1500 Nomad Driveshaft

ndbigfish · 09-27-2013, 07:24 PM

I have a used, 1500 driveshaft with a new u-joint installed. U-joint was installed by a local, independent shop. The U joint can be greased through a needle fitting. This was a back-up for me just in case; I never needed it. I want $60 for the driveshaft/u-joint. Buyer is responsible for shipping.

smbke · 09-28-2013, 12:44 PM

Does the u-joint have a zerk fitting?

ndbigfish · 09-28-2013, 01:41 PM

Quote:

Originally Posted by smbke

Does the u-joint have a zerk fitting?

It has a needle fitting in the opening in one of the yokes. I don't think there is room for zerk in the body of the u-joint in this driveline. It would be nice to find one like that.

ndbigfish · 12-02-2013, 10:20 PM

This driveshaft with a new U joint is still available.

skeeterv · 12-02-2013, 10:32 PM

Quote:

Originally Posted by ndbigfish

This driveshaft with a new U joint is still available.

I might be interested! How are the splines? Any idea on the shipping cost to 78566, Bayview, TX?

Skeeter

ndbigfish · 12-03-2013, 09:01 PM

The driveline was off a low mileage motorcycle but I'll verify the condition.

ndbigfish · 12-03-2013, 10:50 PM

All the splines are in good condition. The u joint is capable of being greased with a needle adapter. I'll post some pictures later as the ones from my phone are too large.

skeeterv · 12-04-2013, 12:48 AM

Quote:

Originally Posted by ndbigfish

All the splines are in good condition. The u joint is capable of being greased with a needle adapter. I'll post some pictures later as the ones from my phone are too large.

Sounds good! Thanks for checking it out.

Skeeter

ndbigfish · 02-21-2014, 10:47 PM

This driveline and U-joint is still available.

Loafer · 02-22-2014, 06:02 AM

I surprised no one has bought this item, hope you have better luck with it.

ndbigfish · 02-22-2014, 09:38 PM

I've added pictures for the viewers.

shamelessbill · 05-05-2014, 08:52 AM

Will this fit a 2000 Nomad Fi? If yes (and still available) please LMK

Bill

ndbigfish · 05-09-2014, 05:45 PM

Quote:

Originally Posted by shamelessbill

Will this fit a 2000 Nomad Fi? If yes (and still available) please LMK

Bill

Bill,
Still waiting on an answer. Just let me know.

**ringadingh** · 05-09-2014, 06:20 PM

It will fit 99 to 08

**MAS Tequila** · 05-10-2014, 08:06 AM

Yes it is the same as the 2000. All of the 1500's are the same.

As far as the 1600's, I know that the wheel is further back. The swingarm and the final drive are different.

Jim in Atlanta had to use the 1600 driveshaft when he put the 1600 swingarm on the 1500 due to the added length.

MT

09-28-2013, 12:44 PM	#2
smbke Advanced Member Join Date: Jun 2012 Location: Las Vegas, NV Posts: 809	Does the u-joint have a zerk fitting? __________________ Las Vegas, Nv VBA #02107 2003 Vulcan Nomad 1500 1980 Yamaha Seca 750 (past) 1969 Kawasaki 350 (past) 1967 Pannonia T8 250 (past) 1971 Honda 100 Twin (past)
	0

12-02-2013, 10:20 PM	#4
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	This driveshaft with a new U joint is still available. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

12-03-2013, 09:01 PM	#6
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	The driveline was off a low mileage motorcycle but I'll verify the condition. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13 Last edited by ndbigfish; 12-03-2013 at 10:40 PM.
	0

12-03-2013, 10:50 PM	#7
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	All the splines are in good condition. The u joint is capable of being greased with a needle adapter. I'll post some pictures later as the ones from my phone are too large. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

02-21-2014, 10:47 PM	#9
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	This driveline and U-joint is still available. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

02-22-2014, 06:02 AM	#10
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	I surprised no one has bought this item, hope you have better luck with it. __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

02-22-2014, 09:38 PM	#11
ndbigfish Sr. Member Join Date: Mar 2009 Location: New Braunfels, Texas Posts: 1,162	I've added pictures for the viewers. __________________ Brik VBA #1047 07 Electra Glide Ultra (43,300 & counting) 03 Nomad - 37,972 (traded 5/6/13) 99 Nomad - Only a memory since 4/27/13
	0

05-05-2014, 08:52 AM	#12
shamelessbill Jr. Member Join Date: Jan 2014 Location: Marietta GA Posts: 38	Will this fit a 2000 Nomad Fi? If yes (and still available) please LMK Bill
	0

05-09-2014, 06:20 PM	#14
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	It will fit 99 to 08 __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

05-10-2014, 08:06 AM	#15
MAS Tequila Join Date: Jan 2009 Location: Psychiatric Ward FL Posts: 3,429	Yes it is the same as the 2000. All of the 1500's are the same. As far as the 1600's, I know that the wheel is further back. The swingarm and the final drive are different. Jim in Atlanta had to use the 1600 driveshaft when he put the 1600 swingarm on the 1500 due to the added length. MT __________________ MT 2016 FLHP Psychiatric Ward FL VBA 936
	0