Totally off topic as far as motorcycles.

denny 606 · 09-13-2017, 08:39 PM

I'm working on an old Golf Cart with a buddy for his wife. I need the clutch bolt that goes thru the clutch and into the nod if the Crankshaft.
I have determined that it is an 11 mm x 1.25 thread pitch boltabout 5 to six inches long. It wasn't in there when we pulled the clutch off the crank and we need to be able to pull the clutch pulley back on to the tapered shaft to get it to lock down again. The only way we can find said bolt is with a clutch kit which is $200. Ain't happening on the $300 EZ GO. I'd like to ask if anyone on here knows where I can get a bolt that size or some all thread rod in 11mm x 1.25 ?
Thanks in advance. It's not to be found at any of the normal sources either. I hope one of you has a go to for odd ball bolts.

That should read totally off topic, so much for my proofreading skills

09-13-2017, 08:39 PM	#1
denny 606 Member Join Date: Jun 2014 Location: Inez, KY Posts: 280	Totally off topic as far as motorcycles. I'm working on an old Golf Cart with a buddy for his wife. I need the clutch bolt that goes thru the clutch and into the nod if the Crankshaft. I have determined that it is an 11 mm x 1.25 thread pitch boltabout 5 to six inches long. It wasn't in there when we pulled the clutch off the crank and we need to be able to pull the clutch pulley back on to the tapered shaft to get it to lock down again. The only way we can find said bolt is with a clutch kit which is $200. Ain't happening on the $300 EZ GO. I'd like to ask if anyone on here knows where I can get a bolt that size or some all thread rod in 11mm x 1.25 ? Thanks in advance. It's not to be found at any of the normal sources either. I hope one of you has a go to for odd ball bolts. That should read totally off topic, so much for my proofreading skills __________________ "When all is said and done, there's usually more said than done" unknown "Ride hard or stay home" Joe Robinson aka Old Dog, R.I.P Login or Register to Remove Ads
	0