offset riser for 1 inch handlbars

**Huddleston** · 01-07-2018, 10:27 AM

Is there an offset riser for 1 inch handlebars? My 13 Nomad 1700 has a batwing style fairing. I had Chucksters risers, but I had to remove them when I installed the fairing. I've seen offset risers for 7/8" handlebars, but is there one available for 1 inch bars?

**Huddleston** · 01-07-2018, 10:42 AM

This is what I am looking for, but for our 1 inch handlebars.
https://www.cyclegear.com/parts/zeta...ndlebar-risers

recumbentbob · 01-07-2018, 12:30 PM

Buy risers for 1 1/4" bars and use these adapters for 1 inch bars.

https://www.revzilla.com/motorcycle/...lebar-adapters

redjay · 01-07-2018, 01:00 PM

How about these ? Much more adjustability to get the handlebars exactly where you want them ?

https://roxspeedfx.com/collections/harley-vtwin

**Huddleston** · 01-07-2018, 02:25 PM

Quote:

Originally Posted by redjay

How about these ? Much more adjustability to get the handlebars exactly where you want them ?

https://roxspeedfx.com/collections/harley-vtwin

Great idea. The stem is only 1 inch and the existing clamps are 1 1/2 inches wide. Do you see an issue with the length of the stem? I think I'll order a set and see.

Thanks for the tip.

redjay · 01-07-2018, 02:55 PM

The only problem might be the length of your wiring and cables ?
I have a set of these risers (4 inch rise) but did not fit them on my 1300 V Star because all the cables and wiring would have to be extended which I did not want to do. There was also an issue with the speedo. The risers would not go far enough into the original clamps because the upright of the risers fouled the speedo.

halfhot · 01-12-2018, 10:33 PM

I have the Aeromach AM-4410C on my Nomad. They are a 4.25 inch riser and kept original cables, just had to reroute one of the brake lines

**Huddleston** · 01-13-2018, 07:59 AM

Thanks for the input. I have installed the 2 inch Rox Speed (extended stem) risers, and they do the trick nicely. I did have to unclip my cables to be sure none were stressed. Also, with the speedometer housing on the Nomad, I had to make sure the riser was high enough to not interfere. Once done, I am very satisfied. The handlebars are about 1 1/2 inches closer, which is perfect as one of my arms is shorter.

556ALPHA · 01-23-2018, 06:12 PM

Quote:

Originally Posted by Huddleston

Thanks for the input. I have installed the 2 inch Rox Speed (extended stem) risers, and they do the trick nicely. I did have to unclip my cables to be sure none were stressed. Also, with the speedometer housing on the Nomad, I had to make sure the riser was high enough to not interfere. Once done, I am very satisfied. The handlebars are about 1 1/2 inches closer, which is perfect as one of my arms is shorter.

Can you link which risers you used and possibly post a pic? Thanks

**MAS Tequila** · 01-24-2018, 05:17 AM

The stereo in my fairing interfered with Chucks risers.

I ended up using a set of Krome-Werks 12 apes.

That solved the issue and put the bars right where they need to be.

https://www.ebay.com/itm/Khrome-Werk...item35d13a7d36

**Huddleston** · 01-24-2018, 09:34 AM

Quote:

Originally Posted by 556ALPHA

Can you link which risers you used and possibly post a pic? Thanks

https://roxspeedfx.com/collections/h...nt=37165457162

556ALPHA · 01-24-2018, 08:27 PM

Thanks. Looking at the sets which will fit the Voyager and only black or Anodized are the options. Wondering how they would look with the Voyagers chrome.

01-07-2018, 10:27 AM	#1
Huddleston Join Date: Jun 2015 Posts: 50	offset riser for 1 inch handlbars Is there an offset riser for 1 inch handlebars? My 13 Nomad 1700 has a batwing style fairing. I had Chucksters risers, but I had to remove them when I installed the fairing. I've seen offset risers for 7/8" handlebars, but is there one available for 1 inch bars? __________________ 2013 Kawasaki Vulcan Nomad 1700 Endeavor Reversed Trike Ultimate Seat with Driver Backrest Ivan's ECU flash FUO59C4B Freedom Performance Eagle Slip Ons Luverne Kawasaki Lowering Kit Batwing fairing 2017 Indian Springfield Wife who is a great cook! Manning, SC Login or Register to Remove Ads
	0

01-07-2018, 10:42 AM	#2
Huddleston Join Date: Jun 2015 Posts: 50	This is what I am looking for, but for our 1 inch handlebars. https://www.cyclegear.com/parts/zeta...ndlebar-risers __________________ 2013 Kawasaki Vulcan Nomad 1700 Endeavor Reversed Trike Ultimate Seat with Driver Backrest Ivan's ECU flash FUO59C4B Freedom Performance Eagle Slip Ons Luverne Kawasaki Lowering Kit Batwing fairing 2017 Indian Springfield Wife who is a great cook! Manning, SC
	0

01-07-2018, 12:30 PM	#3
recumbentbob Sr. Member Join Date: Mar 2009 Location: Newburgh IN Posts: 3,404	Buy risers for 1 1/4" bars and use these adapters for 1 inch bars. https://www.revzilla.com/motorcycle/...lebar-adapters __________________ VBA #01084 "A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed."
	0

01-13-2018, 07:59 AM	#8
Huddleston Join Date: Jun 2015 Posts: 50	Thanks for the input. I have installed the 2 inch Rox Speed (extended stem) risers, and they do the trick nicely. I did have to unclip my cables to be sure none were stressed. Also, with the speedometer housing on the Nomad, I had to make sure the riser was high enough to not interfere. Once done, I am very satisfied. The handlebars are about 1 1/2 inches closer, which is perfect as one of my arms is shorter. __________________ 2013 Kawasaki Vulcan Nomad 1700 Endeavor Reversed Trike Ultimate Seat with Driver Backrest Ivan's ECU flash FUO59C4B Freedom Performance Eagle Slip Ons Luverne Kawasaki Lowering Kit Batwing fairing 2017 Indian Springfield Wife who is a great cook! Manning, SC
	0

01-24-2018, 05:17 AM	#10
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	The stereo in my fairing interfered with Chucks risers. I ended up using a set of Krome-Werks 12 apes. That solved the issue and put the bars right where they need to be. https://www.ebay.com/itm/Khrome-Werk...item35d13a7d36 __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936
	0

01-07-2018, 01:00 PM	#4
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,923	How about these ? Much more adjustability to get the handlebars exactly where you want them ? https://roxspeedfx.com/collections/harley-vtwin
	0

01-07-2018, 02:55 PM	#6
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,923	The only problem might be the length of your wiring and cables ? I have a set of these risers (4 inch rise) but did not fit them on my 1300 V Star because all the cables and wiring would have to be extended which I did not want to do. There was also an issue with the speedo. The risers would not go far enough into the original clamps because the upright of the risers fouled the speedo.
	0

01-12-2018, 10:33 PM	#7
halfhot Jr. Member Join Date: Sep 2010 Location: Nova Scotia, Canada Posts: 1	I have the Aeromach AM-4410C on my Nomad. They are a 4.25 inch riser and kept original cables, just had to reroute one of the brake lines
	0

01-24-2018, 08:27 PM	#12
556ALPHA Member Join Date: Jan 2018 Posts: 95	Thanks. Looking at the sets which will fit the Voyager and only black or Anodized are the options. Wondering how they would look with the Voyagers chrome.
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode