CCS-100 cruise control Help

In Gadgets instructions for wiring the cruise control you're supposed to attach a wire to the only black wire from the ECM. I have 3 wires, 1 is black with a red dots spaced about an inch apart, black with a yellow line and black with a white line. None of the wires are solid black. Has anyone done this install on a 1600 Nomad. I would appreciate any feedback, Thanks Madno

[oldbikers]

I have installed the cruise control but I must be reading something wrong gadget says to connect to the black wire from the ecu that supplies power to number one coil is this what you are talking about?

Thanks Oldbiker, some how it has become alot clearer to me now.I have no idea how i was thinking ealier.Ha Ha Ha, thanks for the info. Madno

[cactusjack]

You are referring to the dark blue wire, right? Just connect it to the right side coil, right next to the front jug. Use a "Y" adapter and connect the single end of the "Y" to the coil terminal closest to you (if you're looking at the coil). Connect the dark blue wire and the wire you unplugged from the coil to the other two ends.

O.k. thats what I'll do thanks cactusjack.

Would anyone have a Napa part number for the vacume check valve. My local Napa dealer needs more to go on.Thanks.

[cactusjack]

Originally Posted by bshwetz

Would anyone have a Napa part number for the vacume check valve. My local Napa dealer needs more to go on.Thanks.

Here you go...

Vacuum advance check valve
Part: CRB 2970
Product Line: Echlin Fuel System

Note: I had pasted a link here, but apparently it is only good for a limited period of time. Go to www.napaonline.com and click on "Search NAPA Catalog using PartsPRO SE", enter "CRB-2970" in the search box and select Part Number.


The online price says $9.49, I think I paid a little more than that in the store.

[bobzinger]

I'm using my saddlebag guard for a vacuum cannister. What size hose barb is used for the vacuum Hose. size..1/4", 3/16"??

[cactusjack]

Originally Posted by bobzinger

I'm using my saddlebag guard for a vacuum cannister. What size hose barb is used for the vacuum Hose. size..1/4", 3/16"??

3/16".

Thanks again C.J..

I went to Napa with the part number and they told me this part is no longer availble in Canada through Napa. However the partsmen gave me a cross reference number for a store called Bumper to Bumper and they had one in stock.