"NEW" Chuckster backing plate (Update Pg 6)

dkdixie · 03-16-2009, 06:11 AM

"New" Chuckster backing plate allowing use of 7" K&N filter.

Joe (Chuckster) sent these pictures showing plate, prototype installed, and plate with 7" K&N filter installed.

This is an option to using a Thunder Mfg backing plate, which is 200.00+ compared to 40.00 (shipped) for Chuckster if you are planning to remove all the plumbing, solenoids, etc.

Also an option to using a 7" filter instead of 9" on Caddman mod.
I did the Caddman mod, but was looking for alternative to using 9" filter.

And last, but not least, "should" be able to use stock dog bowls if you do not like exposed filter look.

I ordered one which should be shipped today. I plan to use the stock "dog bowls," which IMO just look better than exposed filter.

Hopefully, Joe will jump in here with a little more tech information. ;)

[

rewindgy · 03-16-2009, 07:56 AM

Me likie! Need pictures of this set-up with stock Dog Bowl!

blowndodge · 03-16-2009, 08:48 AM

I've been waiting for something other than the $200+ Thunder kit!!! Me likie too!!

dkdixie · 03-16-2009, 09:21 AM

Well git 'em ordered guys. I need the commission check!

Just kidding

cactusjack · 03-16-2009, 09:38 AM

Chuckster emailed me on Saturday, telling me he had these available. I immediately ordered one from him, along with one of these:

http://filtersandintakes.com/catalog...oducts_id=1619

This is the best deal you'll find on a 7" K&N filter assembly AND the price includes shipping. The usual going rate for one is ~$70, I've seen some as high as $139

.

I'm hoping everything arrives this week and I'll have this set up next weekend. I'm doing about a 400 mile ride next Sunday.

blowndodge · 03-16-2009, 09:45 AM

Is removing the crossover tube mandatory to install this backing plate????

**coacha** · 03-16-2009, 09:46 AM

Quote:

Originally Posted by "dk dixie"

Well git 'em ordered guys. I need the commission check!

Just kidding

Commission check? Man, I got him hooked up for all kinds of things on this board and I didn't get one...all I got was a lousy chuckster T-shirt, lol.

dkdixie · 03-16-2009, 09:49 AM

CJ, that's a 7x3 high filter....correct? I've been trying to find 7" x 2" filter only.

dkdixie · 03-16-2009, 09:50 AM

Quote:

Originally Posted by Blowndodge "Darksider"

Is removing the crossover tube mandatory to install this backing plate????

BD, I was told....no

cactusjack · 03-16-2009, 09:55 AM

Quote:

Originally Posted by Blowndodge "Darksider"

Is removing the crossover tube mandatory to install this backing plate????

No, but since there is no opening in the plate for it, it becomes useless.

cactusjack · 03-16-2009, 09:59 AM

Quote:

Originally Posted by "dk dixie"

CJ, that's a 7x3 high filter....correct? I've been trying to find 7" x 2" filter only.

Yeah, it is a 7x3. I don't think K&N makes a 7x2 that's compatible. I don't care, personally. I can live with it.

Speaking of which, I won't have a need for my 9" Spectre Filter assembly with the 9x2 K&N filter any longer once I get this done. If interested, PM me with an offer.

radco · 03-16-2009, 10:17 AM

NICE Looks Like Joe has another winner :)...

redeye · 03-16-2009, 10:46 AM

BD, There was a news story in Sacramento about California wanting to start to do SMOG checks on motorcycles model years 2000 & newer.

http://news.motorbiker.org/blogs.nsf...smog-check.htm

mikesth · 03-16-2009, 10:56 AM

So - simple - if we have pipes will we need to add a FI controller too?

**billyboy** · 03-16-2009, 11:18 AM

Only had my 2008 Nomad for a couple weeks, so I'm apprehensive to start ripping out engine parts while I'm still in the motor break-in period. I understand that removing the crossover tube pretty much destroys it. I won't do anything that I can't reverse.

But I'm looking to make it breathe easier and keep the stock pipes. Perhaps remove the silencers eventually.

I also want to keep the stock air cleaner on the left side and a balanced look for both sides.

Will this backing plate allow this?

03-16-2009, 06:11 AM	#1
dkdixie Sr. Member Join Date: Nov 2007 Location: Blairsville in N. GA mountains Posts: 1,623	"NEW" Chuckster backing plate (Update Pg 6) "New" Chuckster backing plate allowing use of 7" K&N filter. Joe (Chuckster) sent these pictures showing plate, prototype installed, and plate with 7" K&N filter installed. This is an option to using a Thunder Mfg backing plate, which is 200.00+ compared to 40.00 (shipped) for Chuckster if you are planning to remove all the plumbing, solenoids, etc. Also an option to using a 7" filter instead of 9" on Caddman mod. I did the Caddman mod, but was looking for alternative to using 9" filter. And last, but not least, "should" be able to use stock dog bowls if you do not like exposed filter look. I ordered one which should be shipped today. I plan to use the stock "dog bowls," which IMO just look better than exposed filter. Hopefully, Joe will jump in here with a little more tech information. ;) [ __________________ Dick Campbell Blairsville, GA 2008 Red & Black Nomad 1600 (retired) 2009 1900 Yamaha Stratoliner (retired) 2013 1900 Yamaha Stratoliner 2018 CanAm RT Limited Spyder (Sold) 2014 Goldwing Roadsmith Red Trike (Sold) 2019 Goldwing DCT Roadsmith Copper & Black Trike VBA #243 Darkside #115 Patriot Guard Rider American Legion Rider Login or Register to Remove Ads
	0

