Chuckster's Dual-Plate Setup - Thoughts - Page 3

chuckster131 · 01-15-2011, 05:12 PM

Quote:

Originally Posted by markclark57

Just (finally) ordered Joe's single plate system. Like the look better. . . Looking forward to the install and test drive.
Hey, Joe. . . Any tips on K&N filters other than listed???
P.S. Max flow over $$$

Shipped it out today so you will see it there by Tuesday. I recommend the K-N as I make the stand off in the middle of the plate to accommodate that kit.

jasonc32amg · 01-15-2011, 05:36 PM

Quote:

Originally Posted by markclark57

Just (finally) ordered Joe's single plate system. Like the look better. . . Looking forward to the install and test drive.
Hey, Joe. . . Any tips on K&N filters other than listed???
P.S. Max flow over $$$

I'm just wrapping up the single intake install. It's not bad but I did have a panic moment Joe was able to quickly quell regarding the IACS tubes. My wife bought me a dremel for my bday and that made the job of getting rid of the crossover tube a 5 minute affair. I did the coasters at the same time and it is really cleaning the look of the bike up. I hate all this al gore crap on my bike. I just have to take the wife some dinner at work and pick up some zip ties and I'll be ready for a test run tonight...

chuckster131 · 01-15-2011, 07:16 PM

No problem Jason, glad I could help ya...

Let us know your feedback, when you get back from your test ride.

macmac · 01-15-2011, 08:29 PM

Taranis, You really know how to kick a guy when 'E's down doncha

Man i got PMS (parked motorcycle syndrome)

You just leave my La Batt's alone. I been at these since before they were Glacier Bay with a bottle opener on the bottom of each and every bottle and besides i can't get kick ass Brador here.

Sure I have to do a little dreaming, but Hell son, that's still legal, or it was last time I checked.

**taranis** · 01-15-2011, 09:20 PM

Kick a guy? Moi? Why I would never.. (that I'd admit to

) You're armed anyway, and I have enough holes.

Copy that on the PMS.. ol' man winter hit here too, but all we get is rain. Bleh.. :(

**markclark57** · 01-28-2011, 02:52 PM

Hey Joe, Just got in my first ride with the new intake. I had it installed at Lynnwood Cycle Barn. They didn't get the right filter # from K&N so the Tech modified the dog bowl to clear the tank and use the K&N I was running on the left in the new intake. Looks good, but I'll still be in the market for the one you designed it for. Do you offer the right one separately for the single plate kit?

**Cajunrider** · 01-28-2011, 04:03 PM

Quote:

Originally Posted by macmac

Taranis, You really know how to kick a guy when 'E's down doncha

Man i got PMS (parked motorcycle syndrome) You just leave my La Batt's alone. I been at these since before they were Glacier Bay with a bottle opener on the bottom of each and every bottle and besides i can't get kick ass Brador here.

Sure I have to do a little dreaming, but Hell son, that's still legal, or it was last time I checked.

Sorry for the hijack but I gotta tell Mac that I'm leaving on the bike right now in a tee shirt and vest. I had to kick ya Mac.

**taranis** · 01-28-2011, 04:05 PM

74 here and sunny. Tomorrow is more of the same.

Sorry, mac! But ya know I just gotta!!

deacon · 01-28-2011, 08:05 PM

I only live twenty or thirty miles from mac. What you guys are doing is WRONG! "sniff"

**minst7877** · 01-29-2011, 11:20 AM

Quote:

Originally Posted by Cajunrider

Quote:

Originally Posted by macmac

Taranis, You really know how to kick a guy when 'E's down doncha

Man i got PMS (parked motorcycle syndrome) You just leave my La Batt's alone. I been at these since before they were Glacier Bay with a bottle opener on the bottom of each and every bottle and besides i can't get kick ass Brador here.

Sure I have to do a little dreaming, but Hell son, that's still legal, or it was last time I checked.

Sorry for the hijack but I gotta tell Mac that I'm leaving on the bike right now in a tee shirt and vest. I had to kick ya Mac.

Man this is just plain mean to those of us with parked bikes.

DC

**billmac** · 01-29-2011, 01:24 PM

Rode about 125 miles yesterday, mostly on backroads. Most of the time in a T-shirt and blue jeans. Mid 70's. Rub it in, rub it in. :) Course in August you can't stand it here.

dcubed1988 · 02-03-2011, 08:57 PM

Does anyone have a picture of the left side of the bike if you install the single plate kit (no dog bowl)?

hammer · 02-03-2011, 11:01 PM

Cool Taranis. Thanks for the report. The kit is on my list along with a TFI. What altitude are you at in Grand Prairie Taranis?

**MAS Tequila** · 02-04-2011, 12:22 AM

Quote:

Originally Posted by dcubed1988

Does anyone have a picture of the left side of the bike if you install the single plate kit (no dog bowl)?

Take a look

MT

talon · 06-17-2012, 07:03 PM

Ok, one more question that I think was just answered, but i like redundancy like saving backup files. I like the symmetry that the two bowls gives the bike and I have the "live to ride" aftermarket ones anyway. I want to keep them but i think i want to go with the dual plate setup. I have a K&N filter in the left side now with the Cobra true dual mufflers. I do not have tfi or fuel processor. If I ordered your kit Chuckster, I would want to go ahead and have you supply the K&N filter that goes on the right. What else do I need or do I need anything else? At this point, I haven't worried about installing the coasters, but don't know. Would love the input.

