Register FAQ Upgrade Membership Community Calendar Today's Posts Search
Go Back   Vulcan Bagger Forums > Technical :: Maintenance :: Performance > 1700 Nomad, Vaquero & Voyager

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-30-2023, 10:01 AM   #1
William H.   William H. is offline
Jr. Member
 
Join Date: May 2023
Posts: 3
Rust in Vaquero Fork Cover

There is rust inside the top of the fork cover... Anyone else ever seen this? How big of a problem is it! In the photo I had sprayed WD40 inside the cover, so it's hard to see the rust, but it indicates where it is...Front Left Fork 2.jpg



Login or Register to Remove Ads
 
Reply With Quote
Old 05-30-2023, 08:50 PM   #2
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,927
I presume you mean there is rust on the fork leg under the part below ?

COVER-FORK
44033-0068

If so I would clean it up as best as you can and coat it with a rust preventative. As long as there is no rust where the fork seal rides you should be good to go.
 
Reply With Quote
Old 05-30-2023, 09:34 PM   #3
William H.   William H. is offline
Jr. Member
 
Join Date: May 2023
Posts: 3
No, it is on top where the fork cover begins....
 
Reply With Quote
Old 05-31-2023, 07:31 AM   #4
redjay   redjay is offline
Top Contributor
 
Join Date: Feb 2008
Location: Ontario
Posts: 6,927
The photo appears to show the lower fork yoke. Is the rust higher than that ?
As long as the rust is not where the fork seal rides on the fork leg you are good to go.
 
Reply With Quote
Old 05-31-2023, 09:51 AM   #5
William H.   William H. is offline
Jr. Member
 
Join Date: May 2023
Posts: 3
It is the lower yoke, but the fork seal is lower down... I think the fork cover covers that up....



Login or Register to Remove Ads
 
Reply With Quote
Reply





Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.