|
11-14-2009, 07:27 AM | #2 |
Top Contributor
Join Date: Dec 2007
Location: Aquashicola Pa.
Posts: 6,377
|
How do I Remove or Cover This?
Please help him, no one should go through life like that
__________________
I'm not prejudice I hate everyone equally;) 08 nomad blue/silver MaryJane 74,010miles VBA #299 Her's 10 900LT 36,700 09 Bath NY. 10 Lake George NY. 11 National Maggie Valley NC. 12 Pa Wilds (Wellsboro) Pa. 14 Lincoln NH. 17 National Lake George NY. |
|
11-14-2009, 07:58 AM | #3 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
How do I Remove or Cover This?
Quote:
!
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
11-14-2009, 10:03 AM | #4 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
How do I Remove or Cover This?
Is that an "Ultra Classic" trunk with the tail and brake lights? (I can't tell from the photo) ???. If so, the HD is on a thin aluminum plate that is stuck on with some pretty darn good glue. What I did with mine was to "CAREFULLY" pull it of, and I used it as a template on a thin piece of sheet metal (approx. 1/32 thick. with this thin of gage metal, you can use a good pair of scissors or snips to cut it out with). I cut it out the exact same size and painted it black. I went to the automotive repair supply shop and got some double sided tape, not the 3M type (it's too thick) but a type that is a little thicker than cellophane tape, but is used in automotive applications, and stuck my new painted plate on. it fits perfect. You can leave it plain, or put on some bling. I found an emblem for a '57 Chevy "Nomad" tailgate. I broke off the mounting studs, and used the 3M tape to secure it on with.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|
11-14-2009, 10:45 AM | #5 |
Join Date: Apr 2008
Location: (SE Louisiana)
Posts: 8,340
|
How do I Remove or Cover This?
Looks good VulcanE. Nice job.
__________________
2016 Electra Glide Ultra Limited CVO Palladium Silver / Phantom Blue 110 cu in SE 2012 Electra Glide Ultra Limited (Traded 6/22/16) Tequila Sunrise / HD Orange Vance & Hines true dual headers Rinehart 4" slip ons Screamin Eagle Super Tuner Screamin Eagle Stage 1 intake Dyno tuned H.O.G.# 4514015 2007 Nomad 1600 (Traded 6/23/12) VBA #482 Login or Register to Remove Ads |
|
11-14-2009, 11:09 AM | #6 |
Join Date: Jul 2009
Location: Fort Polk, Louisiana
Posts: 520
|
How do I Remove or Cover This?
Thanks VulcanE. That looks great. More importantly, it seems really easy.
|
|
11-14-2009, 03:25 PM | #7 |
Join Date: Jul 2008
Location: North Central Illinois
Posts: 8,575
|
How do I Remove or Cover This?
Using a little heat to help soften the glue might be of use. (Hair dryer -- not too hot).
__________________
"During times of universal deceit, telling the truth becomes a revolutionary act." "You can have your own opinion, but not your own facts." Former VBA NCR Assist Regional Leader Formerly: 2004 1500FI Bronze Nomad: 2009 & 2014 HD Ultra Current Rides: 2017 HD Ultra Limited & 2011 Can Am Spyder RTS-SE Attended: VBA National Rallies 2009, 2011, 2015; VBA/NCR Regional Rally 2010, 12, 14, 16 and several rides throughout with regional members. VBA Member #652 HOG Member #3935417 |
|
11-14-2009, 05:24 PM | #8 | |
Sr. Member
Join Date: Jul 2007
Location: Chesapeake, Ohio
Posts: 1,537
|
How do I Remove or Cover This?
Where'd you find the Nomad emblem? I'd like to have one of those myself.
Quote:
__________________
|
|
|
11-14-2009, 06:55 PM | #9 |
Member
Join Date: Jul 2009
Posts: 358
|
How do I Remove or Cover This?
if you can get a corner up, you might try a thin monofiliment fishing line and saw it back and forth behind the emblem
|
|
11-14-2009, 09:02 PM | #10 |
Member
Join Date: Nov 2008
Posts: 374
|
How do I Remove or Cover This?
