Voltage regulator - Page 2

**Sabre-t** · 02-25-2018, 02:12 PM

You don't need a diode tester. This is clipped straight from the Voyager service manual:

R-R Resistance Readings 2010 Voyager.jpg

All of these need to be done on both R/Rs.

**Sabre-t** · 02-25-2018, 02:14 PM

Oh and the pinouts of the R/Rs:

R-R Pinouts 2010 Voyager.jpg

Win_surfur · 02-26-2018, 07:07 PM

New regulators installed today and are showing min at 14.4v and max at 14.8v on hot bike at 3,000 rpm. Amp is performing great and not going into protect mode.

**Sabre-t** · 02-27-2018, 01:46 AM

Glad they got it fixed!

Win_surfur · 02-27-2018, 01:46 PM

Quote:

Originally Posted by Sabre-t

Glad they got it fixed!

Yeah me too. What a huge hassle this was. Lesson learned. Just because a friend recommends a shop and they have great rates, doesn't mean they'll do good work. Look at the body of work and make the decision, next time.

02-25-2018, 02:12 PM	#16
Sabre-t Join Date: May 2015 Location: Marietta, GA Posts: 838	You don't need a diode tester. This is clipped straight from the Voyager service manual: R-R Resistance Readings 2010 Voyager.jpg All of these need to be done on both R/Rs. Login or Register to Remove Ads
	0

02-26-2018, 07:07 PM	#18
Win_surfur Member Join Date: Dec 2012 Location: Nashville, TN Posts: 166	New regulators installed today and are showing min at 14.4v and max at 14.8v on hot bike at 3,000 rpm. Amp is performing great and not going into protect mode. __________________ Peace ~ Win_surfur ~~~~~~~~~~~~ 2011 Voyager Kury ISO grips V&H Twin Slash Cobra FI2000R Chucksters BAK Ray's Throttle Mod 4 Polk DB521 Alpine KTP-445U Amp
	0

02-25-2018, 02:14 PM	#17
Sabre-t Join Date: May 2015 Location: Marietta, GA Posts: 838	Oh and the pinouts of the R/Rs: R-R Pinouts 2010 Voyager.jpg
	0

02-27-2018, 01:46 AM	#19
Sabre-t Join Date: May 2015 Location: Marietta, GA Posts: 838	Glad they got it fixed!
	0