New style BAK

chuckster131 · 10-04-2014, 07:43 PM

I've been working with a Mr. Larson of Colorado Springs on a open concept BAK system, for the 1700 Bikes.
This one is a 7" in the pictures and I'm leaning towards a 9" to fill the persay void area between the cyclinders better.

Please give any feedback you wish I take it all in consideration

**ringadingh** · 10-04-2014, 08:01 PM

It looks good to me.

redjay · 10-04-2014, 08:29 PM

The Caddman mod a la Chuckster. Nice.

dabull · 10-05-2014, 12:29 AM

Looking forward to seeing the final product;)

Bikecustom · 10-05-2014, 05:00 AM

Looking good, I agree the 9" would be better. Very happy with your current model.

chuckster131 · 10-05-2014, 09:17 AM

The 7" is final and as for the 9" I would like someone to test and keep.
This will give 3 options of BAK kits to choose from all will gain same results, but have different looks

Gypsy Dragon · 10-06-2014, 11:24 AM

Could you post a pic of the mounting plate?

chuckster131 · 10-06-2014, 11:34 AM

Sorry I don't have one bare before filter and cover were installed, I'll see if he will take cover off and snap a couple pics

Boscoe · 10-06-2014, 12:52 PM

Looks nice! Simple and clean!

**JPB** · 10-06-2014, 01:27 PM

Looks real good!

Peg · 10-06-2014, 04:06 PM

Do you have any photos of your current "under the OEM air cover" model please Joe? I'm wavering near the edge of ordering one, but just can't quite picture where it takes it's air supply from.

redjay · 10-06-2014, 05:51 PM

PM sent

chuckster131 · 10-06-2014, 06:24 PM

Quote:

Originally Posted by redjay

PM sent

No PM so far
You can email me chuckster1_31@comcast.net

chuckster131 · 10-06-2014, 06:29 PM

Quote:

Originally Posted by Peg

Do you have any photos of your current "under the OEM air cover" model please Joe? I'm wavering near the edge of ordering one, but just can't quite picture where it takes it's air supply from.

The back plate is open as the outer cover captures the 4 outer finger areas and the K-N filter seals to the groove in the plate and cover, centers right in the circle part of the outer cover..
This allows a 100% air flow all around

Peg · 10-06-2014, 07:05 PM

Thanks Joe... and Redjay. I'll come shopping in a few days I think Joe, when my new credit card cycle rolls into a new month

10-04-2014, 08:01 PM	#2
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	It looks good to me. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

10-05-2014, 05:00 AM	#5
Bikecustom Jr. Member Join Date: May 2013 Location: Sweden Posts: 44	Looking good, I agree the 9" would be better. Very happy with your current model. Login or Register to Remove Ads
	0

10-05-2014, 09:17 AM	#6
chuckster131 Sr. Member Join Date: Sep 2007 Location: Jackson, Michigan Posts: 1,367	The 7" is final and as for the 9" I would like someone to test and keep. This will give 3 options of BAK kits to choose from all will gain same results, but have different looks __________________ Joe (Chuckster) Norris Jackson, Michigan 2007 Goldwing 2010 Voyager (Blue/Silver)sold 2001 Nomad (gone, but not forgotten) www.chucksterscustoms.com
	0

10-06-2014, 11:24 AM	#7
Gypsy Dragon Member Join Date: Jan 2014 Location: Round Rock, Tx. Posts: 493	Could you post a pic of the mounting plate? __________________ 1997 KZ1000 Police 2003 Kawasaki Z1000 w/ 149k mi (sold) (un-sold!) 2013 Vaquero in Green (the fastest color) Thunder Mfg Prototype Hi Performance Kit Rev 2 109 cid Klockwerks Windshield Corbin Young Gun Throttle Mod Freedom Performance 2-1 Roarin Toyz Intake PCV with AutoTune Ivanized ECU
	0

10-06-2014, 11:34 AM	#8
chuckster131 Sr. Member Join Date: Sep 2007 Location: Jackson, Michigan Posts: 1,367	Sorry I don't have one bare before filter and cover were installed, I'll see if he will take cover off and snap a couple pics __________________ Joe (Chuckster) Norris Jackson, Michigan 2007 Goldwing 2010 Voyager (Blue/Silver)sold 2001 Nomad (gone, but not forgotten) www.chucksterscustoms.com
	0

10-04-2014, 08:29 PM	#3
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,930	The Caddman mod a la Chuckster. Nice.
	0

10-05-2014, 12:29 AM	#4
dabull Sr. Member Join Date: Oct 2008 Location: Crestview, FL Posts: 2,409	Looking forward to seeing the final product;)
	0

10-06-2014, 12:52 PM	#9
Boscoe Member Join Date: Apr 2013 Location: Jefferson City, Missouri Posts: 372	Looks nice! Simple and clean! __________________ 2011 Voyager 1700, Ebony/Pearl Meteor Gray Bridgestone Exedra Max tires in stock sizes Heated Avon grips with Throttle Mod Cobra Scalloped Slip-ons Thunder Mfg. Intake Gasket DEI Titanium exhaust header wrap Corbin heated seat. Polk Audio db521 speakers Mobil 1 Racing 4T 10W-40 with Mobil 1 M1-110 filter Kuryakyn Longhorn Offset Dually Highway Pegs Chrome passenger running board covers All new fluids and lube.
	0

10-06-2014, 01:27 PM	#10
JPB Join Date: Aug 2012 Location: Alvin, TX Posts: 125	Looks real good! __________________ John 2009 Nomad 1700
	0

10-06-2014, 04:06 PM	#11
Peg Sr. Member Join Date: Apr 2012 Location: West Coast, North Island, New Zealand Posts: 1,375	Do you have any photos of your current "under the OEM air cover" model please Joe? I'm wavering near the edge of ordering one, but just can't quite picture where it takes it's air supply from. __________________ Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold)
	0

10-06-2014, 05:51 PM	#12
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,930	PM sent
	0

10-06-2014, 07:05 PM	#15
Peg Sr. Member Join Date: Apr 2012 Location: West Coast, North Island, New Zealand Posts: 1,375	Thanks Joe... and Redjay. I'll come shopping in a few days I think Joe, when my new credit card cycle rolls into a new month __________________ Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold)
	0