90 Deg Valve...

mr500 · 10-28-2019, 02:41 PM

Well I ordered the new Mic II for the rear since my junk OEM is well just that JUNK... So while its up...

I want to add in a 90 Deg valve on the front. I am getting so many different sizes for the hole, and thread depths...

Anyone replace on the 1700 rim and if so any links? I have the 90 on rear, I want one on the front as well.

DragonLady58 · 10-28-2019, 03:07 PM

Well, if you ever or have thought about it, and were going to later use a TPMS, use a T valvestem....will save you alot of headaches later down the road....
Even if you decide to not use the TPMS, you can always cap it off....

I like having the 2 valvestems, if one shrader valve screws up, you can always fall back on the other one....

mr500 · 10-28-2019, 03:35 PM

damn that thing is small. You have a link to the company that sells that. And yes I have thought about the TPMS

DragonLady58 · 10-28-2019, 05:43 PM

https://cyclemax.com/inc/sdetail/chr...ms/4102/261164
https://www.imperialsupplies.com/item/0373120
you can also get them from fobo....

mr500 · 10-29-2019, 07:21 AM

Nice. I like the cycle max product.

Thanks so much for the links. I can put these on than be all set up for when I decide on a TPM!!!

mbarr10 · 10-29-2019, 07:34 PM

Quote:

Originally Posted by mr500

Well I ordered the new Mic II for the rear since my junk OEM is well just that JUNK... So while its up...

I want to add in a 90 Deg valve on the front. I am getting so many different sizes for the hole, and thread depths...

Anyone replace on the 1700 rim and if so any links? I have the 90 on rear, I want one on the front as well.

I can not find the one I ordered but it does not have the screws on the rim like the back rim, so I need to hold the back of it while checking/filling. Still worth it to me. It was not a screw on extension but rubber on the end that goes into the rim.

alwhite00 · 10-30-2019, 10:56 AM

Would the goldwing ones work on a 1500?

DragonLady58 · 10-31-2019, 05:16 PM

It should, but even if it doesn't, any good mechanic worth his or her salt can fit it.... Or at least they can tell you why they can't. Usually its just a drill, ream, and deburr to get a stem to fit....They are mostly universal....theres very few rims that are a speciality thing to where they'll only take a specific stem....
The only factor is if theres a recess that the inner seal has to fit into....and if it allows the stems inner seal to seal off correctly....

10-28-2019, 02:41 PM	#1
mr500 Member Join Date: Nov 2014 Location: Auburn Al Posts: 247	90 Deg Valve... Well I ordered the new Mic II for the rear since my junk OEM is well just that JUNK... So while its up... I want to add in a 90 Deg valve on the front. I am getting so many different sizes for the hole, and thread depths... Anyone replace on the 1700 rim and if so any links? I have the 90 on rear, I want one on the front as well. __________________ 2019 1700 Voyager VBA #02943 Login or Register to Remove Ads
	0

10-28-2019, 03:07 PM	#2
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	Well, if you ever or have thought about it, and were going to later use a TPMS, use a T valvestem....will save you alot of headaches later down the road.... Even if you decide to not use the TPMS, you can always cap it off.... I like having the 2 valvestems, if one shrader valve screws up, you can always fall back on the other one.... __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Last edited by DragonLady58; 10-28-2019 at 03:21 PM.
	0

10-28-2019, 03:35 PM	#3
mr500 Member Join Date: Nov 2014 Location: Auburn Al Posts: 247	damn that thing is small. You have a link to the company that sells that. And yes I have thought about the TPMS __________________ 2019 1700 Voyager VBA #02943
	0

10-28-2019, 05:43 PM	#4
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	https://cyclemax.com/inc/sdetail/chr...ms/4102/261164 https://www.imperialsupplies.com/item/0373120 you can also get them from fobo.... __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Last edited by DragonLady58; 10-28-2019 at 05:56 PM.
	0

10-29-2019, 07:21 AM	#5
mr500 Member Join Date: Nov 2014 Location: Auburn Al Posts: 247	Nice. I like the cycle max product. Thanks so much for the links. I can put these on than be all set up for when I decide on a TPM!!! __________________ 2019 1700 Voyager VBA #02943 Login or Register to Remove Ads
	0

10-30-2019, 10:56 AM	#7
alwhite00 Advanced Member Join Date: Aug 2016 Posts: 539	Would the goldwing ones work on a 1500? __________________ Tighten it till it strips and back it off a quarter turn.
	0

10-31-2019, 05:16 PM	#8
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	It should, but even if it doesn't, any good mechanic worth his or her salt can fit it.... Or at least they can tell you why they can't. Usually its just a drill, ream, and deburr to get a stem to fit....They are mostly universal....theres very few rims that are a speciality thing to where they'll only take a specific stem.... The only factor is if theres a recess that the inner seal has to fit into....and if it allows the stems inner seal to seal off correctly.... __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Last edited by DragonLady58; 10-31-2019 at 05:22 PM.
	0