Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > Vulcan Nomad/Vaquero/Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-19-2018, 05:40 AM   #1
MrMikey   MrMikey is offline
Member
 
Join Date: Feb 2016
Location: Nova Scotia
Posts: 403
Ivans install instructions

Anyone have a copy or even a Coles notes version of the install instructions for Ivans ECU? I forgot the install sequence, lost the ^&&&^^ paper and I want to check something..........Mike
__________________
'09 Voyager



Login or Register to Remove Ads
 
Reply With Quote
Old 07-19-2018, 12:42 PM   #2
MidIAVoyager   MidIAVoyager is offline
Jr. Member
 
MidIAVoyager's Avatar
 
Join Date: Jun 2015
Location: Ankeny, IA
Posts: 33
If your still on the 09 voyager it's as follows per the sheet I have from Ivan's

In order to install your newly programmed ECU the following must be followed so that it can be re-acquainted with your dash.
1) make sure the ignition key is in the off position & install UCU
2) turn ignition key on for 5 seconds (you will see error code 98 on dash)
3) turn ignition key off
4) disconnect negative battery cable for 5 seconds
5) reconnect nedative battery cable and enjoy
__________________

MidIAVoyager
Randy V.
VBA Member #03330
 
Reply With Quote
Old 07-19-2018, 01:31 PM   #3
MrMikey   MrMikey is offline
Member
 
Join Date: Feb 2016
Location: Nova Scotia
Posts: 403
That's what I was after, much appreciated, thanks............Mike
__________________
'09 Voyager
 
Reply With Quote
Old 07-20-2018, 01:31 AM   #4
BonVoyager   BonVoyager is offline
Member
 
BonVoyager's Avatar
 
Join Date: Aug 2017
Location: Brodheadsville, PA
Posts: 187
Quote:
Originally Posted by MidIAVoyager View Post
If your still on the 09 voyager it's as follows per the sheet I have from Ivan's

In order to install your newly programmed ECU the following must be followed so that it can be re-acquainted with your dash.
1) make sure the ignition key is in the off position & install UCU
2) turn ignition key on for 5 seconds (you will see error code 98 on dash)
3) turn ignition key off
4) disconnect negative battery cable for 5 seconds
5) reconnect nedative battery cable and enjoy
Is the procedure different for different years? Just curious. Ivan installed mine and I never got a sheet.
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.