|
12-17-2012, 11:18 AM | #1 |
Advanced Member
Join Date: Feb 2012
Location: Starke Florida
Posts: 856
|
Barnett MT 25 Spring?
I have read most of the Threads regarding clutch slipping, Barnett spring/Judges washers etc., but since every situation is not exactly the same, I will ask a few questions regarding my bike.
I just started noticing a very slight slip in both 4th and 5th gear when I jump on the throttle. I keep hearing about the Barnet MT 25 heavy duty spring, but as I understand it, when you order this Barnett spring as I did, it comes as a set of 6 springs. Does Gadget have instructions for Barnett spring installation? Should I also install the Judges washers while I am in there? How do I check the clutch plates/disks to make sure they are within specs? I have heard that most of the time, just a Barnett spring replacement alone will cure any slippage ? Here is a pic of me with some of my friends back in 68.
__________________
"Ride it like you stole it"! 2008 1600 Nomad 56K miles "BlueBelle" 2004 1500 Nomad 102 K miles "Black Beauty" ABATE Black Creek Chapter Amvet Rider Post 86 http://www.facebook.com/AmvetPost86 Weston A. Price Foundation member. Vegetarian...... An old Indian word meaning "Bad Hunter" Legalize Freedom! Question Authority! "Im in love with the waitress, and I dont even know her name" "Boys" Gone Wild" ! Mainstreet Station 2012 Daytona Bikeweek Login or Register to Remove Ads |
|
12-17-2012, 11:44 AM | #2 |
Advanced Member
Join Date: Feb 2011
Location: Glendale, Arizona
Posts: 987
|
Clutch spring replacement
__________________
VBA member #01682 Green 1999 Nomad 1500 carb'd 43,000 miles JOG'd at 20,000, JOG failed at 40,000 SOG'd at 40,000 Darksider |
|
12-17-2012, 11:49 AM | #3 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
Regardless of the brand of spring you use the installation is the same, most times thats all you have to do, since the plates and discs are still within spec.You can use vernier calipers to measure the discs and plates.
When I replaced the spring in my bike at about 38k, the spring was worn but the plates and discs measured up almost as good as new. Its an easy job to do, that only takes a couple hours.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
12-17-2012, 11:52 AM | #4 |
Advanced Member
Join Date: Feb 2011
Location: Glendale, Arizona
Posts: 987
|
He's thinking the clutch has multiple springs I believe.
If the kit you ordered has six springs in it, I think you ordered the wrong kit. this is not a Nomad. This is from a Nomad. Here's a photo of the Nomad spring on the left and I believe the Mean streak on the right.
__________________
VBA member #01682 Green 1999 Nomad 1500 carb'd 43,000 miles JOG'd at 20,000, JOG failed at 40,000 SOG'd at 40,000 Darksider
Last edited by danimal2; 12-17-2012 at 12:06 PM.
|
|
12-17-2012, 12:12 PM | #6 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Quote:
I don't know where the "set of 6 springs" came from. Yes, gadget's fixit page has detailed instructions for replacing the clutch spring. It is the same with a Barnett or Meanstreak spring, except you don't need the Judge's washers with the Barnett.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
12-17-2012, 12:14 PM | #7 |
Advanced Member
Join Date: Feb 2012
Location: Starke Florida
Posts: 856
|
YES, I ordered the wrong spring!
It said, MT 25 so I figured that was the one! http://www.phatperformanceparts.com/...2-00-01025.htm
__________________
"Ride it like you stole it"! 2008 1600 Nomad 56K miles "BlueBelle" 2004 1500 Nomad 102 K miles "Black Beauty" ABATE Black Creek Chapter Amvet Rider Post 86 http://www.facebook.com/AmvetPost86 Weston A. Price Foundation member. Vegetarian...... An old Indian word meaning "Bad Hunter" Legalize Freedom! Question Authority! "Im in love with the waitress, and I dont even know her name" "Boys" Gone Wild" ! Mainstreet Station 2012 Daytona Bikeweek |
|
12-17-2012, 12:29 PM | #8 |
Advanced Member
Join Date: Feb 2011
Location: Glendale, Arizona
Posts: 987
|
You might want to go get a copy of the manual. I find that between the manual and different online parts diagrams you can figure most of this stuff out.
