Baron Custom Accessories - BA-7309-00B

vtprairie · 10-01-2018, 07:05 PM

SOLD

So I have been looking for new handlebars for my Voyager and the 300 plus for some was a bit out of my range. So I found these bars for much less but I didn't read the description correctly. They don't really raise them. So some things change and I have read good things about them but not what I wanted. Pic is of the bars when I took it out of the box I didn't mount them. I can ship to Canada if you want to pay the extra shipping.

150 shipped OBO if you use Paypal you can send it to me as a gift I am not wanting to pay the fee please.

vtprairie · 10-09-2018, 01:28 PM

Some buddy must want these bars make me an offer

**smokier** · 10-11-2018, 08:30 PM

If you could take a picture of them next to the stock bars. Have a pretty assistant operate the camera whilst you hold the bars...
Give a guy a chance to judge the difference in curves...

(Seriously, would need to see how the bars might be different than stock to be interested...)
Smokier

vtprairie · 10-12-2018, 09:21 AM

Will do this weekend

vtprairie · 10-14-2018, 07:59 PM

The Barons specs
33" Wide, 8" Tall, 12" Pullback
2009 Voyager that I have are 8" 35" 15"
Vaquero 10" 33-1/2 15"

I wanted bars that raise my arms I bought these without fully checking the specs. Just trying to get some of my money back.

**plumber63** · 10-14-2018, 09:10 PM

I thought the 2009 Voyager had 1" diameter bars.

ldhthept · 10-15-2018, 10:39 AM

I have an 06 Nomad that I bought 3 inch risers from Chucksters which helped a little but still not right. I then loosened my bars and rolled them forward to raise the grips almost as high as they would go but still behind my fairing. Much better posture and with back rest works great. Idk if the Voyager bars are attached the same way but your bars look wayyy too low.

vtprairie · 10-15-2018, 10:59 AM

Quote:

Originally Posted by plumber63

I thought the 2009 Voyager had 1" diameter bars.

They are 1 inch another misread on my part for my Voyager

vtprairie · 10-15-2018, 11:00 AM

Quote:

Originally Posted by ldhthept

I have an 06 Nomad that I bought 3 inch risers from Chucksters which helped a little but still not right. I then loosened my bars and rolled them forward to raise the grips almost as high as they would go but still behind my fairing. Much better posture and with back rest works great. Idk if the Voyager bars are attached the same way but your bars look wayyy too low.

The fairing is in the way to move the bars upward. I thought of trying that

**MAS Tequila** · 10-15-2018, 12:30 PM

Get a set of 12" apes.

I put a set on my 1500.

What a difference they made.

Lumberjack · 10-15-2018, 12:48 PM

IMO if you use risers (with pull back) like most of us do it will give you more clearance of handlebars from hitting the inside fairing.

vtprairie · 10-16-2018, 08:51 AM

Quote:

Originally Posted by MAS Tequila

Get a set of 12" apes.

I put a set on my 1500.

What a difference they made.

That was my plan I saw these bars thought they were but didn't read the description enough jumped the gun and now have a set of bars I am not going to use. Hopefully someone on here can use them.

vtprairie · 10-16-2018, 08:53 AM

Someone make me an offer I can't refuse. I don't want to ebay them and give them bums money lol

vtprairie · 11-12-2018, 11:08 AM

130 shipped

Helmet012001 · 05-09-2019, 01:52 PM

Fit a 2011 Vaquero?

10-09-2018, 01:28 PM	#2
vtprairie Member Join Date: May 2017 Location: Swanton Vt Posts: 68	Some buddy must want these bars make me an offer __________________ 2009 Voyager Cobra slip-ons Thunder BAK Ivanized
	0

10-12-2018, 09:21 AM	#4
vtprairie Member Join Date: May 2017 Location: Swanton Vt Posts: 68	Will do this weekend __________________ 2009 Voyager Cobra slip-ons Thunder BAK Ivanized
	0

10-14-2018, 09:10 PM	#6
plumber63 Join Date: Apr 2012 Location: NE Indiana Posts: 985	I thought the 2009 Voyager had 1" diameter bars. __________________ Troy Donat VBA #02401 2015 Voyager 2006 1600 Nomad black(sold) 2016 Salem, Antlers, 2017 Eureka Springs, Lake George, Antlers 2018 Custer NR, Antlers
	0

10-15-2018, 12:30 PM	#10
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	Get a set of 12" apes. I put a set on my 1500. What a difference they made. __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936
	0

10-16-2018, 08:53 AM	#13
vtprairie Member Join Date: May 2017 Location: Swanton Vt Posts: 68	Someone make me an offer I can't refuse. I don't want to ebay them and give them bums money lol __________________ 2009 Voyager Cobra slip-ons Thunder BAK Ivanized
	0

10-11-2018, 08:30 PM	#3
smokier Join Date: May 2015 Location: DBQ Iowa Posts: 1,807	If you could take a picture of them next to the stock bars. Have a pretty assistant operate the camera whilst you hold the bars... Give a guy a chance to judge the difference in curves... (Seriously, would need to see how the bars might be different than stock to be interested...) Smokier
	0

10-15-2018, 10:39 AM	#7
ldhthept Sr. Member Join Date: Mar 2010 Location: Tallahassee FL Posts: 1,035	I have an 06 Nomad that I bought 3 inch risers from Chucksters which helped a little but still not right. I then loosened my bars and rolled them forward to raise the grips almost as high as they would go but still behind my fairing. Much better posture and with back rest works great. Idk if the Voyager bars are attached the same way but your bars look wayyy too low.
	0

10-15-2018, 12:48 PM	#11
Lumberjack Advanced Member Join Date: Sep 2015 Posts: 542	IMO if you use risers (with pull back) like most of us do it will give you more clearance of handlebars from hitting the inside fairing.
	0

11-12-2018, 11:08 AM	#14
vtprairie Member Join Date: May 2017 Location: Swanton Vt Posts: 68	130 shipped __________________ 2009 Voyager Cobra slip-ons Thunder BAK Ivanized
	0

05-09-2019, 01:52 PM	#15
Helmet012001 Jr. Member Join Date: Jun 2018 Location: Chippewa falls wi Posts: 26	Fit a 2011 Vaquero? __________________ 2011 vaquero black.
	0