Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > Instructions, Tutorials, Part Info, Recal Info, etc. > Mechanical

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-17-2012, 08:25 PM   #1
ringadingh   ringadingh is offline
 
ringadingh's Avatar
 
Join Date: Aug 2007
Location: Newmarket Ontario Canada
Posts: 35,387
Judges clutch washers

If you want to try to make your own washers, here are the specs. I made then from a snowmobile driven clutch shim, it was already very close to the size required. I had to file out the center hole a little and sand it a little thinner. These shims come in different thicknesses,and any snowmobile or ATV dealer should have them.

1 pc 2.540 OD X 1.790 ID x .0365 thickness
1 pc 2.540 OD X 1.890 ID x .0365 thickness
__________________

2002 Nomad aka Bountyhunter
VBA #27
VROC #18951



Login or Register to Remove Ads
 
Reply With Quote
Reply




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.