Get your free manaul here
__________________
VBA member #01682 Green 1999 Nomad 1500 carb'd 43,000 miles JOG'd at 20,000, JOG failed at 40,000 SOG'd at 40,000 Darksider |
|
12-17-2012, 12:49 PM | #9 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
Quote:
I didn't see the MT-25 diaphragm spring on Phat's website. I think most of us ordered the spring from Mosely's, but I thought I heard they closed up.
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17
Last edited by cactusjack; 12-17-2012 at 12:52 PM.
|
|
|
12-17-2012, 12:55 PM | #10 |
Advanced Member
Join Date: Feb 2011
Location: Glendale, Arizona
Posts: 987
|
I'm guessing that the MT-25 designation is for a group of springs and not a specific one. When you search "Barnett MT-25 clutch spring" all kinds of springs pop up (no pun intended). I don't know.........just guessing here.
__________________
VBA member #01682 Green 1999 Nomad 1500 carb'd 43,000 miles JOG'd at 20,000, JOG failed at 40,000 SOG'd at 40,000 Darksider
Last edited by danimal2; 12-17-2012 at 01:03 PM.
|
|
12-17-2012, 01:05 PM | #11 | |
Join Date: Mar 2009
Location: Greeley, Colorado
Posts: 6,772
|
Quote:
__________________
Jared
VBA #1051 (Former President) |
|
|
12-17-2012, 01:09 PM | #12 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
The wrong spring explains a lot, no wonder you were confused.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 |
|
12-17-2012, 01:26 PM | #13 |
Top Contributor
|
I guess the MT-25 by Barnett is a "spring" but not in the conventional sense. Sorry for you that you ordered the wrong thing. Can you send it back?? I don't recall where I ordered my Barnett from but I will say that it was pretty easy to change out {once you get that main nut off.} Make sure you have some kind of impact wrench to remove it. It'll be a lot easier than a "power bar". And the difference in the feel of the clutch is significant to say the least. But you get use to it quickly and you'll love it.
Good luck
__________________
Nomad'a What ! "rickyboy" Richard Cole Canada West Region 108 Mile Ranch, British Columbia Canada Vulcan Bagger Assoc. #00722 Black 2006 Nomad https://cdn2.iconfinder.com/data/ico...Book_32x32.png |
|
12-17-2012, 01:31 PM | #14 | |
Advanced Member
Join Date: Feb 2012
Location: Starke Florida
Posts: 856
|
Where in the world can I get a hold of a Barnett MT 25 spring????
Quote:
They only sell spring if you buy the whole "clutch kit" for $129. Tried Sherms, but no luck there either. WTF? A link anyone?
__________________
"Ride it like you stole it"! 2008 1600 Nomad 56K miles "BlueBelle" 2004 1500 Nomad 102 K miles "Black Beauty" ABATE Black Creek Chapter Amvet Rider Post 86 http://www.facebook.com/AmvetPost86 Weston A. Price Foundation member. Vegetarian...... An old Indian word meaning "Bad Hunter" Legalize Freedom! Question Authority! "Im in love with the waitress, and I dont even know her name" "Boys" Gone Wild" ! Mainstreet Station 2012 Daytona Bikeweek |
|
|
12-17-2012, 01:31 PM | #15 |
Join Date: Jan 2009
Location: Psychiatric Ward FL
Posts: 3,429
|
Order part # 92145-1449 from Kaw, that is the older 1500 meanie spring. Get a set of Judges Washers and put them in.
That's it. MT
__________________
MT 2016 FLHP Psychiatric Ward FL VBA 936 |
|