|
|
09-27-2014, 06:54 PM
|
#16 |
|
Jr. Member
Join Date: Jun 2014
Location: Hudson, Quebec, Canada
Posts: 8
|
UPDATE
Do NOT use Loctite near any ABS component. Guys i figured out what hapenned. After checking carefully the trunk i discovered another spider of crack around one of the hinge. The damage was cause by Loctite on the bolt that are going through the ABS trunk. I was tired of putting back the screw every few weeks had put Loctite on the bolt. Everywhere It has been in contact with the ABS i can see cracks appearing. That was 3 months ago so it takes time for the damage to show up. If you have ever had the bad idea of putting loctite near ABS component, i suggest you remove and clean the parts ASAP. I will post the pictures soon Login or Register to Remove Ads |
|
|
09-27-2014, 07:11 PM
|
#17 |
|
Jr. Member
Join Date: Jun 2014
Location: Hudson, Quebec, Canada
Posts: 8
|
|
|
|
|
09-27-2014, 07:15 PM
|
#18 |
|
Jr. Member
Join Date: Jun 2014
Location: Hudson, Quebec, Canada
Posts: 8
|
As you can see from the pictures above, the damage is much less than around the antenna hole. Incatched it earlier but it will still require extensive repair.
|
|
|
|
09-27-2014, 07:23 PM
|
#19 |
|
Sr. Member
Join Date: Mar 2012
Location: Orleans, ON, Canada
Posts: 1,162
|
Good to know, thanks for the update. I also just googled it and it will indeed eat ABS and is not recommended for use around or with it.
__________________
Smokey Capt(retd) Canadian Forces National President CVFR (Canadian Veteran Freedom Riders) 2010 VN1700 Voyager, ABS www.cvfr.ca VBA #02220
Last edited by smokey; 09-27-2014 at 08:07 PM.
|
|
|
Linear Mode
