Reckless fairing

[semo]

I know that this has probably been discussed, but i could not find anything when I did a search. I am interested in adding a reckless fairing and I am curious to know if it will work with Chucksters risers and his light kit? I really like the risers and would hate to have to remove them. If i do have to remove them do you think that the gain of the fairing will outweigh the loss of the risers? thanks.

[cocheese72]

The light kit will work. Not sure on risers, there is not a whole lot of room to rise before hitting. You could always change out bars with the stock risers, to get pull back. But the risers may work too. I will try to do a search for you.

[cocheese72]

These discuss risers on the reckless.

Links:
http://www.vulcanbagger.com/phpBB3/v...=16221&start=0
http://www.vulcanbagger.com/phpBB3/v...=15650&start=0
http://www.vulcanbagger.com/phpBB3/v...6217&start=120

[radco]

Semo, It nay be tight w Joes spacers..So I would try them..Post your results..As Joe stated you may be able to move the fairing forward a tad.Just do all the testing before paint :0 I had the HD 4" pullback risers ,it was tight but worked, didnt have my Chuckster risers when I got the fairing.so I cannt help you there
Rich