|
|
02-12-2012, 01:03 PM
|
#1 |
|
Member
Join Date: Sep 2011
Location: Warsaw, Indiana
Posts: 371
|
Power Plug Install
Shouldn't take you more than about 15 minutes... as long as you don't follow the instructions. They call for fairing removal, but I just went through the glovebox above the plug.
One warning though, as I thought I read about the filler plug removal on one of the Vulcan forums I frequent. Do not pry the old filler plug out. Once you have the glovebox out, you can get to the Phillips head screw that holds a metal bracket in place. The wires are tight there, and though a little tight to get two hands inside to plug them in, I did so.
__________________
2011 Vaquero, The pretty red kind (and fastest!) 1989 Yamaha FJ1200 VBA #01898 
Login or Register to Remove Ads |
|
|
02-12-2012, 08:06 PM
|
#4 |
|
Top Contributor
Join Date: Aug 2011
Location: North Wilkesboro, NC
Posts: 6,289
|
Thanks for the info. If it was me, I would have pried the plug out breaking the fairing in the process (if I had a VV). At least yours is less time consuming than mine. I have to cut a hole and make a wiring harness. At least the power plug I bought just snaps in.
__________________
Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860 |
|
|
Linear Mode
