Avatars & Signatures - Page 7

**glwilson** · 09-29-2011, 08:52 PM

Quote:

Originally Posted by Admin

What's the problem?

The problem is that it is difficult to load pics for the avatar and sig-pics.

I have just given-up... and I followed every single word of the instructions.

Just saying...

**Admin** · 09-29-2011, 08:59 PM

If you followed all the directions in this thread, it will work.

Loafer · 09-29-2011, 09:06 PM

Originally Posted by clayton

Ok figured it out...
For those of you with the same issue...do as follows:
Under your User Control Panel, scroll down to the Settings and Options heading and under that select "Edit Options"
Scroll down to the bottom under Miscellaneous Options and select Standard or Enhanced editor.
Now when you go back to attach your pic to the signature the "Insert Signature Picture" will be there...
At least for me it is now :)

**glwilson** · 09-29-2011, 09:48 PM

Did all of that so many times and it still doesn't work.

No picture for sig-pic or avatar.

I give up... and "yes" I have the enhance version, have read and re-read, and followed every step of the instructions... and guess what? It still doesn't work.

I am on other forums with v-boards, and I have not had any problems with them.

I give up....

**glwilson** · 09-29-2011, 09:53 PM

Well... the avatar pic worked this time... what a fool I am. But I promise I did not do anything different this time than any previous time.

But still cannot get a sig pic to work yet.

skeeter · 09-30-2011, 01:31 AM

Hey Norm what are the pixel dimensions of your sig pic?

Nosivad · 09-30-2011, 04:49 AM

Click on user CP on red bar near the top. Go down to edit profile picture and select the option to download from your computer. Make sure the picture is not too many Kbs otherwise you would need to change it using a photo editing software.

**cnc** · 09-30-2011, 08:09 AM

Quote:

Originally Posted by skeeter

Hey Norm what are the pixel dimensions of your sig pic?

Right click on the pic, left click on properties you will see that info.

skeeter · 09-30-2011, 11:03 PM

Thanks Norm....
hmmm, changed pic in photobucket to those dimension (12+ kb) and pic dimension did not change on forum

What's up Admin? All things being equal.....

Loafer · 10-01-2011, 07:34 AM

Did you miss the post he made about paying 'EXTRA' ??
Or my post about it being an East Coast Option Only ??

Bull Durham · 10-01-2011, 11:26 AM

Mine finally started showing the Avatar and Sig pic the other day, but after spending a couple hours previously on it trying to get it to work, I would have to say it was very unfriendly. Then throw in the smug quips from Admin saying stuff like "what's so hard!" didn't help out my blood pressure any...............

**Admin** · 10-01-2011, 03:26 PM

Whoa. I wasn't being 'smug' at all, and I didn't use an exclamation mark. I was simply asking what was so hard...what is it you're having trouble with? That's all I meant by it.

The directions on how to do signature images and avatars has been explained several times over by myself and others in this thread. If you follow them perfectly, it WILL work. There's obviously a step you're leaving out if it's not working.

Here's the instructions again for the sig pic:

And make sure that the enhanced editor is enabled. ( UserCP >> Edit Options >> Misc Options ).

ridemslow · 10-01-2011, 08:21 PM

Well I've sized and loaded, sized and reloaded my signature picture, and so far it is not working. This forum is hard to navigate and to understand. We had it good before the change, sure hope/wish I can someday say the same here.

Loafer · 10-01-2011, 08:42 PM

Quote:

Originally Posted by ridemslow

Well I've sized and loaded, sized and reloaded my signature picture, and so far it is not working. This forum is hard to navigate and to understand. We had it good before the change, sure hope/wish I can someday say the same here.

Delete everything take a deep breath and let it out slowly, and start over.

ridemslow · 10-01-2011, 08:43 PM

Quote:

Originally Posted by Admin

If you followed all the directions in this thread, it will work.

NO IT DON'T! At least not yet.

09-29-2011, 09:06 PM	#93
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Originally Posted by clayton Ok figured it out... For those of you with the same issue...do as follows: Under your User Control Panel, scroll down to the Settings and Options heading and under that select "Edit Options" Scroll down to the bottom under Miscellaneous Options and select Standard or Enhanced editor. Now when you go back to attach your pic to the signature the "Insert Signature Picture" will be there... At least for me it is now :) __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