03-16-2009, 07:56 AM	#2
rewindgy Advanced Member Join Date: Jul 2007 Location: Calgary, Alberta, Canada Posts: 959	"NEW" Chuckster backing plate (Update Pg 6) Me likie! Need pictures of this set-up with stock Dog Bowl!
	0

03-16-2009, 08:48 AM	#3
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	"NEW" Chuckster backing plate (Update Pg 6) I've been waiting for something other than the $200+ Thunder kit!!! Me likie too!! __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

03-16-2009, 09:21 AM	#4
dkdixie Sr. Member Join Date: Nov 2007 Location: Blairsville in N. GA mountains Posts: 1,623	"NEW" Chuckster backing plate (Update Pg 6) Well git 'em ordered guys. I need the commission check! Just kidding __________________ Dick Campbell Blairsville, GA 2008 Red & Black Nomad 1600 (retired) 2009 1900 Yamaha Stratoliner (retired) 2013 1900 Yamaha Stratoliner 2018 CanAm RT Limited Spyder (Sold) 2014 Goldwing Roadsmith Red Trike (Sold) 2019 Goldwing DCT Roadsmith Copper & Black Trike VBA #243 Darkside #115 Patriot Guard Rider American Legion Rider
	0

03-16-2009, 09:38 AM	#5
cactusjack Mega-Contributor Join Date: Sep 2007 Location: Where it doesn't snow...ever! Posts: 21,926	"NEW" Chuckster backing plate (Update Pg 6) Chuckster emailed me on Saturday, telling me he had these available. I immediately ordered one from him, along with one of these: http://filtersandintakes.com/catalog...oducts_id=1619 This is the best deal you'll find on a 7" K&N filter assembly AND the price includes shipping. The usual going rate for one is ~$70, I've seen some as high as $139 . I'm hoping everything arrives this week and I'll have this set up next weekend. I'm doing about a 400 mile ride next Sunday. __________________ Scott "Cactusjack" Hanks VBA #00105 H.O.G. #4250060 2011 H-D Ultra Limited 103ci :: 2011 HD Electra Glide Ultra Limited w/Stage 1 :: Rallies: Mesquite '08\|Custer '09\|Cortez '10\|Crescent City '11\|Kanab '12\|Antlers '12\|Estes Park '13\|Antlers '13\|Orofino '14\|The Dalles '17 Login or Register to Remove Ads
	0

03-16-2009, 09:45 AM	#6
blowndodge Sr. Contributor Join Date: Jul 2007 Location: Washington City, Utah Posts: 16,474	"NEW" Chuckster backing plate (Update Pg 6) Is removing the crossover tube mandatory to install this backing plate???? __________________ I love my Victory Cross Country Tour 106. Smells like Victory! Ultra's are Limited There are two types of Harley riders. Those that trailer them and those that push them. The most Interesting Man in the World "Find the things in life you don't do well and don't do those things" Member # 0005
	0

03-16-2009, 09:49 AM	#8
dkdixie Sr. Member Join Date: Nov 2007 Location: Blairsville in N. GA mountains Posts: 1,623	"NEW" Chuckster backing plate (Update Pg 6) CJ, that's a 7x3 high filter....correct? I've been trying to find 7" x 2" filter only. __________________ Dick Campbell Blairsville, GA 2008 Red & Black Nomad 1600 (retired) 2009 1900 Yamaha Stratoliner (retired) 2013 1900 Yamaha Stratoliner 2018 CanAm RT Limited Spyder (Sold) 2014 Goldwing Roadsmith Red Trike (Sold) 2019 Goldwing DCT Roadsmith Copper & Black Trike VBA #243 Darkside #115 Patriot Guard Rider American Legion Rider
	0

03-16-2009, 10:17 AM	#12
radco Sr. Member Join Date: Oct 2007 Location: Dedham Maine Posts: 4,199	"NEW" Chuckster backing plate (Update Pg 6) NICE Looks Like Joe has another winner :)... __________________
	0

03-16-2009, 10:46 AM	#13
redeye Advanced Member Join Date: Dec 2007 Location: Rocklin California Posts: 777	"NEW" Chuckster backing plate (Update Pg 6) BD, There was a news story in Sacramento about California wanting to start to do SMOG checks on motorcycles model years 2000 & newer. http://news.motorbiker.org/blogs.nsf...smog-check.htm
	0

03-16-2009, 10:56 AM	#14
mikesth Member Join Date: Nov 2007 Location: Katy Texas Posts: 478	"NEW" Chuckster backing plate (Update Pg 6) So - simple - if we have pipes will we need to add a FI controller too?
	0

03-16-2009, 11:18 AM	#15
billyboy Join Date: Feb 2009 Location: Fairview Park, OH Posts: 147	"NEW" Chuckster backing plate (Update Pg 6) Only had my 2008 Nomad for a couple weeks, so I'm apprehensive to start ripping out engine parts while I'm still in the motor break-in period. I understand that removing the crossover tube pretty much destroys it. I won't do anything that I can't reverse. But I'm looking to make it breathe easier and keep the stock pipes. Perhaps remove the silencers eventually. I also want to keep the stock air cleaner on the left side and a balanced look for both sides. Will this backing plate allow this?
	0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chuckster back plate with 7" K&N	Jared	Vulcan Nomad/Vaquero/Voyager	15	07-06-2012 05:46 AM
7" backing plate filter	shoer00	1500 & 1600 Nomad	8	03-20-2010 08:44 PM
Chuckster 7 in backing plate/filter	flavor	1500 & 1600 Nomad	36	03-15-2010 03:21 PM
Chuckster 7" plate mod-Update	dkdixie	1500 & 1600 Nomad	9	07-28-2009 05:34 AM
"Chuckster" plate w/stock cover or open filter	dkdixie	1500 & 1600 Nomad	13	04-18-2009 08:18 AM