|
07-27-2015, 08:39 PM | #1 |
Member
Join Date: Jul 2015
Posts: 282
|
Can someone post some pics of the marble mod?
I am installing my V&H pipes tomorrow and have read a lot on here about putting a marble into the hose under the right side dog bowl to keep popping/backfiring to a minimum. Unfortunately none of the gadget links to actually see exactly where the marble is supposed to go will work for me. Just a blank page comes up. I do see 2 hoses in there when I remove the cover, but am not sure which end they are supposed to go in. Do you have to also plug the area that the hoses were attached to or just leave them open? Sorry for sounding stupid, but I'm not familiar with these FI bikes at all. Now give me a carb and I will show you how to rebuild and jet it right! Thanks for any help you all can give me.
Login or Register to Remove Ads |
|
07-28-2015, 09:10 PM | #2 |
Member
Join Date: Jul 2015
Posts: 282
|
Anyone? I just installed my V&H pipes and am getting a lot of popping on decel and have heard that this mod helps minimize that.
|
|
07-28-2015, 09:44 PM | #3 |
Join Date: Jul 2007
Location: Peoples Republic of New York State
Posts: 15,154
|
__________________
Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4] |
|
07-28-2015, 09:45 PM | #4 |
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
|
Take a look at this attachment
__________________
Dave Jesse 2012 1700 Gray/Black Voyager 2006 1600 Nomad Green/Silver Sold VBA #1108 2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers 2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers 2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers 2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers |
|