Stebel wards off peaceful driver - Page 2

Peg · 10-25-2018, 01:08 AM

Quote:

Originally Posted by mbarr10

Well... there you go, No Stable horn for me. Just looking for STABLE people

You won't find many of those in here.

**plumber63** · 10-25-2018, 07:50 AM

Quote:

Originally Posted by Badger: Black Hills

In my opinion neither this post nor any other that resorts to name-calling, unsupported statements of so-called facts or uses foul language should be allowed on this forum.

I agree with you 100%.

I also believe politics don't belong here either. There is a section for that.

Scootergptx · 10-25-2018, 08:14 AM

I have on Bad Boy on my Suzuki and it went out.

Had to fab a mount for it. When I got it where it was good, I tightened everything up. Forget to put some coating on the connectors. When those were cleaned up and sealed, it worked fine again.

DragonLady58 · 10-30-2018, 01:20 AM

Wolo under left hand side cover....mucho years and still going strong....

ak602 · 11-17-2018, 10:32 AM

Did you guys add the relay when you put in the stebel horn?

Lumberjack · 11-17-2018, 06:32 PM

You should or will burn switch out. It says to use relay in the instructions

Quote:

Originally Posted by ak602

Did you guys add the relay when you put in the stebel horn?

Brydgy · 11-19-2018, 01:26 AM

Quote:

Originally Posted by DragonLady58

Wolo under left hand side cover....mucho years and still going strong....

Hi DL, Could you please tell me which model of the Wolo you are using. Thanks.

bladenbullet · 01-25-2019, 06:29 PM

Quote:

Originally Posted by ak602

Did you guys add the relay when you put in the stebel horn?

the relay is a simple install as the horn uses hot and ground wires making perfect signal wires for the relay...all thats needed is a hot lead to the air horn...most people dont even realize the horn is there until i point it out...just below the ignition...

i love how fast a car moves back into its lane when i lay on the stebel...

DragonLady58 · 01-26-2019, 12:36 AM

Quote:

Originally Posted by Brydgy

Hi DL, Could you please tell me which model of the Wolo you are using. Thanks.

Wolo Badboy under left hand side cover....after a soccer mom almost made me into a hood ornament in OKC, I needed a something that could be heard!
Besided, that stock horn is worse than a shorted out volkwagen horn....

I could pass gas louder than the stocker....

Brydgy · 01-30-2019, 11:02 AM

Quote:

Originally Posted by DragonLady58

Wolo Badboy under left hand side cover....after a soccer mom almost made me into a hood ornament in OKC, I needed a something that could be heard!
Besided, that stock horn is worse than a shorted out volkwagen horn....

I could pass gas louder than the stocker....

Thanks for the info DL. Appreciated. Yes, the stock "meep, meep" is very weak and I am looking to upgrade it this coming season.

DragonLady58 · 01-30-2019, 07:42 PM

Anytime a airhorn, like the stabel, bad boy or any other aftermarket horn is installed, always use a relay....keeps your button contacts nice and happy....
I just use the stock horn wires up front to trigger the relay....
Under my left hand side cover, I have a 6 fuse aux. fuse block in there, when the power switch comes on, it triggers the relay to power up the fuse block.
That fuse block powers my airhorn, my purple LED lights all over my bike, my aux. LED bag lights/ my LED driving/power for my oil/temp/voltage gauges, and my onboard air compressor for my rear air-ride system....everything is fused.

**smokier** · 01-31-2019, 07:22 AM

DL, as always, very informative and helpful information. Thank you for sharing your knowledge and experience.

DragonLady58 · 01-31-2019, 05:10 PM

Quote:

Originally Posted by smokier

DL, as always, very informative and helpful information. Thank you for sharing your knowledge and experience.

Just glad to help out....

10-25-2018, 08:14 AM	#18
Scootergptx Advanced Member Join Date: Sep 2015 Location: Grand Prairie, TX Posts: 654	I have on Bad Boy on my Suzuki and it went out. Had to fab a mount for it. When I got it where it was good, I tightened everything up. Forget to put some coating on the connectors. When those were cleaned up and sealed, it worked fine again. __________________ 2011 Vaquero V&H slip ons Roaring Toyz intake PCV (removed) Ivan's ECU flash
	0

10-30-2018, 01:20 AM	#19
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	Wolo under left hand side cover....mucho years and still going strong.... __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride!
	0

11-17-2018, 10:32 AM	#20
ak602 Member Join Date: May 2014 Location: SOMERVILLE NJ Posts: 77	Did you guys add the relay when you put in the stebel horn? Login or Register to Remove Ads
	0

01-30-2019, 07:42 PM	#26
DragonLady58 Sr. Member Join Date: Jul 2016 Location: Somewhere South of Alaska.... Posts: 2,351	Anytime a airhorn, like the stabel, bad boy or any other aftermarket horn is installed, always use a relay....keeps your button contacts nice and happy.... I just use the stock horn wires up front to trigger the relay.... Under my left hand side cover, I have a 6 fuse aux. fuse block in there, when the power switch comes on, it triggers the relay to power up the fuse block. That fuse block powers my airhorn, my purple LED lights all over my bike, my aux. LED bag lights/ my LED driving/power for my oil/temp/voltage gauges, and my onboard air compressor for my rear air-ride system....everything is fused. __________________ --------------------- Don't start no schit, there won't be no schit.... My Sarcasm is directly proportional to the amount of Stupidity involved --------------------- VBA#03239 VROC#37400 VRA --------------------- 2014 Vaquero 2001 Nomad FI 2003 Street Glide (sold) 1500 Meanie, fresh rebuild (sold) 90s BUBF Bobber (sold) 2001 UltraCycle FatPounder (Sold) 1975 HD ElectraGlide (Sold) 1982 Kawasaki Z1 Chopper (Sold) Suck It Up & Ride!
	0

01-31-2019, 07:22 AM	#27
smokier Join Date: May 2015 Location: DBQ Iowa Posts: 1,807	DL, as always, very informative and helpful information. Thank you for sharing your knowledge and experience.
	0