What size wrench

02-09-2008, 09:51 PM

What do I need to take off the windshield, looks like 2 sizes. Maybe a star head, not sure??

02-09-2008, 10:06 PM

If I remember right its just an allen wrench. I used the guess and check method to see which one fit

02-09-2008, 10:15 PM

Tried that an almost got one stripped, thunk it might be a special size!!

damark115 · 02-09-2008, 10:35 PM

Sounds obvious, but it is metric.

mercianbike · 02-10-2008, 07:44 AM

Quote:

What do I need to take off the windshield, looks like 2 sizes. Maybe a star head, not sure??

Use a 5mm (metric) allen wrench for the windshield. Two bolts on each side, all the same size. I have a set of these metric size wrenches that I find useful.

dogdoc · 02-10-2008, 09:40 AM

mericanbike knows what hes says. it is metric for sure. you can get an sae in there but will strip the soft allen heads. seat the wrench in all the way before turning it and dont tighten very tight. Those bolts are $3 a piece and you dont want too many to order. :-)

beezer · 02-10-2008, 11:28 AM

+1 :)

**Top Cat** · 02-10-2008, 12:01 PM

They are also tight as he11 like every other bolt on the Nomad.
I striped out the hole on one of mine , even using the correct size metric wrench, and took my Dremel Tool and cut a slot in it

Now it is a regular screwdriver bolt.

dogdoc · 02-12-2008, 09:33 PM

+1

02-09-2008, 09:51 PM	#1
Guest Posts: n/a	What size wrench What do I need to take off the windshield, looks like 2 sizes. Maybe a star head, not sure?? Login or Register to Remove Ads
	0

02-09-2008, 10:06 PM	#2
Guest Posts: n/a	What size wrench If I remember right its just an allen wrench. I used the guess and check method to see which one fit
	0

02-09-2008, 10:15 PM	#3
Guest Posts: n/a	What size wrench Tried that an almost got one stripped, thunk it might be a special size!!
	0

02-09-2008, 10:35 PM	#4
damark115 Member Join Date: Jan 2008 Location: Methuen MA Posts: 349	What size wrench Sounds obvious, but it is metric.
	0

02-10-2008, 09:40 AM	#6
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	What size wrench mericanbike knows what hes says. it is metric for sure. you can get an sae in there but will strip the soft allen heads. seat the wrench in all the way before turning it and dont tighten very tight. Those bolts are $3 a piece and you dont want too many to order. :-)
	0

02-10-2008, 11:28 AM	#7
beezer Top Contributor Join Date: Aug 2007 Location: The VooDoo Lounge Posts: 5,779	What size wrench +1 :) __________________ 2012 FLHTK
	0

02-10-2008, 12:01 PM	#8
Top Cat Join Date: Jul 2007 Location: Peoples Republic of New York State Posts: 15,154	What size wrench They are also tight as he11 like every other bolt on the Nomad. I striped out the hole on one of mine , even using the correct size metric wrench, and took my Dremel Tool and cut a slot in it Now it is a regular screwdriver bolt. __________________ Tim "TC" Conley VBA #9 2011 Victory Kingpin mine 2013 Victory Boardwalk -hers [LEFT][COLOR=#000000] [SIZE=4]
	0

02-12-2008, 09:33 PM	#9
dogdoc Top Contributor Join Date: Jul 2007 Posts: 5,263	What size wrench +1
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using a torque wrench.	Dave	Off-Topic	17	07-11-2011 12:55 PM
Torque wrench recommendation?	darryldale	Off-Topic	8	04-09-2010 01:39 PM
Turned a wrench on a Harley	cactusjack	Off-Topic	8	02-05-2010 10:53 PM
Any Suggestions??? Torque wrench	flash105	1500 & 1600 Nomad	14	10-08-2009 02:21 PM
NOT a Wrench Party	jmilucky	SouthEast Group	42	09-30-2009 07:14 AM