine through the dealer. I had to contact Kawasaki to get the part numbers for the bracket and the rubber bumpers that go on the bottom of the seat pan. Total was about $70. I was a bit upset that it took an additional $70 to make the second seat usable (to swap back and forth). I searched for the part numbers I had before making this post, but to no avail. I'll keep looking, and also think I've posted them here before too. ??? __________________ Jay Stephens, Former National Vice President (2013-2015) 2006 Yamaha FJR1300 formerly 2011 Vaquero- Black formerly 2005 Nomad - black/silver
	0

10-12-2012, 09:15 PM	#5
jestephens Join Date: Jan 2009 Location: Fairview Heights, IL (StLouis) Posts: 1,601	After looking around for emails and such, I remembered Kawasaki actually replied to me by phone and I had written the part numbers on paper an taken that to the dealer. - in short, I have no remaining record of the part numbers. Sorry __________________ Jay Stephens, Former National Vice President (2013-2015) 2006 Yamaha FJR1300 formerly 2011 Vaquero- Black formerly 2005 Nomad - black/silver Login or Register to Remove Ads
	0

10-12-2012, 11:57 PM	#6
bouson Member Join Date: May 2012 Location: Wichita, KS Posts: 227	Per Kawasaki website accessories parts diagram for the Vaqueros the Bracket is 11056-0951 the Damper is 92075-1927 __________________ My friends call me KC!! Wichita, KS VBA #02089 Previous Bikes: 75 Yamaha 175 09 Vulcan 900 Classic 11 Vulcan Vaquero *Harleys:* 75 Sportster XLCH 84 Sportster 1000 85 FXRT 79 Low Rider
	0

10-12-2012, 01:25 PM	#3
aldridgekennedy Member Join Date: Nov 2010 Location: Garner, NC Posts: 200	I did the same thing with my gel touring seat. Wife likes it for 2 up riding. I prefer the stock seat for solo. Changing out the bracket everytime was a pain. The olnly place i found the extra bracket was ordering it through the dealer. It is so infrequently requested there apparantly isn't a supply of them ready to ship out. It took me about 2 months or so, but the delaer got me one in. I'd say just hang in there and check in with your dealer from time to time to "remind" them. Good luck. If i run across one though I'll let you know.
	0

10-15-2012, 08:29 AM	#7
bearbait Join Date: Sep 2008 Location: Greene County, NY Posts: 143	I got a seat bracket from this on-line source: http://www.partsdepotstore.com/pages.../I17I1715F2510 It was backordered and took probably two months to arrive, but it did come in. __________________ VBA #00794 2011 Vaquero (Ebony) replaced 2008 Nomad 1600 (Blue/Silver)
	0

10-15-2012, 09:16 PM	#8
Kawasakieric Jr. Member Join Date: Aug 2012 Location: Harrisburg,Pa Posts: 24	Both the brackets and grommets are in stock as per Kawasaki dealer website. I had 1 on back order for 6 weeks and got it last week.
	0

10-17-2012, 08:57 PM	#9
kevin Jr. Member Join Date: Aug 2011 Location: Lynchburg VA Posts: 9	Hey thanks to everyone who replied. Dealer called yesterday and told me my order just arived. Only took em about 4 months to get it.
	0