|
11-13-2011, 10:21 PM | #1 |
Member
Join Date: Oct 2010
Location: Zanesville, OH
Posts: 315
|
1500 windshield
I am looking for a windshield (plastic only) for a 1500. There must be a batwing member with one left over. PM me with a price if you have one.
BTW, yes I have seen them on Ebay. Let me know what YOU have. Thanks. Login or Register to Remove Ads |
|
03-20-2012, 08:31 PM | #2 |
Jr. Member
Join Date: Sep 2009
Posts: 5
|
I have the windshield that came off of my 2004 nomad. I will take 100$ for it. It still has all of the hardware on it.
|
|
03-21-2012, 05:55 AM | #3 |
Join Date: Jun 2008
Location: NW Region
Posts: 5,222
|
Fone Man
You might want to consider a new one from Clearview if you don't need the hardware. It gets rid of the stupid little sliding seconday piece around the headlight. The little one looks terrible due to scratches between the two. The other nice thing is you can get the correct height if the OEM one did not fit you right after full adjustment. I am 6'2" with a long torso so my OEM is just a tad too short. Good luck.
__________________
VBA #659 2003 Nomad 1500 (Gone but never forgotten) 2005 Honda ST1300 - Sweet and still kickin 2006 Honda Goldwing - Best Boat in the Marina |
|
03-22-2012, 08:25 AM | #4 |
Member
Join Date: Oct 2010
Location: Zanesville, OH
Posts: 315
|
Thanks Schoeney. At only 6'0", I like that smaller piece. I can adjust the shield up and that piece down to eliminate some buffeting.
|
|
03-22-2012, 09:23 AM | #5 |
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
|
I installed a 1600 windshield on my 1500 this weekend. I thought I was going to have to make some changes to get it to fit the brackets, but everything lined up like it was made for the bike. It bolted up perfectly.
__________________
2002 Nomad aka Bountyhunter VBA #27 VROC #18951 Login or Register to Remove Ads |
|