09-29-2011, 09:48 PM	#94
glwilson Join Date: Jul 2008 Location: North Central Illinois Posts: 8,575	Did all of that so many times and it still doesn't work. No picture for sig-pic or avatar. I give up... and "yes" I have the enhance version, have read and re-read, and followed every step of the instructions... and guess what? It still doesn't work. I am on other forums with v-boards, and I have not had any problems with them. I give up.... __________________ "During times of universal deceit, telling the truth becomes a revolutionary act." "You can have your own opinion, but not your own facts." *Former VBA NCR Assist Regional Leader* Formerly: 2004 1500FI Bronze Nomad: 2009 & 2014 HD Ultra Current Rides: 2017 HD Ultra Limited & 2011 Can Am Spyder RTS-SE Attended: VBA National Rallies 2009, 2011, 2015; VBA/NCR Regional Rally 2010, 12, 14, 16 and several rides throughout with regional members. VBA Member #652 HOG Member #3935417
	0

09-29-2011, 09:53 PM	#95
glwilson Join Date: Jul 2008 Location: North Central Illinois Posts: 8,575	Well... the avatar pic worked this time... what a fool I am. But I promise I did not do anything different this time than any previous time. But still cannot get a sig pic to work yet. __________________ "During times of universal deceit, telling the truth becomes a revolutionary act." "You can have your own opinion, but not your own facts." *Former VBA NCR Assist Regional Leader* Formerly: 2004 1500FI Bronze Nomad: 2009 & 2014 HD Ultra Current Rides: 2017 HD Ultra Limited & 2011 Can Am Spyder RTS-SE Attended: VBA National Rallies 2009, 2011, 2015; VBA/NCR Regional Rally 2010, 12, 14, 16 and several rides throughout with regional members. VBA Member #652 HOG Member #3935417 Login or Register to Remove Ads Last edited by glwilson; 09-29-2011 at 09:56 PM.
	0

09-30-2011, 01:31 AM	#96
skeeter Sr. Member Join Date: Mar 2008 Location: Kerrville Tx Posts: 1,713	Hey Norm what are the pixel dimensions of your sig pic? __________________ Robert(skeeter)Dozier 07 Red&Titanium Nomad 81 Suzuki 850GL KawaNow pre#
	0

09-30-2011, 04:49 AM	#97
Nosivad Member Join Date: Sep 2011 Location: mussidan,dordogne,France- same latitude as Montreal Posts: 120	Click on user CP on red bar near the top. Go down to edit profile picture and select the option to download from your computer. Make sure the picture is not too many Kbs otherwise you would need to change it using a photo editing software. __________________ The older I get, the better I was VBA #01863
	0

09-29-2011, 08:59 PM	#92
Admin Administrator Join Date: Sep 2011 Location: NY Posts: 421	If you followed all the directions in this thread, it will work.
	0

09-30-2011, 11:03 PM	#99
skeeter Sr. Member Join Date: Mar 2008 Location: Kerrville Tx Posts: 1,713	Thanks Norm.... hmmm, changed pic in photobucket to those dimension (12+ kb) and pic dimension did not change on forum What's up Admin? All things being equal..... __________________ Robert(skeeter)Dozier 07 Red&Titanium Nomad 81 Suzuki 850GL KawaNow pre# Last edited by skeeter; 09-30-2011 at 11:41 PM.
	0

10-01-2011, 07:34 AM	#100
Loafer Sr. Contributor Join Date: Dec 2008 Posts: 18,287	Did you miss the post he made about paying 'EXTRA' ?? Or my post about it being an East Coast Option Only ?? __________________ Gerry Martineau / 802 VT / VBA #0892 /[email]glmjgm@gmail.com[email]
	0

10-01-2011, 11:26 AM	#101
Bull Durham Advanced Member Join Date: Sep 2010 Location: Pittsburgh, PA area Posts: 785	Mine finally started showing the Avatar and Sig pic the other day, but after spending a couple hours previously on it trying to get it to work, I would have to say it was very unfriendly. Then throw in the smug quips from Admin saying stuff like "what's so hard!" didn't help out my blood pressure any............... __________________ 2005 Kawasaki Nomad VBA #1608 KZR #25622
	0

10-01-2011, 03:26 PM	#102
Admin Administrator Join Date: Sep 2011 Location: NY Posts: 421	Whoa. I wasn't being 'smug' at all, and I didn't use an exclamation mark. I was simply asking what was so hard...what is it you're having trouble with? That's all I meant by it. The directions on how to do signature images and avatars has been explained several times over by myself and others in this thread. If you follow them perfectly, it WILL work. There's obviously a step you're leaving out if it's not working. Here's the instructions again for the sig pic: And make sure that the enhanced editor is enabled. ( UserCP >> Edit Options >> Misc Options ).
	0

10-01-2011, 08:21 PM	#103
ridemslow Sr. Member Join Date: Jul 2007 Location: Chesapeake, Ohio Posts: 1,537	Well I've sized and loaded, sized and reloaded my signature picture, and so far it is not working. This forum is hard to navigate and to understand. We had it good before the change, sure hope/wish I can someday say the same here.
	0