|
04-08-2016, 07:14 PM | #16 | |
Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
Quote:
The stock level is the Kawi recommended level measured down from the top of the inner tube, fully compressed and without the spring: 182 mm ± 2 mm for VN1700A (subtract 2 mm if you have the ABS model). For a progressive kit, it is probably correct to not fill above 195 mm below the top as you get more compression from the progressives, I would think. You might blow a seal if you go higher than they recommend. Login or Register to Remove Ads |
|
|