Cup Holders

redeye · 02-10-2008, 03:45 PM

I've had the bike almost two months now & need to start adding some bling. Can someone point me in the direction of some KEWL cup holders? I have to start with the important stuff first. -Rich

**ringadingh** · 02-10-2008, 09:20 PM

J&P Cycle carry all kinds of stuff like that, as well as most HD dealers, there are some that I like that mount on the rear crash bars for the passenger.

bobzinger · 02-10-2008, 10:58 PM

If you're looking for what works...here's what I use. It's just a bicycle water bottle cage I bolted on my mirror mount. It's not real Kewl looking, but it's very functional.

mrfuni · 02-11-2008, 06:25 AM

Just posted in the general area and then I read your post.
Lay a water bottle between the handle bar and windshield. Stays nice as long as there is some water to give it a little weight. (Empty water bottles can be refilled with the beverage of your choice). Enjoy the bling, that's the fun part of ownership.
Joe

watchman · 02-11-2008, 09:05 AM

I agree with Zinger. The bicycle water bottle holder works great. Close at hand for easy use. When I had the pull back risers I used to put the water bottle between them and windshield.

redeye · 02-11-2008, 12:37 PM

Thank you all. After I posted this I went to Gadget's page & saw the bike water bottle thing there. Your picture is much clearer than the one on Gadgets page BOB. Easier to understand. I'm going to check & see if I can get one in chrome for the bling factor. -Rich

beezer · 02-11-2008, 09:05 PM

$4-5 @ Walmart

bobzinger · 02-11-2008, 10:26 PM

Good water bottle cage mount

http://www.velo-orange.com/vohatowaboca.html

dogdoc · 02-13-2008, 09:26 AM

the only thing that worries me about bicycle chrome cup holders are they will rust pretty fast as all bicycle stuff does. if you could find an aluminum one that would work well.

redeye · 02-13-2008, 02:04 PM

Quote:

the only thing that worries me about bicycle chrome cup holders are they will rust pretty fast as all bicycle stuff does. if you could find an aluminum one that would work well.

Now I need a chrome aluminum bike bottle holder.

Hey BOB, what is that black post on your handle bars, just inside of your master cylinder? It looks like some sort of radio antenna.

bobzinger · 02-13-2008, 06:24 PM

Most bicycle water cages are anodized aluminum. Mine is chromed aluminum.

That post is for a Panduit camera mount. See my complete mount on Gadgets page. http://www.gadgetjq.com/cammount.htm

02-18-2008, 04:38 PM

I've been using this one....

cactusjack · 02-22-2008, 10:14 AM

Personally, I'm not one to mount a bicycle water bottle holder on my bike. These are nice - http://www.kruzerkaddy.net/ I saw one in a local shop the other day and they look really good.

misunderstood · 02-22-2008, 02:00 PM

Here's the cup holder I have and love it.

http://kruzerproducts.com/_wsn/page4.html

audiogooroo · 02-22-2008, 02:08 PM

I'll admit the chrome looks better.

02-10-2008, 03:45 PM	#1
redeye Advanced Member Join Date: Dec 2007 Location: Rocklin California Posts: 777	Cup Holders I've had the bike almost two months now & need to start adding some bling. Can someone point me in the direction of some KEWL cup holders? I have to start with the important stuff first. -Rich Login or Register to Remove Ads
	0

02-10-2008, 09:20 PM	#2
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Cup Holders J&P Cycle carry all kinds of stuff like that, as well as most HD dealers, there are some that I like that mount on the rear crash bars for the passenger. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

02-10-2008, 10:58 PM	#3
bobzinger Sr. Member Join Date: Sep 2007 Location: Livermore CA Posts: 1,334	Cup Holders If you're looking for what works...here's what I use. It's just a bicycle water bottle cage I bolted on my mirror mount. It's not real Kewl looking, but it's very functional. __________________ Life is Good! Eternal Life is better!
	0

