Power Commander

rewindgy · 03-25-2008, 04:31 PM

New PC III in box - is the USB style $150 plus shipping ( should be cheap) OBO For 1600 Nomad - SOLD -

stangcrasher · 03-28-2008, 08:14 PM

Ever been installed on anything? Sounds like a great price and i'll be interested if i know for sure it is brand new and nothing wrong with it.

rewindgy · 03-29-2008, 07:04 PM

Brand new in the box - box was opened just to inspect as to that everything was there! Full story - had one installed by Dealer - the original never worked properly - found out Tech who installed it broke the connectors and water was shorting out the connectors - I pulled out the damaged unit and gave back to dealer - they supplied this new one and I never put it back in! When they gave me the new replacement I opened box to make sure that nothing was missing and that it was indeed a new unit!

Now there is a new Shop in town that has a Brand new Dyno from Dynojet and they are doing complete Dyno tuning for $350 but they won't give out a copy of the map. I'm not sure if I will go for it as since I travel alot I would like to keep a copy of the map with me in case something happens and I lose the map on the PC III so's I can just reload it and keep going. They will reinstall it here no problem but that wouldn't help me if I am 5000 Km away and say battery goes dead and I lose the memory on the PC III does it?
Anyone know if you can copy the map off the PC III after it is loaded?
I understand they don't want people copying the maps that they build but I think it would be relevent to the bike it was made for ie: pipe config / air intake / engine build etc?

**ringadingh** · 03-29-2008, 07:17 PM

Could you not see the map when its on the computer and record the numbers and rpms, or load a map that is close and adjust it to what is shown on the computer.

gopjohnny · 03-29-2008, 07:22 PM

$350 just to map? no parts? no rejet? just to map???

rewindgy · 03-29-2008, 08:48 PM

Haven't had it done yet! The first Stealer I found out later did not have even sniffer and was just goin off downloaded maps off the Internet!!!
And yes $350 just to map on the Dyno!

stangcrasher · 03-31-2008, 05:49 AM

Hey if you decide to sell that power commander you have a buyer just let me know.

rewindgy · 04-01-2008, 07:47 AM

Send me an e-mail with your address etc. I have decided to take the money and buy 2 - Scala Rider Q2 headsets.

03-25-2008, 04:31 PM	#1
rewindgy Advanced Member Join Date: Jul 2007 Location: Calgary, Alberta, Canada Posts: 959	Power Commander New PC III in box - is the USB style $150 plus shipping ( should be cheap) OBO For 1600 Nomad - SOLD - Login or Register to Remove Ads
	0

03-28-2008, 08:14 PM	#2
stangcrasher Jr. Member Join Date: Feb 2008 Location: Mt. Eaton, OH Posts: 7	Power Commander Ever been installed on anything? Sounds like a great price and i'll be interested if i know for sure it is brand new and nothing wrong with it.
	0

03-29-2008, 07:04 PM	#3
rewindgy Advanced Member Join Date: Jul 2007 Location: Calgary, Alberta, Canada Posts: 959	Power Commander Brand new in the box - box was opened just to inspect as to that everything was there! Full story - had one installed by Dealer - the original never worked properly - found out Tech who installed it broke the connectors and water was shorting out the connectors - I pulled out the damaged unit and gave back to dealer - they supplied this new one and I never put it back in! When they gave me the new replacement I opened box to make sure that nothing was missing and that it was indeed a new unit! Now there is a new Shop in town that has a Brand new Dyno from Dynojet and they are doing complete Dyno tuning for $350 but they won't give out a copy of the map. I'm not sure if I will go for it as since I travel alot I would like to keep a copy of the map with me in case something happens and I lose the map on the PC III so's I can just reload it and keep going. They will reinstall it here no problem but that wouldn't help me if I am 5000 Km away and say battery goes dead and I lose the memory on the PC III does it? Anyone know if you can copy the map off the PC III after it is loaded? I understand they don't want people copying the maps that they build but I think it would be relevent to the bike it was made for ie: pipe config / air intake / engine build etc?
	0

03-29-2008, 07:17 PM	#4
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Power Commander Could you not see the map when its on the computer and record the numbers and rpms, or load a map that is close and adjust it to what is shown on the computer. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

03-29-2008, 07:22 PM	#5
gopjohnny Member Join Date: Feb 2008 Location: Moulton Alabama Posts: 304	Power Commander $350 just to map? no parts? no rejet? just to map??? Login or Register to Remove Ads
	0

03-29-2008, 08:48 PM	#6
rewindgy Advanced Member Join Date: Jul 2007 Location: Calgary, Alberta, Canada Posts: 959	Power Commander Haven't had it done yet! The first Stealer I found out later did not have even sniffer and was just goin off downloaded maps off the Internet!!! And yes $350 just to map on the Dyno!
	0

03-31-2008, 05:49 AM	#7
stangcrasher Jr. Member Join Date: Feb 2008 Location: Mt. Eaton, OH Posts: 7	Power Commander Hey if you decide to sell that power commander you have a buyer just let me know.
	0

04-01-2008, 07:47 AM	#8
rewindgy Advanced Member Join Date: Jul 2007 Location: Calgary, Alberta, Canada Posts: 959	Power Commander Send me an e-mail with your address etc. I have decided to take the money and buy 2 - Scala Rider Q2 headsets.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Power Commander	just call me Mr. Hibbs	Parts & Accessories	0	05-11-2011 10:33 PM
Power Commander	just call me Mr. Hibbs	1500 & 1600 Nomad	16	12-11-2009 08:29 PM
power commander and v&h	borto1990	Vulcan Nomad/Vaquero/Voyager	9	03-20-2009 11:53 AM
Power Commander	basco	1500 & 1600 Nomad	9	01-07-2008 06:36 PM
Power Commander	waynem	Vulcan Nomad/Vaquero/Voyager	12	07-13-2007 11:14 AM