Batwing Fairing! Which one should I go for? - Page 13

Monkeyman · 01-28-2012, 01:52 PM

It does sound like fun.

mobandy78 · 01-30-2012, 03:25 PM

Hey Caddy, any luck on the gauges or windshield?

Caddyman · 01-30-2012, 06:56 PM

Quote:

Originally Posted by mobandy78

Hey Caddy, any luck on the gauges or windshield?

Just purchased the gauges from a really nice guy from Wisconsin who will be shipping them to my container in the next few days. He just recently upgraded his gauges on his Ultra and they are he tells me in "as new" condition. They have the aftermarket bezels as well and look very nice.
See the photo and judge for yourself!

Didn't get the windshield yet as work has been piling up but I should make a decision shortly where I am going to get it as I have decided to get a 5" clear screen.

mobandy78 · 01-30-2012, 09:09 PM

They look good Caddy! I think I may be just as excited about your project as you are.

Caddyman · 01-31-2012, 04:27 AM

Quote:

Originally Posted by mobandy78

They look good Caddy! I think I may just as excited about your project as you are.

I might have to start charging you!

**ringadingh** · 01-31-2012, 11:02 AM

Caddy; Nice looking gauges! what is the diameter of the small gauges in the pic. Or perhaps you don't have them yet.

Monkeyman · 01-31-2012, 11:55 AM

Caddyman --- The gauge in the center is ambient air temp. Don't count on it being terribly accurate. I've heard everything from 10 to 40 degrees off. At least it'll match the rest.

Caddyman · 01-31-2012, 12:09 PM

Quote:

Originally Posted by ringadingh

Caddy; Nice looking gauges! what is the diameter of the small gauges in the pic. Or perhaps you don't have them yet.

Won't have them for about ten days.

Caddyman · 01-31-2012, 12:11 PM

Quote:

Originally Posted by Monkeyman

Caddyman --- The gauge in the center is ambient air temp. Don't count on it being terribly accurate. I've heard everything from 10 to 40 degrees off. At least it'll match the rest.

You're right Monkeyman, as long as they match up I'll be happy

**ringadingh** · 01-31-2012, 12:30 PM

Is the speedometer an electronic one or is it cable operated? If its electronic you may be able to make it functional on the bike.

Caddyman · 01-31-2012, 12:43 PM

Quote:

Originally Posted by ringadingh

Is the speedometer an electronic one or is it cable operated? If its electronic you may be able to make it functional on the bike.

It's from a 2009 Ultra so I assume it is electronic! Can you run both it and the stock one on the tank at the same time? It would be nice if you could.

**ringadingh** · 01-31-2012, 12:56 PM

You probably could run them both, you would need the HD speed sensor and see if you could wire it to the bike. Assuming it could be done you would have both speedos operable. Or you may be able to tap into the kawi speedo sensor and see if it will run both gauges accurately. Its a bit of trial and error to see what will work with that one.

Monkeyman · 01-31-2012, 01:12 PM

Just figure out how to run the HD speedo. Make sure the fuel gauge is as accurate is the Kaw one is (which means, it registers something) then remove the Kaw speedo and fill in the tank. I wouldn't mind doing that some day with mine. Smooth tanks ROCK!

Caddyman · 01-31-2012, 06:59 PM

Quote:

Originally Posted by Monkeyman

Just figure out how to run the HD speedo. Make sure the fuel gauge is as accurate is the Kaw one is (which means, it registers something) then remove the Kaw speedo and fill in the tank. I wouldn't mind doing that some day with mine. Smooth tanks ROCK!

My mechanic and I were just talking about doing that very thing when I called to see my bike last night. I will have to see photos of what it would look like before I would give him the go ahead. The bike has been with him for weeks at this stage as he has been polishing any parts of aluminum that he can see on the bike, he has also given it a full service as well as change the brake pads and fluid and wire in some extra led brake lights I bought on eBay recently. We have been waiting weeks for my tyres to arrive which they did yesterday. A new front and rear Avon Venom X.
Here's a couple of pictures I took last night. (The new rear Avon Venom x is on the right and the old rear tyre which is a Metzler 880 is on the left.)

Caddyman · 01-31-2012, 07:01 PM

Quote:

Originally Posted by ringadingh

You probably could run them both, you would need the HD speed sensor and see if you could wire it to the bike. Assuming it could be done you would have both speedos operable. Or you may be able to tap into the kawi speedo sensor and see if it will run both gauges accurately. Its a bit of trial and error to see what will work with that one.

I can see us doing MUCH more chatting when all the parts arrive

01-28-2012, 01:52 PM	#181
Monkeyman Top Contributor Join Date: Aug 2011 Location: North Wilkesboro, NC Posts: 6,289	It does sound like fun. __________________ Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860 Login or Register to Remove Ads
	0

01-30-2012, 03:25 PM	#182
mobandy78 Sr. Member Join Date: Sep 2009 Location: Owasso, OK Posts: 1,485	Hey Caddy, any luck on the gauges or windshield? __________________ Matt "Mo" Moore Owasso, Oklahoma VBA #1250 2005 Nomad 1600 - Darkside "There is no normal life, there's just life. So get on with it." - Doc Holiday
	0

01-30-2012, 09:09 PM	#184
mobandy78 Sr. Member Join Date: Sep 2009 Location: Owasso, OK Posts: 1,485	They look good Caddy! I think I may be just as excited about your project as you are. __________________ Matt "Mo" Moore Owasso, Oklahoma VBA #1250 2005 Nomad 1600 - Darkside "There is no normal life, there's just life. So get on with it." - Doc Holiday Last edited by mobandy78; 01-31-2012 at 11:34 AM.
	0

01-31-2012, 11:02 AM	#186
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Caddy; Nice looking gauges! what is the diameter of the small gauges in the pic. Or perhaps you don't have them yet. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

01-31-2012, 11:55 AM	#187
Monkeyman Top Contributor Join Date: Aug 2011 Location: North Wilkesboro, NC Posts: 6,289	Caddyman --- The gauge in the center is ambient air temp. Don't count on it being terribly accurate. I've heard everything from 10 to 40 degrees off. At least it'll match the rest. __________________ Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860
	0

01-31-2012, 12:30 PM	#190
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	Is the speedometer an electronic one or is it cable operated? If its electronic you may be able to make it functional on the bike. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

01-31-2012, 12:56 PM	#192
ringadingh Join Date: Aug 2007 Location: Newmarket Ontario Canada Posts: 35,387	You probably could run them both, you would need the HD speed sensor and see if you could wire it to the bike. Assuming it could be done you would have both speedos operable. Or you may be able to tap into the kawi speedo sensor and see if it will run both gauges accurately. Its a bit of trial and error to see what will work with that one. __________________ 2002 Nomad aka Bountyhunter VBA #27 VROC #18951
	0

01-31-2012, 01:12 PM	#193
Monkeyman Top Contributor Join Date: Aug 2011 Location: North Wilkesboro, NC Posts: 6,289	Just figure out how to run the HD speedo. Make sure the fuel gauge is as accurate is the Kaw one is (which means, it registers something) then remove the Kaw speedo and fill in the tank. I wouldn't mind doing that some day with mine. Smooth tanks ROCK! __________________ Christopher "Monkeyman" Gray ---------------------------- Widows Sons "Overseers" Patriot Guard Rider USArmy 1987-1990 2021 Can Am Spyder RT 2018 Can Am Spyder RT Limited - SOLD 2014 Nomad - SOLD 2012 Victory Vision - SOLD 2007 Black Nomad - SOLD VMC #9367 VBA #1860
	0