"Ultimate V&H Baffle"- Drawing Up-Date

VulcanE · 04-01-2009, 07:01 AM

Kris (Netnorske) had gotten a drawing from me and had a set of the baffles made. He got back with me to let me know that I had dimensioned the location for the 1/4" rod in the wrong place. Where I had it dimensioned, there wouldn't be enough wall thickness to put the set screw to hold the rod in. He was right, so here is a corrected drawing, so If you are going to have a set made, use this drawing instead of the other one.

nomad561 · 04-01-2009, 07:24 AM

Thanks for the correction info.

04-01-2009, 07:01 AM	#1
VulcanE Sr. Member Join Date: Jan 2008 Location: Cartersville, Georgia Posts: 4,838	"Ultimate V&H Baffle"- Drawing Up-Date Kris (Netnorske) had gotten a drawing from me and had a set of the baffles made. He got back with me to let me know that I had dimensioned the location for the 1/4" rod in the wrong place. Where I had it dimensioned, there wouldn't be enough wall thickness to put the set screw to hold the rod in. He was right, so here is a corrected drawing, so If you are going to have a set made, use this drawing instead of the other one. __________________ Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381 Login or Register to Remove Ads
	0

04-01-2009, 07:24 AM	#2
nomad561 Sr. Member Join Date: Jul 2008 Location: Pasco , Wa Posts: 1,445	"Ultimate V&H Baffle"- Drawing Up-Date Thanks for the correction info.
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ultimate Baffle Drawing	ringadingh	Mechanical	0	06-22-2010 10:20 PM
"Ultimate V&H Baffle"- Confirmed...!!	Netnorske	Vulcan Nomad/Vaquero/Voyager	94	04-25-2009 10:17 PM
"ultimate" baffle material	stewdogg	1500 & 1600 Nomad	23	04-25-2009 06:51 PM
The "Ultimate" V&H baffle (w/drawing)	dkdixie	1500 & 1600 Nomad	46	04-19-2009 08:03 PM
"BLIND DATE"	jmorrow	Lighter Side/Jokes	2	09-30-2008 08:45 PM