trunk...Updated with completed pics

NyhtRyder · 09-13-2009, 08:40 AM

Have any of you made your own trunk for your Nomad?
This is going to be my winter project. I'm going to make a trunk to match the shape of style of the nomad bags. I'm going to attempt to make it look as if I have taken two Nomad bags and put them together to make a trunk. I already have a Wompus Rack. I'm still trying to decide on whether to make access to the trunk as drop down side doors like the bags or do it as a single top load door. I'd also like to use the existing OEM backrest. I'll Keep a progress report going on this as I get it started in the next month or so.

VulcanE · 09-13-2009, 09:05 AM

Sounds VERY Interesting, For ease of access though, I would suggest hinging it on the left side or front side (opens toward the handlebars) I've had both, and both have their advantages. Keep us posted, I'd like to see it.

**glwilson** · 09-13-2009, 09:41 AM

If I "see" what you are looking to do that would look great.

I see the image of trunk that looks like two bags side-by-side (only shorter in height). If that is what you are talking about... it would be similar to a custom pull-trailer I saw a guy have that he made. He also emulated the look of the saddlebags (same paint as the bike also) -- which looked really cool (I couldn't get a picture and asked him to post on this site; but he didn't).

Anyway... his trailer had the door open on the back-side toward the front, sort of like a car truck does. In other words, his hinges were along the top-side of the trailer (in your case on the top of the trunk right behind the passenger back-rest.).

By doing it that way; you would not interfere with the passenger back-rest. You could also "dress-up" the hinges so they look good from the top-end of the bike -- and you could put some-sort of cool trunk latch using a Vulcan emblem piece.

Anyway... I am sure I haven't explained this very well but if you could see what I "see", it looks really great and would be something I am sure other Nomad owners (pre-2009) would like for you to make.

So... be careful in how well you make your trunk as you'll likely be hounded to make some!! Ha! Be sure to post pics as you go.

brickguy · 09-13-2009, 09:43 AM

Interesting! i will follow your progress......Brick

p.s. Does anyone make a radiator chrome cover for a Nomad 1600? Can't fine one anywhere.

xncrman · 09-13-2009, 10:09 AM

Sounds like a good project. I settled for an Ebay trunk and painted. Look forward to pics in then future.

pirate · 09-13-2009, 10:11 AM

Good luck with your project and keep us posted!

tazfl · 09-13-2009, 12:24 PM

sounds like a great idea, if it were me i think i would make it top opening, think it would be allot easier as far as access goes. look forward to watching the progress.

NyhtRyder · 10-17-2009, 12:49 PM

Sorry about missing the progress till the next pic, but my memory card on my camera crapped out on me.

This is where I am currently. The sides will be built out like the doors of the bags.
More pics to follow as I make progress.

**jestephens** · 10-17-2009, 03:20 PM

Wow, this seems to be working well so far. Good job!

wheelie · 10-17-2009, 03:43 PM

Looking Good! Can't wait to see the finished product.

**wompus** · 10-17-2009, 03:48 PM

When you get it finished I want a couple pictures to add to my web page.
The shape is why I went with the early Yamaha trunk, it's the closest shape to the bags I've seen so far.... cept yours! ;)

NyhtRyder · 10-17-2009, 04:08 PM

Not a problem Mike.

**Jared** · 10-17-2009, 04:26 PM

Looking good! I really really like the idea! Just one question---will you be adding pads of some sort for a passenger to lean on? If so, and if the pad/backrest is vertical, what will you do with the space near the bottom of their back and the bottom front of the trunk? Will there just be a gap there?

NyhtRyder · 10-17-2009, 04:36 PM

Quote:

Originally Posted by Utah Motorcyclist

Looking good! I really really like the idea! Just one question---will you be adding pads of some sort for a passenger to lean on? If so, and if the pad/backrest is vertical, what will you do with the space near the bottom of their back and the bottom front of the trunk? Will there just be a gap there?

Yes, it will just be a gap. I'll be using the OEM pad from the OEM backrest.

bokobob · 10-18-2009, 06:53 AM

Superb workmanship...excellent design.

