|
07-18-2017, 02:02 PM | #1 |
Jr. Member
Join Date: Aug 2015
Location: Florida
Posts: 12
|
2015 Vaquero - PC-V tuning - gear select
I have 2015 Vaquero with Freedom pipes and Roaring Toyz air cleaner. we had put in a Vulcan map 2 years ago to get it running and it ran decent. I didnt want to wait for dyno so I got autotune and had bung welded in RS muff same as stock location. Worked well. For awhile. Then at lower TP and rpm would misfire when heat soaked. Next day I did a remap run and then accepted map and disconnected AT. better but it would still do that bad thing. I contacted Chris at PC and he suggested I do a gear based map. so that each gear would have its own map. Now I don't have a service manual and don't know where to find that gear select wire.
Has anyone done gear select ? I also bought the DJ POD 300 - nice add on panel to see AFR - and can do map swaps and datalog. I used to work at Roaring Toyz machine shop when we had that magazine Vaquero bike. Login or Register to Remove Ads |
|
07-18-2017, 03:01 PM | #2 |
Sr. Member
Join Date: Apr 2012
Location: West Coast, North Island, New Zealand
Posts: 1,375
|
Good luck with your quest... Most of us have dumped our fuel tuners in favor of having Ivan re-flash the ECU, and in doing that have got rid of all bad things.
__________________
Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold) |
|
08-01-2017, 11:21 PM | #3 | |
Jr. Member
Join Date: Aug 2015
Location: Florida
Posts: 12
|
I went Ivan
Quote:
after reading many forum posts and some youtubers - I did the Ivan Flash - 2 day fedex up and back send Mon and got it last Friday. So far runs very nice. I left PC-v in and set all cells to zeros - fuel and Ignition - mainly becuase I didnt want to uninstall. I know many others have done the same with no problems. |
|
|