Where'd you find the Nomad emblem? I'd like to have one of those myself.
Out of curiosity, I did a search and found this site: http://www.mrnomad.com/product.asp?p...scid=29&wf=cat
__________________
If you don't grow up by age 60, you don't have to... |
|
11-14-2009, 09:08 PM | #11 | |
Mega-Contributor
Join Date: Sep 2007
Location: Where it doesn't snow...ever!
Posts: 21,926
|
How do I Remove or Cover This?
Quote:
__________________
Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08|Custer '09|Cortez '10|Crescent City '11|Kanab '12|Antlers '12|Estes Park '13|Antlers '13|Orofino '14|The Dalles '17 |
|
|
11-15-2009, 03:57 AM | #12 |
Sr. Contributor
|
How do I Remove or Cover This?
I would definitely use a source of heat and then try some very thin monofilament line to gently slide back and forth until I had it removed. I would then use alcohol to get the remainder of the glue stuff off. Just be careful.
__________________
Gene Cross, Jr. Boaz, Alabama KawaNOW/VBA #1181 |
|
11-15-2009, 04:46 AM | #13 |
Top Contributor
|
How do I Remove or Cover This?
I found mine on eBay "motors". I typed in "script". I found a couple that were the size I was looking for. The first one and really the one I wanted most was sold from under me after I won the bid. I found this one shortly after.
http://motors.shop.ebay.com/__?_from...script&_sacat= here's one here. http://cgi.ebay.com/ebaymotors/NOS-C...item2a027a9e0c
__________________
Nomad'a What ! "rickyboy" Richard Cole Canada West Region 108 Mile Ranch, British Columbia Canada Vulcan Bagger Assoc. #00722 Black 2006 Nomad https://cdn2.iconfinder.com/data/ico...Book_32x32.png |
|
11-15-2009, 06:28 AM | #14 |
Sr. Member
Join Date: Jan 2008
Location: Cartersville, Georgia
Posts: 4,838
|
How do I Remove or Cover This?
I got mine off e-bay also (about 3 years ago). I don't know if you would be able to use something to slide under it to "saw" through the glue (but the "heat" probably would be of help). It is recessed pretty deep in the fixture. It is just a thin, stamped piece of aluminum, and no matter how careful you are, your going to bend it up some. I used a small flathead screw driver to get it started. Make sure you put something between the screwdriver and the ridge you'll be prying against so you won't dent it, it's pretty soft plastic. After you get one end started, take a thin flexible putty knife, pull the emblem with one hand, and push the putty knife through the glue with the other hand. After you get it out, lay it on something flat (I used a section of 2 X4), get something to use like a rolling pin, and just roll it back nice and flat. Now you have your template. If your going to remove the tail lights (to repaint the trunk, etc) you'll have to remove this emblem, because the mounting screws are under it.
__________________
Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 |
|
11-15-2009, 08:00 PM | #15 |
Member
Join Date: Sep 2008
Location: Shreveport, LA
Posts: 144
|
How do I Remove or Cover This?
Try dental floss. It has worked a time or two for me, and you don't need much of a space to wiggle it under to get started.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Remove engine or not??? | koolaid | 1500 & 1600 Nomad | 9 | 11-18-2010 08:33 PM |
Can't Remove Windshield | billyboy | 1500 & 1600 Nomad | 32 | 03-01-2010 10:13 AM |
Had to remove V&H exhaust | meat | 1500 & 1600 Nomad | 44 | 09-06-2009 07:45 AM |
Commuter cover options: half cover/awning? | cantridenuf | Vulcan Nomad/Vaquero/Voyager | 12 | 05-09-2009 09:37 AM |
Half cover / travel cover for the Nomad | nighthawk700 | Vulcan Nomad/Vaquero/Voyager | 17 | 04-14-2009 04:42 PM |