Rear Turn Signal Lenses

Tortuga · 02-08-2022, 07:58 AM

I want to install modified '59 Caddy lenses on my new to me '14 Nomad. I had done this on my '06 Nomad and '00 Venture. I had to cut down the length to fit the housing. Much to my surprise the '14 lenses are fused/glued to the innards of the light that hold the bulb. Anybody have any ides how they can be separated? Seems crazy that if you broke a lens you'd have to buy the whole guts and lens as a unit.

Peg · 02-09-2022, 12:34 AM

It's not a simple lens cover... A few of us have swapped them out for clear or smoked lenses, and it wasn't cheap to do so. "Lights4all" is a German company who used to provide the only clear / smoked lenses for 1700's I'm aware of - and they don't seem to carry them any more. Good luck with your conversion though, it'll be a nice challenge for you

DragonLady58 · 03-12-2022, 07:29 PM

Try CaddyDaddy.com

https://www.caddydaddy.com/media/cat...tlset4-1_1.jpg
mooneyesusa.com
speedwaymotors.com

Tortuga · 03-12-2022, 07:40 PM

I have the lenses. What I need is a stock signal housing with lense in tact to figure out how to separate the two without wrecking the housing.

DragonLady58 · 03-12-2022, 07:50 PM

roadking0678 · 03-21-2022, 08:45 PM

Im sorry I cant recall where... but I saw a post about this issue and what a few people have done is just buy new turnsignals from Ebay with the same stem size. Im considering this myself because for whatever reason the yellow ones in the rear drive me nuts! LOL

02-08-2022, 07:58 AM	#1
Tortuga Advanced Member Join Date: Mar 2016 Location: Sahuarita, AZ Posts: 559	Rear Turn Signal Lenses I want to install modified '59 Caddy lenses on my new to me '14 Nomad. I had done this on my '06 Nomad and '00 Venture. I had to cut down the length to fit the housing. Much to my surprise the '14 lenses are fused/glued to the innards of the light that hold the bulb. Anybody have any ides how they can be separated? Seems crazy that if you broke a lens you'd have to buy the whole guts and lens as a unit. Login or Register to Remove Ads
	0

02-09-2022, 12:34 AM	#2
Peg Sr. Member Join Date: Apr 2012 Location: West Coast, North Island, New Zealand Posts: 1,375	It's not a simple lens cover... A few of us have swapped them out for clear or smoked lenses, and it wasn't cheap to do so. "Lights4all" is a German company who used to provide the only clear / smoked lenses for 1700's I'm aware of - and they don't seem to carry them any more. Good luck with your conversion though, it'll be a nice challenge for you __________________ Nothing screams poor workmanship like wrinkles in the duct tape '02 1500 blonde Nomad (Sold) '97 800 burgundy Classic (Sold)
	0

03-12-2022, 07:29 PM	#3
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	Try CaddyDaddy.com https://www.caddydaddy.com/media/cat...tlset4-1_1.jpg mooneyesusa.com speedwaymotors.com __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Last edited by DragonLady58; 03-12-2022 at 07:48 PM.
	0

03-12-2022, 07:50 PM	#5
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	__________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride! Login or Register to Remove Ads
	0

03-21-2022, 08:45 PM	#6
roadking0678 Jr. Member Join Date: Oct 2017 Location: Bellevue, TX Posts: 24	Im sorry I cant recall where... but I saw a post about this issue and what a few people have done is just buy new turnsignals from Ebay with the same stem size. Im considering this myself because for whatever reason the yellow ones in the rear drive me nuts! LOL __________________ VBA member #3627 1999 Nomad 2015 Voyager
	0

03-12-2022, 07:40 PM	#4
Tortuga Advanced Member Join Date: Mar 2016 Location: Sahuarita, AZ Posts: 559	I have the lenses. What I need is a stock signal housing with lense in tact to figure out how to separate the two without wrecking the housing.
	0