09-13-2009, 08:40 AM	#1
NyhtRyder Member Join Date: Jul 2009 Location: Indianapolis, Indiana Posts: 78	trunk...Updated with completed pics Have any of you made your own trunk for your Nomad? This is going to be my winter project. I'm going to make a trunk to match the shape of style of the nomad bags. I'm going to attempt to make it look as if I have taken two Nomad bags and put them together to make a trunk. I already have a Wompus Rack. I'm still trying to decide on whether to make access to the trunk as drop down side doors like the bags or do it as a single top load door. I'd also like to use the existing OEM backrest. I'll Keep a progress report going on this as I get it started in the next month or so. __________________ NyhtRyder Patriot Guard Rider #111802 VROC #24848 Login or Register to Remove Ads
	0

09-13-2009, 09:05 AM	#2
VulcanE Sr. Member Join Date: Jan 2008 Location: Cartersville, Georgia Posts: 4,838	trunk...Updated with completed pics Sounds VERY Interesting, For ease of access though, I would suggest hinging it on the left side or front side (opens toward the handlebars) I've had both, and both have their advantages. Keep us posted, I'd like to see it. __________________ Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381
	0

09-13-2009, 09:41 AM	#3
glwilson Join Date: Jul 2008 Location: North Central Illinois Posts: 8,575	trunk...Updated with completed pics If I "see" what you are looking to do that would look great. I see the image of trunk that looks like two bags side-by-side (only shorter in height). If that is what you are talking about... it would be similar to a custom pull-trailer I saw a guy have that he made. He also emulated the look of the saddlebags (same paint as the bike also) -- which looked really cool (I couldn't get a picture and asked him to post on this site; but he didn't). Anyway... his trailer had the door open on the back-side toward the front, sort of like a car truck does. In other words, his hinges were along the top-side of the trailer (in your case on the top of the trunk right behind the passenger back-rest.). By doing it that way; you would not interfere with the passenger back-rest. You could also "dress-up" the hinges so they look good from the top-end of the bike -- and you could put some-sort of cool trunk latch using a Vulcan emblem piece. Anyway... I am sure I haven't explained this very well but if you could see what I "see", it looks really great and would be something I am sure other Nomad owners (pre-2009) would like for you to make. So... be careful in how well you make your trunk as you'll likely be hounded to make some!! Ha! Be sure to post pics as you go. __________________ "During times of universal deceit, telling the truth becomes a revolutionary act." "You can have your own opinion, but not your own facts." *Former VBA NCR Assist Regional Leader* Formerly: 2004 1500FI Bronze Nomad: 2009 & 2014 HD Ultra Current Rides: 2017 HD Ultra Limited & 2011 Can Am Spyder RTS-SE Attended: VBA National Rallies 2009, 2011, 2015; VBA/NCR Regional Rally 2010, 12, 14, 16 and several rides throughout with regional members. VBA Member #652 HOG Member #3935417
	0

09-13-2009, 09:43 AM	#4
brickguy Jr. Member Join Date: Aug 2007 Location: Hampstead, NH Posts: 12	trunk...Updated with completed pics Interesting! i will follow your progress......Brick p.s. Does anyone make a radiator chrome cover for a Nomad 1600? Can't fine one anywhere.
	0

09-13-2009, 10:09 AM	#5
xncrman Member Join Date: Feb 2009 Location: Lansing, Michigan Posts: 207	trunk...Updated with completed pics Sounds like a good project. I settled for an Ebay trunk and painted. Look forward to pics in then future. Login or Register to Remove Ads
	0

09-13-2009, 10:11 AM	#6
pirate Sr. Member Join Date: May 2008 Location: North Dakota Posts: 1,865	trunk...Updated with completed pics Good luck with your project and keep us posted!
	0

