Operation PlastiDip

Duff · 07-13-2014, 09:37 PM

Getting rid of some of the ugly chrome on my Vaquero with this gem of a product!

Duff · 07-13-2014, 09:39 PM

The headlight bezel I did in 6 lightly dusted coats so it would come out more gritty looking to match the forks.

Duff · 07-13-2014, 09:43 PM

I also intend to do the tail light bezel (tried once, but when I peeled off the masking some of the PlastiDip came with it) and the saddlebag latches. Haven't decided yet if I'm going to do the turn signal stems and pods. I may do the pods and leave the stems chrome to make it pop a little bit.

The Black Knight · 07-14-2014, 05:29 PM

Wow!

Owtlawryda63 · 07-14-2014, 10:48 PM

Nice! Did you take the pieces off before you sprayed them?

Duff · 07-14-2014, 11:02 PM

The tail light bezel is the only thing I haven't taken off yet, and I screwed it up. Didn't want to screw with taking it off, but looks like I'm going to have to, to get it perfect.

Working on the saddlebag handles right now. Fearing putting these bastards back on.
ImageUploadedByTapatalk1405393312.005859.jpg

Duff · 07-14-2014, 11:05 PM

Side note, didn't realize these were actually aluminum instead of plastic

Duff · 07-15-2014, 12:36 AM

Can't wait to get it in the sun to get a better pic! Still not looking forward to getting them back on lol

ImageUploadedByTapatalk1405398958.829066.jpg

id-man · 07-15-2014, 11:02 AM

Hmm, it looks good and I have some right in my garage. I never would have thought it would be tough enough to use on your saddlebag handles though. It makers me wonder if it would work on my lower forks without removing them first? With the bugs and possible stones that can pelt that area has anyone experienced how that might hold up?

Duff · 07-15-2014, 09:12 PM

Saddlebag handles are done and back on the bike. Man handled the hell out of the first one trying to figure out how to get the springs back in it and started a peel on the coat. May have to redo that one, but I figured out how to easily get them remounted so it should go well if I have to redo.
Some more views of the headlight bezel and the tag light cover also.
ImageUploadedByTapatalk1405473096.279222.jpg
ImageUploadedByTapatalk1405473106.961408.jpg
ImageUploadedByTapatalk1405473129.431300.jpg
ImageUploadedByTapatalk1405473139.061957.jpg
ImageUploadedByTapatalk1405473148.796071.jpg

Duff · 07-15-2014, 09:13 PM

Tail
ImageUploadedByTapatalk1405473229.144850.jpg

**Jared** · 07-16-2014, 05:33 AM

Looks great!

Loafer · 07-16-2014, 05:50 AM

Looks like you did a great job, congrats.

Duff · 07-18-2014, 09:15 AM

Been meaning to do this for a long time. Put the stock windshield back on, on top of the 12". Got rid of that ugly chrome support strip and brings back the original sleek look of the front end!
ImageUploadedByTapatalk1405689300.193926.jpg

**jlreeves** · 07-18-2014, 12:19 PM

I may just have to try some of these projects this coming winter. This looks really good.

07-13-2014, 09:43 PM	#3
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	I also intend to do the tail light bezel (tried once, but when I peeled off the masking some of the PlastiDip came with it) and the saddlebag latches. Haven't decided yet if I'm going to do the turn signal stems and pods. I may do the pods and leave the stems chrome to make it pop a little bit. __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-14-2014, 10:48 PM	#5
Owtlawryda63 Jr. Member Join Date: Jul 2014 Location: MoCo, MD Posts: 2	Nice! Did you take the pieces off before you sprayed them? Login or Register to Remove Ads
	0

07-14-2014, 11:02 PM	#6
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	The tail light bezel is the only thing I haven't taken off yet, and I screwed it up. Didn't want to screw with taking it off, but looks like I'm going to have to, to get it perfect. Working on the saddlebag handles right now. Fearing putting these bastards back on. ImageUploadedByTapatalk1405393312.005859.jpg __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-14-2014, 11:05 PM	#7
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	Side note, didn't realize these were actually aluminum instead of plastic __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-15-2014, 12:36 AM	#8
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	Operation PlastiDip Can't wait to get it in the sun to get a better pic! Still not looking forward to getting them back on lol ImageUploadedByTapatalk1405398958.829066.jpg __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-14-2014, 05:29 PM	#4
The Black Knight Top Contributor Join Date: Nov 2013 Location: Italy Posts: 6,020	Wow!
	0

07-15-2014, 11:02 AM	#9
id-man Advanced Member Join Date: May 2013 Location: Cape Cod Massachusetts Posts: 822	Hmm, it looks good and I have some right in my garage. I never would have thought it would be tough enough to use on your saddlebag handles though. It makers me wonder if it would work on my lower forks without removing them first? With the bugs and possible stones that can pelt that area has anyone experienced how that might hold up? __________________ 2004 Nomad 1500FI - weeeeeeeeee!
	0

07-15-2014, 09:12 PM	#10
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	Saddlebag handles are done and back on the bike. Man handled the hell out of the first one trying to figure out how to get the springs back in it and started a peel on the coat. May have to redo that one, but I figured out how to easily get them remounted so it should go well if I have to redo. Some more views of the headlight bezel and the tag light cover also. ImageUploadedByTapatalk1405473096.279222.jpg ImageUploadedByTapatalk1405473106.961408.jpg ImageUploadedByTapatalk1405473129.431300.jpg ImageUploadedByTapatalk1405473139.061957.jpg ImageUploadedByTapatalk1405473148.796071.jpg __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-15-2014, 09:13 PM	#11
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	Tail ImageUploadedByTapatalk1405473229.144850.jpg __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-16-2014, 05:33 AM	#12
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	Looks great! __________________ Jared VBA #1051 (Former President)
	0

07-16-2014, 05:50 AM	#13
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Looks like you did a great job, congrats. __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

07-18-2014, 09:15 AM	#14
Duff Member Join Date: Apr 2012 Location: Oklahoma City Posts: 200	Been meaning to do this for a long time. Put the stock windshield back on, on top of the 12". Got rid of that ugly chrome support strip and brings back the original sleek look of the front end! ImageUploadedByTapatalk1405689300.193926.jpg __________________ Duff - 2011 Vaquero Bethany, OK VBA# 02099 Downed Bikers Association#1063
	0

07-18-2014, 12:19 PM	#15
jlreeves Join Date: Oct 2010 Location: Roswell, GA Posts: 888	I may just have to try some of these projects this coming winter. This looks really good. __________________ 2008 Nomad 1600 Black/Red _________________________________________ VulcanBagger #01711, VRA/GA VRA, SCRC, VROC #29671, AMA #1085989, Red Knights MC GA-18 Pres, PGR _________________________________________
	0