2007 Nomad won't start - Page 3

recumbentbob · 07-22-2017, 09:34 AM

Quote:

Originally Posted by Tortuga

Good that you found the problem, but I thought you said there was no filter/strainer when you took the OEM pump out.

I didn't think there was but I hadn't disassembled it all the way.

VulcanE · 07-24-2017, 06:12 PM

Which fuel pump did you use? Maw Kaw OEM, or aftermarket?

**Rasta** · 07-24-2017, 06:55 PM

Quote:

Originally Posted by VulcanE

Which fuel pump did you use? Maw Kaw OEM, or aftermarket?

I was wondering the same thing

recumbentbob · 07-25-2017, 06:08 AM

Used the after market Quantum pump.
http://www.highflowfuel.com/i-234435...2006-2008.html

kresh · 03-16-2018, 05:56 PM

Did anyone ever resolve this issue? I have a 2005 1600 Nomad with the exact same symptoms.

**canuckrider** · 03-17-2018, 02:19 PM

Quote:

Originally Posted by kresh

Did anyone ever resolve this issue? I have a 2005 1600 Nomad with the exact same symptoms.

Read post #29 in this thread. Looks like the problem was resolved with a new fuel pump.

I had the fuel regulator go bad on my '08. It would pump fuel but not at the correct pressure so ran like crap when it did run.

Tortuga · 03-18-2018, 10:37 AM

FYI: I've had the Quantum pump in my '06 Nomad for over a year and a half and so far so good. I've changed the "filter" twice since they're so cheap. First time there was some crud. I did it at about 8 months. Second time...last week....there was very little. My tank had a lot of crud in it when I got the bike and had the original pump crap out. It may have been the filter but for $70 I figured I'd start from scratch.

Ridefree · 03-18-2018, 11:22 AM

I thought this might be useful information for anyone reading this thread . On my 2001 Nomad a couple of years ago I had to replace the throttle body because of a bad TPS sensor . I decided to check the pump and filter while I was at it . The filter was bad so I took it to a local dealer and found a filter for $8.00 ( GKI #GF61M ) . It fits perfectly .

Also I found that there is a small screen inside the fuel pressure regulator . Two bolts and it was off . I found what looked like small bits of silicone . I'm guessing this came from the old filter inside the tank . The bike has ran perfectly since changing the filter and cleaning out the small screen inside the regulator .

The bike always seemed to run a little rough until I did this . Ran like a brand new bike ever since ..

07-24-2017, 06:12 PM	#32
VulcanE Sr. Member Join Date: Jan 2008 Location: Cartersville, Georgia Posts: 4,838	Which fuel pump did you use? Maw Kaw OEM, or aftermarket? __________________ Cliff "VulcanE" Evans 2005 Blue & Silver 1600 Nomad VBA # 320 VROC # 20381
	0

07-25-2017, 06:08 AM	#34
recumbentbob Sr. Member Join Date: Mar 2009 Location: Newburgh IN Posts: 3,404	Used the after market Quantum pump. http://www.highflowfuel.com/i-234435...2006-2008.html __________________ VBA #01084 "A well regulated militia being necessary to the security of a free State, the right of the People to keep and bear arms shall not be infringed."
	0

03-16-2018, 05:56 PM	#35
kresh Jr. Member Join Date: Jan 2015 Location: High Point, NC Posts: 2	Did anyone ever resolve this issue? I have a 2005 1600 Nomad with the exact same symptoms. Login or Register to Remove Ads
	0

03-18-2018, 10:37 AM	#37
Tortuga Advanced Member Join Date: Mar 2016 Location: Sahuarita, AZ Posts: 559	FYI: I've had the Quantum pump in my '06 Nomad for over a year and a half and so far so good. I've changed the "filter" twice since they're so cheap. First time there was some crud. I did it at about 8 months. Second time...last week....there was very little. My tank had a lot of crud in it when I got the bike and had the original pump crap out. It may have been the filter but for $70 I figured I'd start from scratch.
	0

03-18-2018, 11:22 AM	#38
Ridefree Sr. Member Join Date: May 2015 Location: Saskatchewan , Canada Posts: 1,441	I thought this might be useful information for anyone reading this thread . On my 2001 Nomad a couple of years ago I had to replace the throttle body because of a bad TPS sensor . I decided to check the pump and filter while I was at it . The filter was bad so I took it to a local dealer and found a filter for $8.00 ( GKI #GF61M ) . It fits perfectly . Also I found that there is a small screen inside the fuel pressure regulator . Two bolts and it was off . I found what looked like small bits of silicone . I'm guessing this came from the old filter inside the tank . The bike has ran perfectly since changing the filter and cleaning out the small screen inside the regulator . The bike always seemed to run a little rough until I did this . Ran like a brand new bike ever since ..
	0