Thanks,
T

01-15-2011, 07:16 PM	#33
chuckster131 Sr. Member Join Date: Sep 2007 Location: Jackson, Michigan Posts: 1,367	Chuckster's Dual-Plate Setup - Thoughts No problem Jason, glad I could help ya... Let us know your feedback, when you get back from your test ride. __________________ Joe (Chuckster) Norris Jackson, Michigan 2007 Goldwing 2010 Voyager (Blue/Silver)sold 2001 Nomad (gone, but not forgotten) www.chucksterscustoms.com
	0

01-15-2011, 08:29 PM	#34
macmac Sr. Contributor Join Date: Apr 2008 Location: Tamworth New Hampster 06 1600 Posts: 12,484	Chuckster's Dual-Plate Setup - Thoughts Taranis, You really know how to kick a guy when 'E's down doncha Man i got PMS (parked motorcycle syndrome) You just leave my La Batt's alone. I been at these since before they were Glacier Bay with a bottle opener on the bottom of each and every bottle and besides i can't get kick ass Brador here. Sure I have to do a little dreaming, but Hell son, that's still legal, or it was last time I checked. __________________ 06 1600 Nomad Just call me Mac molon labe come and get it
	0

01-15-2011, 09:20 PM	#35
taranis Join Date: Aug 2008 Location: Grand Prairie, TX Posts: 802	Chuckster's Dual-Plate Setup - Thoughts Kick a guy? Moi? Why I would never.. (that I'd admit to ) You're armed anyway, and I have enough holes. Copy that on the PMS.. ol' man winter hit here too, but all we get is rain. Bleh.. :( __________________ _______________________ "Taranis" and the Lovely Ann KawaNOW Oldschool #885 His: 2006 Nomad Hers: 2008 VN900 Classic LT Login or Register to Remove Ads
	0

01-28-2011, 02:52 PM	#36
markclark57 Join Date: Jun 2010 Location: Phoenix, AZ Posts: 3,108	Chuckster's Dual-Plate Setup - Thoughts Hey Joe, Just got in my first ride with the new intake. I had it installed at Lynnwood Cycle Barn. They didn't get the right filter # from K&N so the Tech modified the dog bowl to clear the tank and use the K&N I was running on the left in the new intake. Looks good, but I'll still be in the market for the one you designed it for. Do you offer the right one separately for the single plate kit? __________________ 2006 Vulcan 1600 Classic "George III" (Patricia's) 2006 Vulcan 1600 Nomad "Grace" (Mark's) Mark Clark VBA #1619 TaibhseDaid@Gmail.Com "Irish" @ Maricopa County Chapter of B.A.C.A. Phoenix, AZ
	0

01-28-2011, 04:05 PM	#38
taranis Join Date: Aug 2008 Location: Grand Prairie, TX Posts: 802	Chuckster's Dual-Plate Setup - Thoughts 74 here and sunny. Tomorrow is more of the same. Sorry, mac! But ya know I just gotta!! __________________ _______________________ "Taranis" and the Lovely Ann KawaNOW Oldschool #885 His: 2006 Nomad Hers: 2008 VN900 Classic LT
	0

01-28-2011, 08:05 PM	#39
deacon Member Join Date: Aug 2010 Location: Spencorport, NY Posts: 325	Chuckster's Dual-Plate Setup - Thoughts I only live twenty or thirty miles from mac. What you guys are doing is WRONG! "sniff"
	0

01-29-2011, 01:24 PM	#41
billmac Join Date: Apr 2008 Posts: 1,472	Chuckster's Dual-Plate Setup - Thoughts Rode about 125 miles yesterday, mostly on backroads. Most of the time in a T-shirt and blue jeans. Mid 70's. Rub it in, rub it in. :) Course in August you can't stand it here.
	0

02-03-2011, 08:57 PM	#42
dcubed1988 Jr. Member Join Date: Jul 2010 Location: Murray, KY Posts: 36	Chuckster's Dual-Plate Setup - Thoughts Does anyone have a picture of the left side of the bike if you install the single plate kit (no dog bowl)?
	0

02-03-2011, 11:01 PM	#43
hammer Sr. Member Join Date: Feb 2009 Posts: 1,329	Chuckster's Dual-Plate Setup - Thoughts Cool Taranis. Thanks for the report. The kit is on my list along with a TFI. What altitude are you at in Grand Prairie Taranis? __________________ Hammer aka CrocHammer KawaNow#00988, VROC#26389, VR#2202 Abbotsford, BC, Canada 2006 Black Nomad
	0

06-17-2012, 07:03 PM	#45
talon Member Join Date: Mar 2010 Location: Van Buren, AR Posts: 462	Ok, one more question that I think was just answered, but i like redundancy like saving backup files. I like the symmetry that the two bowls gives the bike and I have the "live to ride" aftermarket ones anyway. I want to keep them but i think i want to go with the dual plate setup. I have a K&N filter in the left side now with the Cobra true dual mufflers. I do not have tfi or fuel processor. If I ordered your kit Chuckster, I would want to go ahead and have you supply the K&N filter that goes on the right. What else do I need or do I need anything else? At this point, I haven't worried about installing the coasters, but don't know. Would love the input. Thanks, T
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chucksters Dual Plate Question	hammer	1500 & 1600 Nomad	8	08-08-2011 10:46 AM
Dual Plate and Dynabead Mod	ndbigfish	Vulcan Nomad/Vaquero/Voyager	6	01-09-2011 11:02 AM
Arrived! Chuckster's Dual-Plate Intake mod	taranis	1500 & 1600 Nomad	14	01-06-2011 07:38 AM
Chuckster Dual Plate Intake Installation	Cajunrider	Engine	0	11-08-2010 04:43 PM
SOLDChuckster's dual plate air intake system	Jared	Parts & Accessories	8	09-09-2010 10:51 PM