02-11-2008, 06:25 AM	#4
mrfuni Sr. Member Join Date: Oct 2007 Location: Naples Florida Posts: 1,301	Cup Holders Just posted in the general area and then I read your post. Lay a water bottle between the handle bar and windshield. Stays nice as long as there is some water to give it a little weight. (Empty water bottles can be refilled with the beverage of your choice). Enjoy the bling, that's the fun part of ownership. Joe
	0

02-11-2008, 09:05 AM	#5
watchman Sr. Member Join Date: Jan 2008 Location: Macon, Missouri Posts: 1,175	Cup Holders I agree with Zinger. The bicycle water bottle holder works great. Close at hand for easy use. When I had the pull back risers I used to put the water bottle between them and windshield. Login or Register to Remove Ads
	0

02-11-2008, 12:37 PM	#6
redeye Advanced Member Join Date: Dec 2007 Location: Rocklin California Posts: 777	Cup Holders Thank you all. After I posted this I went to Gadget's page & saw the bike water bottle thing there. Your picture is much clearer than the one on Gadgets page BOB. Easier to understand. I'm going to check & see if I can get one in chrome for the bling factor. -Rich
	0

02-11-2008, 09:05 PM	#7
beezer Top Contributor Join Date: Aug 2007 Location: The VooDoo Lounge Posts: 5,779	Cup Holders $4-5 @ Walmart __________________ 2012 FLHTK
	0

02-11-2008, 10:26 PM	#8
bobzinger Sr. Member Join Date: Sep 2007 Location: Livermore CA Posts: 1,334	Cup Holders Good water bottle cage mount http://www.velo-orange.com/vohatowaboca.html __________________ Life is Good! Eternal Life is better!
	0

02-13-2008, 09:26 AM	#9
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	Cup Holders the only thing that worries me about bicycle chrome cup holders are they will rust pretty fast as all bicycle stuff does. if you could find an aluminum one that would work well.
	0

02-13-2008, 06:24 PM	#11
bobzinger Sr. Member Join Date: Sep 2007 Location: Livermore CA Posts: 1,334	Cup Holders Most bicycle water cages are anodized aluminum. Mine is chromed aluminum. That post is for a Panduit camera mount. See my complete mount on Gadgets page. http://www.gadgetjq.com/cammount.htm __________________ Life is Good! Eternal Life is better!
	0

02-18-2008, 04:38 PM	#12
Guest Posts: n/a	Cup Holders I've been using this one....
	0

02-22-2008, 10:14 AM	#13
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	Cup Holders Personally, I'm not one to mount a bicycle water bottle holder on my bike. These are nice - http://www.kruzerkaddy.net/ I saw one in a local shop the other day and they look really good. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17
	0

02-22-2008, 02:00 PM	#14
misunderstood Sr. Member Join Date: Oct 2008 Location: Knoxville,TN Posts: 1,845	Cup Holders Here's the cup holder I have and love it. http://kruzerproducts.com/_wsn/page4.html
	0

02-22-2008, 02:08 PM	#15
audiogooroo Sr. Member Join Date: Oct 2007 Location: Colorado Springs, Colorado/Las Vegas, NV Posts: 3,390	Cup Holders I'll admit the chrome looks better. __________________ Audiogooroo - Daryl Porter Colorado Springs, CO VBA #248 VROC #17261 1999 Grn/Grn Nomad
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flag holders	bugman	Vulcan Nomad/Vaquero/Voyager	3	05-07-2010 04:22 PM
Cup Holders/ SOLD	chainsaw	Parts & Accessories	6	03-18-2009 02:49 PM
cup holder	dantama	1500 & 1600 Nomad	9	06-15-2008 06:28 AM
No Cup?	Idaho	Lighter Side/Jokes	16	03-26-2008 07:25 PM
Saddlebag coffee cup holder	socwkbiker	Vulcan Nomad/Vaquero/Voyager	7	07-26-2007 11:09 AM