Go Back   Vulcan Bagger Forums > General > Forum Support & Feedback

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-20-2017, 10:24 PM   #1
elnomad   elnomad is offline
Jr. Member
 
elnomad's Avatar
 
Join Date: Feb 2008
Location: Colorado Springs, CO
Posts: 25
Signature block and picture

I've created and saved a signature block including a picture within the required sizing. However it doesn't show up. I logged off then logged back in and still nothing. Am I missing something? TIA
__________________
Eric Larson
Colorado Springs
2005 Nomad 1600
VBA #401
VROC #12592



Login or Register to Remove Ads
 
Reply With Quote
Old 05-20-2017, 10:26 PM   #2
elnomad   elnomad is offline
Jr. Member
 
elnomad's Avatar
 
Join Date: Feb 2008
Location: Colorado Springs, CO
Posts: 25
Okay, now I see it but no picture. Must not post to pre-existing posts?
__________________
Eric Larson
Colorado Springs
2005 Nomad 1600
VBA #401
VROC #12592
 
Reply With Quote
Old 05-23-2017, 09:12 AM   #3
BudMan   BudMan is offline
 
BudMan's Avatar
 
Join Date: May 2009
Location: Greenwood, Ark.
Posts: 4,736
Hit preview and see that it's there.
Then of course click save. It should change previous post as well
__________________


Dave Jesse
2012 1700 Gray/Black Voyager
2006 1600 Nomad Green/Silver Sold
VBA #1108

2010- Eureka Springs - Antlers - 2011- Maggie Valley - Antlers
2012- Margaritaville Ride - Van Buren - Antlers - 2013- Estes Park - Antlers
2014- Mountain View - Antlers - 2015- Eureka Springs - Antlers
2016- Salem - Antlers - 2017- Eureka Springs - Lake George - Antlers - 2018- Custer - Antlers

Last edited by BudMan; 05-23-2017 at 09:15 AM.
 
Reply With Quote
Old 07-21-2017, 11:08 AM   #4
SmokeHavel   SmokeHavel is offline
Member
 
SmokeHavel's Avatar
 
Join Date: Jun 2017
Location: Kansas / Saudi Arabia
Posts: 52
Quote:
Originally Posted by elnomad View Post
Okay, now I see it but no picture. Must not post to pre-existing posts?
On the page to create you signature, in the signature picture area, next to your picture is a link to insert signature picture... just above the check box to remove a picture.

Hit the link only once, wait a few seconds then look in the create signature area and you should see some brackets with SIGPIC in them (two side by side), this is the picture.

Now go to preview and you should see your picture.

And don't forget to save the signature.
__________________


There are many like it... but this one is mine!!
My 2011 Kawasaki Vulcan 1700 Nomad:
-Ivan's ECU Flash
-Garry's fork brace
-Neutrino Element ECM
-Vizi-Tech SupaBrake 3 brake light modulator
-Ram Mount cell phone holder
-Grasshopper driver back rest


IBA #68409
VBA #3599
 
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.