|
07-23-2016, 09:39 AM | #46 | |
Member
Join Date: May 2016
Posts: 202
|
Quote:
Login or Register to Remove Ads |
|
|
07-23-2016, 12:47 PM | #47 |
Member
Join Date: Feb 2013
Location: California
Posts: 157
|
Who makes that lighted license plate frame?
__________________
2016 Vaquero ABS Totaled w/1600 miles |
|
07-25-2016, 01:23 PM | #48 |
Member
Join Date: May 2016
Posts: 202
|
|
|
07-25-2016, 02:21 PM | #49 |
Advanced Member
Join Date: Sep 2015
Location: Grand Prairie, TX
Posts: 654
|
Anyone want to sell the old reflectors?
__________________
2011 Vaquero V&H slip ons Roaring Toyz intake PCV (removed) Ivan's ECU flash |
|
07-29-2016, 12:16 PM | #50 |
Advanced Member
Join Date: Jun 2014
Location: crooked river ranch oregon
Posts: 723
|
Went to my local Lowes and they had these little black plastic plugs with a one way shank that locks down inside the space between the outer bag and the inside after you cut the part out of the inside, and remove the screws. I got lucky because my bags are black on the lower part where the holes were. I then placed a couple of little stick-on chrome skulls on the bags where the reflectors used to be. I also removed the one on the rear above the license plate and stuck on some skull/flames chrome there too.
__________________
2012 Vaquero S.E. Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors. Login or Register to Remove Ads |
|
07-29-2016, 04:35 PM | #51 |
Advanced Member
Join Date: Jun 2014
Location: crooked river ranch oregon
Posts: 723
|
Here are those plugs I bought to fill the reflector holes in the saddle bags. Lowe's has them in stock normally.
__________________
2012 Vaquero S.E. Chuckster's tear drop intake, Freedom true dual racing exhaust, Ivan flash, Clearview windscreen, Corbin gunfighter seat, Clockwerk's hugger style front fender, Kawasaki KQR backrest and luggage rack, kuryakyn iso grips and rear passenger boards, front highway pegs, revolutionspeed clutch and primary covers and reservoir and switch box covers and Kuryakyn skeleton rearview mirrors. |
|
07-31-2016, 12:46 PM | #52 |
Member
Join Date: Feb 2013
Location: California
Posts: 157
|
Here's a better and smaller alternative. Can be found at local hardware stores or home improvement stores. Sizes start at 1/16", 1/4", etc
__________________
2016 Vaquero ABS Totaled w/1600 miles |
|
10-25-2016, 09:12 AM | #53 | |
Member
Join Date: Oct 2015
Location: Tillsonburg, Ontario
Posts: 148
|
Quote:
Question though on how do you wire to your power source? Drill a hole between the bag and bike? Please include a picture if you can. Thanks |
|
|
11-07-2016, 07:38 PM | #54 |
Member
Join Date: Jan 2012
Location: Concord, NC
Posts: 406
|
Hi, Sorry for the late reply. I drilled a small hole on the back wall of the bag and used a rubber grommet that just fits the wires. No other holes are necessary and it wouldn't be a big deal to plug the hole drilled with the same style fastener listed in the thread to reverse the procedure and reinstall the reflector on the bags to return to stock.
Sorry no pics yet; I'm rarely home.
__________________
'11 Vaquero '00 Nomad 1500fi - Sold - '92 Vulcan BUBF 1500 Bobber -Sold - VBA Member # 02057 |
|