High flow fuel pump

danb · 07-19-2023, 11:23 AM

Does anyone know the part no of the High Flow fuel pump for the 2004 1500 Nomad. I called the company today but he needed the part # off the original pump. I haven't pulled it yet as I wanted to have a new one here before I pulled it. Thanks for any help.
Dan

Mechaniac · 07-26-2023, 02:20 PM

I found an old post where a guy was cleaning his pump and found a Mitsubishi part number that cross referenced to a 1989 Galant. He went to O'Reilly's and they pulled two. One was too fat but the other was a perfect fit.

I found one fuel pump company that specializes in motorcycles where you could just ender the make model and year and they listed it, with specs. The flow was way above needed for this engine's power.

Vernon

Mechaniac · 07-26-2023, 02:21 PM

The filter is an unknown, if anyone has matched it I would like to know what they found out.

Vernon

ldhthept · 07-27-2023, 09:28 AM

Amazon?

redjay · 07-27-2023, 07:53 PM

https://www.vulcanbagger.com/forums/...ad.php?t=18656

danb · 07-28-2023, 11:25 PM

I did find a filter. I used a wix filter, I dont have the number right now but will post it tomorrow. I did find a pump on the High Flow site. I replaced the filter but have not done the pump yet. My engine would miss intermitantly, initially I thought it was water in the fuel. Iput some Heet in the gas but it didnt make any difference. I found one spark plugcap that was bad, so I decided to replace all of them, plug wires and new coils. Its running good again.
Danb

danb · 07-29-2023, 09:11 AM

The fuel filter I used was a WIX33032. I had to use a longer screw in the clamp as the filter was a little bigger in diameter. On the High Flow Fuel pump site the pump the listed as a replacement is HFP-382S-U. I haven't done anything with the pump yet. The coils I used were the Dynatek DC1-2, plug wires were Dynatek DW-200.

**plumber63** · 07-29-2023, 09:26 PM

I have a almost new pump from my 2006. I used it for 2 tanks of fuel. Didn't fix the issue I was having. So put the old one back in. This was back in 2017-18.
I would let you have it for $25 shipped. It's a quantum hfp-382s-u

ldhthept · 07-31-2023, 03:22 PM

I

07-19-2023, 11:23 AM	#1
danb Jr. Member Join Date: Apr 2019 Location: Hawarden, IA Posts: 27	High flow fuel pump Does anyone know the part no of the High Flow fuel pump for the 2004 1500 Nomad. I called the company today but he needed the part # off the original pump. I haven't pulled it yet as I wanted to have a new one here before I pulled it. Thanks for any help. Dan Login or Register to Remove Ads
	0

07-27-2023, 07:53 PM	#5
redjay Top Contributor Join Date: Feb 2008 Location: Ontario Posts: 6,927	https://www.vulcanbagger.com/forums/...ad.php?t=18656 Login or Register to Remove Ads
	1

07-26-2023, 02:20 PM	#2
Mechaniac Member Join Date: May 2022 Location: Magnolia, Texas Posts: 80	I found an old post where a guy was cleaning his pump and found a Mitsubishi part number that cross referenced to a 1989 Galant. He went to O'Reilly's and they pulled two. One was too fat but the other was a perfect fit. I found one fuel pump company that specializes in motorcycles where you could just ender the make model and year and they listed it, with specs. The flow was way above needed for this engine's power. Vernon
	0

07-26-2023, 02:21 PM	#3
Mechaniac Member Join Date: May 2022 Location: Magnolia, Texas Posts: 80	The filter is an unknown, if anyone has matched it I would like to know what they found out. Vernon
	0

07-27-2023, 09:28 AM	#4
ldhthept Sr. Member Join Date: Mar 2010 Location: Tallahassee FL Posts: 1,033	Amazon?
	0

07-28-2023, 11:25 PM	#6
danb Jr. Member Join Date: Apr 2019 Location: Hawarden, IA Posts: 27	I did find a filter. I used a wix filter, I dont have the number right now but will post it tomorrow. I did find a pump on the High Flow site. I replaced the filter but have not done the pump yet. My engine would miss intermitantly, initially I thought it was water in the fuel. Iput some Heet in the gas but it didnt make any difference. I found one spark plugcap that was bad, so I decided to replace all of them, plug wires and new coils. Its running good again. Danb
	0

07-29-2023, 09:11 AM	#7
danb Jr. Member Join Date: Apr 2019 Location: Hawarden, IA Posts: 27	The fuel filter I used was a WIX33032. I had to use a longer screw in the clamp as the filter was a little bigger in diameter. On the High Flow Fuel pump site the pump the listed as a replacement is HFP-382S-U. I haven't done anything with the pump yet. The coils I used were the Dynatek DC1-2, plug wires were Dynatek DW-200.
	0

07-31-2023, 03:22 PM	#9
ldhthept Sr. Member Join Date: Mar 2010 Location: Tallahassee FL Posts: 1,033	I
	0