wtb 1600 mean streak ecu for a 2006

[extreemthrottle]

just like the title says, before i go the route of ebay, wanted to post here first.
i have paypal at the ready. please pm me what you have and how much shipped to 33403 florida.
thanks

[VulcanE]

Been there, done that (still set-up like that). If your wanting to put it on your 1600 Nomad, you will also need the throttle body and intake off the Meanie too. You'll also have to do something with the fuel pressure regulator that is mounted on the fuel rail of the Meanie throttle body (the Nomad's in the tank as part of the fuel pump).

[extreemthrottle]

Originally Posted by VulcanE

Been there, done that (still set-up like that). If your wanting to put it on your 1600 Nomad, you will also need the throttle body and intake off the Meanie too. You'll also have to do something with the fuel pressure regulator that is mounted on the fuel rail of the Meanie throttle body (the Nomad's in the tank as part of the fuel pump).

thats exactly where im at. complete meanie motor, big bore, ported, cams, ported intake and throttle body. we just used the fuel reg in the nomad tank and swapped injectors to the nomad injectors. its up and running, just need the different timing curve the ecu in the mean streak has

[MAS Tequila]

Where are you located?

Do you have the Meanie wiring harness?

[extreemthrottle]

Originally Posted by MAS Tequila

Where are you located?

Do you have the Meanie wiring harness?

west palm beach, fl.
i have the nomad harness. i was told the plugs on the ecu are the same. i hope

i pm'd you

[VulcanE]

The ECU for a 1600 Meanie will plug and play on the Nomad (1600), but there are things that will have to be changed to get it to run right, check my PM I sent you.