|
02-06-2016, 07:50 PM | #1 |
Member
Join Date: May 2013
Location: Memphis, TN
Posts: 80
|
RH turn signal doesn't work, hazards do
Good evening all...picked up my new-to-me Voyager today. 2010...pristine, 20K miles, seems to be very well kept and hardly a mark on it.
RH turn signal doesn't work when activating with handlebar switch. However, seems fine with hazards on. So...bad switch? Bike was on consignment with PO in poor health...he had only had it since May so I don't have access to info from him Thanks in advance...pictures coming!
__________________
2010 Kawasaki Voyager 1700 ABS Bikes I Miss: 02 Kawasaki Nomad 1500 04 Suzuki Volusia (black) 07 Suzuki C50 (maroon/red) 04 Suzuki Volusia (blue/gray) Login or Register to Remove Ads |
|
02-06-2016, 08:19 PM | #2 |
Advanced Member
Join Date: Sep 2015
Posts: 542
|
Check relay I think it is different when using 4 ways as opposed to one side of signal only. I recall my car used a separate relay for each
|
|
02-06-2016, 09:29 PM | #3 |
Sr. Member
Join Date: Apr 2008
Location: Burnsville, NC
Posts: 1,589
|
I had same problem most likely it is just a dirty switch the dealer used some belray 6 in one on the switch and fixed the problem
__________________
David "BigDave" Hall Burnsville NC VBA #477 2007 Red and Silver Nomad (traded 4/10/2014) 2013 Blue and Black Voyager |
|
02-06-2016, 10:08 PM | #4 |
Join Date: May 2015
Location: Marietta, GA
Posts: 838
|
|
|