09-13-2009, 12:24 PM	#7
tazfl Advanced Member Join Date: Apr 2009 Location: Jacksonville, Florida Posts: 742	trunk...Updated with completed pics sounds like a great idea, if it were me i think i would make it top opening, think it would be allot easier as far as access goes. look forward to watching the progress. __________________ 2012 Vaquero Special edition Candy Lime Green / Ebony Cobra slip on exhaust, Kuryakyn Alley Cat intake, Cobra FI2000 Fuel Processor, Quick release trunk, Front & rear crashbars powdercoated black, Paul Yaffee stealth 3 tag frame, Arlen Ness grips, Corbin seat, Custom pinstripping, Rear LED strip turn signals, Stock rear turnsignals / tagframe assembly removed
	0

10-17-2009, 12:49 PM	#8
NyhtRyder Member Join Date: Jul 2009 Location: Indianapolis, Indiana Posts: 78	trunk...Updated with completed pics Sorry about missing the progress till the next pic, but my memory card on my camera crapped out on me. This is where I am currently. The sides will be built out like the doors of the bags. More pics to follow as I make progress. __________________ NyhtRyder Patriot Guard Rider #111802 VROC #24848
	0

10-17-2009, 03:20 PM	#9
jestephens Join Date: Jan 2009 Location: Fairview Heights, IL (StLouis) Posts: 1,601	trunk...Updated with completed pics Wow, this seems to be working well so far. Good job! __________________ Jay Stephens, Former National Vice President (2013-2015) 2006 Yamaha FJR1300 formerly 2011 Vaquero- Black formerly 2005 Nomad - black/silver
	0

10-17-2009, 03:43 PM	#10
wheelie Member Join Date: Aug 2007 Location: Neoga, IL Posts: 433	trunk...Updated with completed pics Looking Good! Can't wait to see the finished product. __________________ You never slow down you never grow old VBA #656 Black 2007 1600 Nomad
	0

10-17-2009, 03:48 PM	#11
wompus Join Date: Feb 2008 Location: Gainesville, Ga. Posts: 1,950	trunk...Updated with completed pics When you get it finished I want a couple pictures to add to my web page. The shape is why I went with the early Yamaha trunk, it's the closest shape to the bags I've seen so far.... cept yours! ;) __________________ Mike "WOMPUS' Nieznany 1999 Nomad "Fronkensteen" Viet Nam Vet 68-69-70 KawaNOW #00577 I'm sarcastic and have a smart ass attitude. It's a natural defense against DRAMA, BULLSHIT & STUPIDITY!!
	0

10-17-2009, 04:08 PM	#12
NyhtRyder Member Join Date: Jul 2009 Location: Indianapolis, Indiana Posts: 78	trunk...Updated with completed pics Not a problem Mike. __________________ NyhtRyder Patriot Guard Rider #111802 VROC #24848
	0

10-17-2009, 04:26 PM	#13
Jared Join Date: Mar 2009 Location: Greeley, Colorado Posts: 6,772	trunk...Updated with completed pics Looking good! I really really like the idea! Just one question---will you be adding pads of some sort for a passenger to lean on? If so, and if the pad/backrest is vertical, what will you do with the space near the bottom of their back and the bottom front of the trunk? Will there just be a gap there? __________________ Jared VBA #1051 (Former President)
	0

10-18-2009, 06:53 AM	#15
bokobob Member Join Date: Jul 2009 Location: Gastonia, NC Posts: 294	trunk...Updated with completed pics Superb workmanship...excellent design. __________________ Old Bob, a 1936 Model 2007 Nomad...Sold....too heavy for me :-( 1994 Honda Magna V4...Geezer sized :-)
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Updated Profile Pics	bkmaxvrb	Vulcan Nomad/Vaquero/Voyager	2	05-07-2010 04:20 PM
Operation Rice Glide Complete!Updated Pics	jasperboy	Vulcan Nomad/Vaquero/Voyager	17	04-19-2010 08:52 PM
Just a few Custer pics UPDATED	audiogooroo	National Rally 2009 - Custer, SD	12	06-23-2009 10:04 PM
Big wiring project UPDATED w/pics	cactusjack	1500 & 1600 Nomad	16	11-19-2008 10:50 PM
Mutazu Trunk and Bracket Pics	Cajunrider	Vulcan Nomad/Vaquero/Voyager	20	11-08-2008 09:41 PM